Skip to contentSkip to conversation

1.0.0 Requirements, Integration of sound deamon (JACK)

DISCUSSION David Sankel 3 participants 5 messages Oct 11, 2002 – Oct 13, 2002

lore
Share & tools
lore
#0 lore raw

Hello ALSA developers,

I was wondering if there is a requirement list for
1.0.0 release of ALSA. If not, what would be expected in a 1.0.0 release? (I've got a few brain/cpu cycles to spare towards a 1.0.0 release)

I know the topic of sound deamons has really been
stomped in the ground, but I haven't found any information about the possible inclusion of the JACK sound deamon into an alsa release. Since running JACK does not lock up any of the sound device files, all non-JACK-aware programs will act normally while the deamon is running.

David Sankel
[email protected]
Electron Consulting

__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw
Quoted 7 lines · David Sankel

Hello ALSA developers,

I was wondering if there is a requirement list for
1.0.0 release of ALSA. If not, what would be expected in a 1.0.0 release? (I've got a few brain/cpu cycles to spare towards a 1.0.0 release)

Quoted 8 lines

I know the topic of sound deamons has really been
stomped in the ground, but I haven't found any information about the possible inclusion of the JACK sound deamon into an alsa release. Since running JACK does not lock up any of the sound device files, all non-JACK-aware programs will act normally while the deamon is running.

Have you used JACK?

AFAIK it definitely requires a pcm. You may have used it on hardware that supports multiopen which would explain what you have observed.

Signature · 17 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================

"Um...symbol_get and symbol_put... They're
kindof like does anyone remember like get_symbol
and put_symbol I think we used to have..."
- Rusty Russell in his talk on the module subsystem



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#2 lore raw
Quoted 6 lines

Have you used JACK?

AFAIK it definitely requires a pcm. You may have used it on hardware
that supports multiopen which would explain what you have observed.

Yes, I have used jack. I meant that it doesn't open the sound device when it is not being used by a host application.

__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw
Quoted 10 lines · David Sankel
Quoted 5 lines

Have you used JACK?

AFAIK it definitely requires a pcm. You may have
used it on hardware that supports multiopen which would explain what you have observed.

Yes, I have used jack. I meant that it doesn't open the sound device when it is not being used by a host application.

I'm pretty sure it does. In order to run it needs to claim a pcm device (or multiple devices as specified in an .asoundrc). I just tested that by starting jackd and then trying to start alsaplayer on the same device and jackd blocks alsaplayer until it is shutdown then alsaplayer will start.

Signature · 17 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================

"Um...symbol_get and symbol_put... They're
kindof like does anyone remember like get_symbol
and put_symbol I think we used to have..."
- Rusty Russell in his talk on the module subsystem



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#4 lore raw
In reply to David Sankel
Quoted 2 lines · David Sankel

Yes, I have used jack. I meant that it doesn't open the sound device when it is not being used by a host application.

Actually, I think it does. From the moment you start jackd it will open the playback (and recording, depending on the options) devices. At least, that's what I see with with jack 0.38.0, and possible newer releases.

Andy

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf