multiple devices per card?
This card can open / close N audio streams independently. Each audio stream can be matched to a different port (e.g. mike in, line in) or the same, with different formats if necessary.
Following your earlier message, I'd guess that a) is the solution. Then, only one mixer is enough to handle all the devices.
Any other idea?
Thanks,
Guilhem.
Quoted 12 lines
Quoted 6 lines
I am unsure what makes the most sense for multiple pcm channels on the same card:
a) N devices, 1 pcm channel each
b) 1 device, N pcm channels eachIn the same vein, is the mixer always one per card?
there is no way to tell without knowing more about the hardware. for the hammerfall series, for example, case (a) makes very little sense, since there is no way to independently start and stop the N devices. but there is hardware for which it might make sense.
Quoted 4 lines
some cards have no mixer. its not impossible a card that might have two (e.g. a digital and an analog mixer).
--p
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 8 lines · Guilhem Tardy
This card can open / close N audio streams independently. Each audio stream can be matched to a different port (e.g. mike in, line in) or the same, with different formats if necessary.
Following your earlier message, I'd guess that a) is the solution. Then, only one mixer is enough to handle all the devices.
Any other idea?
I agree, a) is the right choice if all streams are independant.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf