2.5.40 compile errors with my CONFIG options (included)
drivers/built-in.o: In function `kd_nosound':
drivers/built-in.o(.text+0x110b0): undefined reference to input_event' drivers/built-in.o(.text+0x110cd): undefined reference to input_event' drivers/built-in.o: In function `kd_mksound':
drivers/built-in.o(.text+0x1117a): undefined reference to input_event' drivers/built-in.o: In function kbd_bh':
drivers/built-in.o(.text+0x1200a): undefined reference to input_event' drivers/built-in.o(.text+0x12018): undefined reference to input_event' drivers/built-in.o(.text+0x12029): more undefined references to input_event' follow drivers/built-in.o: In function kbd_connect':
drivers/built-in.o(.text+0x1245f): undefined reference to input_open_device' drivers/built-in.o: In function kbd_disconnect':
drivers/built-in.o(.text+0x12477): undefined reference to input_close_device' drivers/built-in.o: In function kbd_init':
drivers/built-in.o(.init.text+0x216e): undefined reference to `input_register_handler'
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_SWAP=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# General setup
#CONFIG_NET=yCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=y
#
# Loadable module support
#CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not setCONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not setCONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=y
# CONFIG_EDD is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
#
# ACPI Support
#
# CONFIG_ACPI is not set
# CONFIG_PM is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not setCONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not setCONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_NBD=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=32768CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_IDEPCI_SHARE_IRQ is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not setCONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NFORCE is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not setCONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not setCONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not setCONFIG_MD_RAID5=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not setCONFIG_UNIX=y
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not setCONFIG_EEPRO100=m
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not setCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Userland interfaces
#
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
#
# Input Device Drivers
#
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#CONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_FAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=yCONFIG_DEVFS_FS=yCONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not setCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_AFS_FS is not setCONFIG_ZISOFS_FS=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not setCONFIG_ZLIB_INFLATE=yCONFIG_X86_BIOS_REBOOT=y
AH!!! You need CONFIG_INPUT set to you the VT console system. I'm going to make a patch for that tonight.
Quoted 725 lines · David Ashley
drivers/built-in.o: In function `kd_nosound':
drivers/built-in.o(.text+0x110b0): undefined reference toinput_event' drivers/built-in.o(.text+0x110cd): undefined reference toinput_event'drivers/built-in.o: In function `kd_mksound':
drivers/built-in.o(.text+0x1117a): undefined reference toinput_event' drivers/built-in.o: In functionkbd_bh':
