Skip to contentSkip to conversation

Problem in NAT between ipsec gateway and ipsec client

DISCUSSION tin man chan 1 participant 1 message Nov 27, 2002 netfilter

lore
Share & tools
lore
#0 lore raw

Hi,

I have setup the following network and wish the ipsec client behind a Linux NAT box can connect to ipsec gateway.

----------        ---------        -----------
| IPSec  |  LAN1  | Linux |  LAN2  | IPSec   |
|        |--------| NAT   |--------|         |
| client |        | Box   |        | Gateway |
----------        ---------        -----------

In the Linux box, I type the following command to enable NAT

echo "1" > /proc/sys/net/ipv4/ip_forward iptables -A FORWARD -i $INT -j ACCEPT iptables -t nat -A POSTROUTING -o $EXT -j MASQUERADE

The client can connect to any pc behind NAT but it cannot make a ipsec tunnel to ipsec gateway. I have used tcpdump to check that there are udp packets (dport 500) coming from IPSec client via NAT to IPSec gateway but the gateway does not response to the packets. Of course, the IPSec client and gateway can work when there is no NAT between.

Any idea or comment? Do I need to patch iptables or kernel? If yes, where can I get the patch? Thanks a lot.

William

_________________________________________________________
人氣交友熱線#9351 話「友」就有
http://hk.yahoo.com/promotions/personals/9351