Bug in documentation for --syn?
I was looking at the documentation and code for --syn in 1.2.7a (and earlier versions) and the man page appears to be a little confused on this point. It states:
"Only match TCP packets with the SYN bit set and the ACK and FIN bits cleared."
but then goes on to say...
"It is equivalent to --tcp-flags SYN,RST,ACK SYN."
Shouldn't that first part read like this?
"Only match TCP packets with the SYN bit set and the ACK and RST bits cleared."
^^^
The code backs this up as well (from libipt_tcp.c):
case '3':
if (*flags & TCP_FLAGS)
exit_error(PARAMETER_PROBLEM,
"Only one of `--syn' or `--tcp-flags' "
" allowed");
parse_tcp_flags(tcpinfo, "SYN,RST,ACK", "SYN", invert);Or am I just missing something here? Thanks!
Signature · 3 lines
Steve Snodgrass * [email protected] * Network and Unix Guru(?) at Large Geek Code: GCS d? s: a C++ US++++$ P+++ L+ w PS+ 5++ b++ DI+ D++ e++ r+++ y+* "If you want to be somebody else, change your mind." -Sister Hazel
Quoted 4 lines · Steve Snodgrass
Shouldn't that first part read like this?
"Only match TCP packets with the SYN bit set and the ACK and RST bits cleared." ^^^
yes, at least then everything is in consistency.
Signature · 5 lines
Live long and prosper - Harald Welte / [email protected] http://www.gnumonks.org/ ============================================================================ "If this were a dictatorship, it'd be a heck of a lot easier, just so long as I'm the dictator." -- George W. Bush Dec 18, 2000