Skip to contentSkip to conversation

softdog doesn't work on 2.4.20-pre10?

DISCUSSION Roy Sigurd Karlsbakk 2 participants 7 messages Oct 9, 2002

lore
Share & tools
lore
#0 lore raw

hi

I have the softdog running on some of my machines, and I noticed it didn't work very well. I've got this little program feeding the dog (attached), so if it gets killed, the machine should reboot.

but - this doesn't happen!

can anyone take a look at this?

roy

Signature · 6 lines
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356

Computers are like air conditioners.
They stop working when you open Windows.

#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <signal.h>
#include <syslog.h>
#include "watchdog.h"

#define TIMEOUT_DEFAULT 60

int fd;

void sig_any() {
	syslog(LOG_EMERG, "feedthedog killed by untrapped signal. System will be rebooted by watchdog.");
	exit(0);
}
void sig_term() {
	syslog(LOG_NOTICE, "Exiting, shutting down watchdog...");
	if (write(fd, "V", 1) == -1) {
		syslog(LOG_NOTICE, "Failed!");
		exit(1);
	}
	if (close(fd) == -1) {
		syslog(LOG_NOTICE, "Failed!");
		exit(1);
	}
	syslog(LOG_NOTICE, "Watchdog successfully shut down!");
	exit(0);
}
void get_info() {
	int timeout;
	struct watchdog_info info;

    ioctl(fd, WDIOC_GETTIMEOUT, &timeout);
    syslog(LOG_INFO, "Watchdog timeout is %d seconds\n", timeout);

	ioctl(fd, WDIOC_GETSUPPORT, &info);
	syslog(LOG_INFO, "Watchdog options: 0x%04x", info.options);
	syslog(LOG_INFO, "Watchdog firmware ver: %d", info.firmware_version);
	syslog(LOG_INFO, "Watchdog type:%s", info.identity);
}
int main() {
	int i,timeout;

	openlog("feedthedog", LOG_PID, LOG_DAEMON);

	if ((fd = open("/dev/watchdog", O_WRONLY)) == -1) {
		perror("open");
		exit(1);
	}

	timeout = atoi(getenv("WATCHDOG_TIMEOUT"));
	if (timeout <= 0) {
		syslog(LOG_WARNING, "Timeout set to %d. Using default.", timeout);
		timeout = TIMEOUT_DEFAULT;
	}

	get_info();
	for (i=1;i<=_NSIG;i++) {
		switch (i) {
			case SIGSTOP:
			case SIGKILL:
				break;
			case SIGTERM:
				signal(SIGTERM, sig_term);
				break;
			default:
				signal(i, sig_any);
				break;
		}
	}

	if (fork())
		exit(0);

	syslog(LOG_INFO, "Watchdog feeder started");

	while (1) {
		write(fd, "\0", 1);
		sleep(10);
	}

	return 0;
}
#1 lore raw
Quoted 5 lines · Roy Sigurd Karlsbakk

hi

I have the softdog running on some of my machines, and I noticed it didn't work very well. I've got this little program feeding the dog (attached), so if it gets killed, the machine should reboot.

Make sure you have no way out set

#2 lore raw
Quoted 7 lines
Quoted 5 lines

hi

I have the softdog running on some of my machines, and I noticed it didn't work very well. I've got this little program feeding the dog (attached), so if it gets killed, the machine should reboot.

Make sure you have no way out set

ok. works with no way out, but still...

When I killed 'feedthedog', I sent it a SIGKILL, so it couldn't have shut down the softdog properly.

roy

Signature · 6 lines
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356

Computers are like air conditioners.
They stop working when you open Windows.
#3 lore raw
Quoted 6 lines · Roy Sigurd Karlsbakk
Quoted 6 lines
Quoted 5 lines

hi

I have the softdog running on some of my machines, and I noticed it didn't work very well. I've got this little program feeding the dog (attached), so if it gets killed, the machine should reboot.

Quoted 6 lines
Quoted 1 line

Make sure you have no way out set

ok. works with no way out, but still...

When I killed 'feedthedog', I sent it a SIGKILL, so it couldn't have shut down the softdog properly.

Of course it did , it exited so the fil ehandles closed

#4 lore raw
Quoted 7 lines · Alan Cox
Quoted 6 lines · Roy Sigurd Karlsbakk
Quoted 6 lines
Quoted 5 lines

hi

I have the softdog running on some of my machines, and I noticed it didn't work very well. I've got this little program feeding the dog (attached), so if it gets killed, the machine should reboot.

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Make sure you have no way out set

ok. works with no way out, but still...

When I killed 'feedthedog', I sent it a SIGKILL, so it couldn't have shut down the softdog properly.

Of course it did , it exited so the fil ehandles closed

not according to Documentation/watchdog-api.txt

but

it doesn't tell if the softdog supports the send-'V'-before-close-file command to shut it down

roy

Signature · 6 lines
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356

Computers are like air conditioners.
They stop working when you open Windows.
#5 lore raw
Quoted 2 lines · Roy Sigurd Karlsbakk

it doesn't tell if the softdog supports the send-'V'-before-close-file command to shut it down

That is a shutdown in no way out mode. In default mode when you close the watchdog it stops

#6 lore raw
Quoted 6 lines · Alan Cox
Quoted 2 lines · Roy Sigurd Karlsbakk

it doesn't tell if the softdog supports the send-'V'-before-close-file command to shut it down

That is a shutdown in no way out mode. In default mode when you close the watchdog it stops

ok. so 'no way out' really means 'one way out'?

Signature · 6 lines
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356

Computers are like air conditioners.
They stop working when you open Windows.