drivers/built-in.o(.text+0x1200a): undefined reference toinput_event' drivers/built-in.o(.text+0x12018): undefined reference toinput_event' drivers/built-in.o(.text+0x12029): more undefined references toinput_event' follow drivers/built-in.o: In functionkbd_connect':
drivers/built-in.o(.text+0x1245f): undefined reference toinput_open_device' drivers/built-in.o: In functionkbd_disconnect':
drivers/built-in.o(.text+0x12477): undefined reference toinput_close_device' drivers/built-in.o: In functionkbd_init':
drivers/built-in.o(.init.text+0x216e): undefined reference to `input_register_handler'#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_SWAP=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y#
# General setup
#CONFIG_NET=yCONFIG_SYSVIPC=y
#CONFIG_BSD_PROCESS_ACCTis not setCONFIG_SYSCTL=y#
# Loadable module support
#CONFIG_MODULES=y
#CONFIG_MODULE_UNLOADis not set
#CONFIG_MODULE_FORCE_UNLOADis not setCONFIG_KMOD=y#
# Processor type and features
#
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not setCONFIG_MPENTIUMIII=y
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MELANis not set
#CONFIG_MCRUSOEis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP2is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MCYRIXIIIis not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=y
#CONFIG_HUGETLB_PAGEis not set
#CONFIG_SMPis not setCONFIG_PREEMPT=y
#CONFIG_X86_UP_APICis not set
#CONFIG_X86_MCEis not set
#CONFIG_CPU_FREQis not set
#CONFIG_TOSHIBAis not set
#CONFIG_I8Kis not set
#CONFIG_MICROCODEis not set
#CONFIG_X86_MSRis not setCONFIG_X86_CPUID=y
#CONFIG_EDDis not setCONFIG_NOHIGHMEM=y
#CONFIG_HIGHMEM4Gis not set
#CONFIG_HIGHMEM64Gis not set
#CONFIG_MATH_EMULATIONis not setCONFIG_MTRR=yCONFIG_HAVE_DEC_LOCK=y#
# Power management options (ACPI, APM)
##
# ACPI Support
#
#CONFIG_ACPIis not set
#CONFIG_PMis not set#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
#CONFIG_PCI_GOBIOSis not set
#CONFIG_PCI_GODIRECTis not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
#CONFIG_SCx200is not setCONFIG_PCI_NAMES=y
#CONFIG_ISAis not set
#CONFIG_MCAis not set
#CONFIG_HOTPLUGis not set#
# Executable file formats
#CONFIG_KCORE_ELF=y
#CONFIG_KCORE_AOUTis not set
#CONFIG_BINFMT_AOUTis not setCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=y#
# Memory Technology Devices (MTD)
#
#CONFIG_MTDis not set#
# Parallel port support
#
#CONFIG_PARPORTis not set#
# Plug and Play configuration
#
#CONFIG_PNPis not set#
# Block devices
#
#CONFIG_BLK_DEV_FDis not set
#CONFIG_BLK_CPQ_DAis not setCONFIG_BLK_CPQ_CISS_DA=m
#CONFIG_CISS_SCSI_TAPEis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_NBD=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=32768CONFIG_BLK_DEV_INITRD=y
#CONFIG_LBDis not set#
# ATA/ATAPI/MFM/RLL device support
#CONFIG_IDE=y#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y#
# Please seeDocumentation/ide.txtfor help/info on IDE drives #
#CONFIG_BLK_DEV_HD_IDEis not set
#CONFIG_BLK_DEV_HDis not setCONFIG_BLK_DEV_IDEDISK=y
#CONFIG_IDEDISK_MULTI_MODEis not set
#CONFIG_IDEDISK_STROKEis not setCONFIG_BLK_DEV_IDECD=y
#CONFIG_BLK_DEV_IDEFLOPPYis not set
#CONFIG_BLK_DEV_IDESCSIis not set
#CONFIG_IDE_TASK_IOCTLis not set#
# IDE chipset support/bugfixes
#
#CONFIG_BLK_DEV_CMD640is not setCONFIG_BLK_DEV_IDEPCI=y
#CONFIG_BLK_DEV_GENERICis not set
#CONFIG_IDEPCI_SHARE_IRQis not setCONFIG_BLK_DEV_IDEDMA_PCI=y
#CONFIG_BLK_DEV_IDE_TCQis not set
#CONFIG_BLK_DEV_OFFBOARDis not set
#CONFIG_BLK_DEV_IDEDMA_FORCEDis not setCONFIG_IDEDMA_PCI_AUTO=y
#CONFIG_IDEDMA_ONLYDISKis not setCONFIG_BLK_DEV_IDEDMA=y
#CONFIG_IDEDMA_PCI_WIPis not setCONFIG_BLK_DEV_ADMA=y
#CONFIG_BLK_DEV_AEC62XXis not set
#CONFIG_BLK_DEV_ALI15X3is not set
#CONFIG_BLK_DEV_AMD74XXis not set
#CONFIG_BLK_DEV_CMD64Xis not set
#CONFIG_BLK_DEV_CY82C693is not set
#CONFIG_BLK_DEV_CS5520is not set
#CONFIG_BLK_DEV_HPT34Xis not set
#CONFIG_BLK_DEV_HPT366is not set
#CONFIG_BLK_DEV_SC1200is not setCONFIG_BLK_DEV_PIIX=y
#CONFIG_BLK_DEV_NFORCEis not set
#CONFIG_BLK_DEV_NS87415is not set
#CONFIG_BLK_DEV_OPTI621is not set
#CONFIG_BLK_DEV_PDC202XX_OLDis not set
#CONFIG_BLK_DEV_PDC202XX_NEWis not set
#CONFIG_BLK_DEV_RZ1000is not setCONFIG_BLK_DEV_SVWKS=y
#CONFIG_BLK_DEV_SIIMAGEis not set
#CONFIG_BLK_DEV_SIS5513is not set
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not set
#CONFIG_BLK_DEV_VIA82CXXXis not setCONFIG_IDEDMA_AUTO=y
#CONFIG_IDEDMA_IVBis not setCONFIG_BLK_DEV_IDE_MODES=y#
# SCSI device support
#CONFIG_SCSI=y#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
#CONFIG_CHR_DEV_STis not set
#CONFIG_CHR_DEV_OSSTis not set
#CONFIG_BLK_DEV_SRis not set
#CONFIG_CHR_DEV_SGis not set#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
#CONFIG_SCSI_MULTI_LUNis not set
#CONFIG_SCSI_REPORT_LUNSis not set
#CONFIG_SCSI_CONSTANTSis not set
#CONFIG_SCSI_LOGGINGis not set#
# SCSI low-level drivers
#
#CONFIG_BLK_DEV_3W_XXXX_RAIDis not set
#CONFIG_SCSI_ACARDis not set
#CONFIG_SCSI_AACRAIDis not set
#CONFIG_SCSI_AIC7XXXis not set
#CONFIG_SCSI_AIC7XXX_OLDis not set
#CONFIG_SCSI_DPT_I2Ois not set
#CONFIG_SCSI_ADVANSYSis not set
#CONFIG_SCSI_IN2000is not set
#CONFIG_SCSI_AM53C974is not set
#CONFIG_SCSI_MEGARAIDis not set
#CONFIG_SCSI_BUSLOGICis not set
#CONFIG_SCSI_CPQFCTSis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_EATA_DMAis not set
#CONFIG_SCSI_EATA_PIOis not set
#CONFIG_SCSI_FUTURE_DOMAINis not set
#CONFIG_SCSI_GDTHis not set
#CONFIG_SCSI_GENERIC_NCR5380is not set
#CONFIG_SCSI_GENERIC_NCR5380_MMIOis not set
#CONFIG_SCSI_IPSis not set
#CONFIG_SCSI_INITIOis not set
#CONFIG_SCSI_INIA100is not set
#CONFIG_SCSI_NCR53C7xxis not set
#CONFIG_SCSI_SYM53C8XX_2is not set
#CONFIG_SCSI_NCR53C8XXis not set
#CONFIG_SCSI_SYM53C8XXis not set
#CONFIG_SCSI_PCI2000is not set
#CONFIG_SCSI_PCI2220Iis not set
#CONFIG_SCSI_QLOGIC_ISPis not set
#CONFIG_SCSI_QLOGIC_FCis not set
#CONFIG_SCSI_QLOGIC_1280is not set
#CONFIG_SCSI_DC390Tis not set
#CONFIG_SCSI_U14_34Fis not set
#CONFIG_SCSI_NSP32is not set
#CONFIG_SCSI_DEBUGis not set#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=y
#CONFIG_MD_LINEARis not setCONFIG_MD_RAID0=y
#CONFIG_MD_RAID1is not setCONFIG_MD_RAID5=y
#CONFIG_MD_MULTIPATHis not set
#CONFIG_BLK_DEV_DMis not set#
# Fusion MPT device support
#
#CONFIG_FUSIONis not set#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
#CONFIG_IEEE1394is not set#
# I2O device support
#
#CONFIG_I2Ois not set#
# Networking options
#CONFIG_PACKET=y
#CONFIG_PACKET_MMAPis not set
#CONFIG_NETLINK_DEVis not set
#CONFIG_NETFILTERis not set
#CONFIG_FILTERis not setCONFIG_UNIX=y
#CONFIG_NET_KEYis not setCONFIG_INET=y
#CONFIG_IP_MULTICASTis not set
#CONFIG_IP_ADVANCED_ROUTERis not set
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not set
#CONFIG_ARPDis not set
#CONFIG_INET_ECNis not set
#CONFIG_SYN_COOKIESis not set
#CONFIG_INET_AHis not set
#CONFIG_INET_ESPis not set
#CONFIG_XFRM_USERis not set
#CONFIG_IPV6is not set#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
#CONFIG_IP_SCTPis not set
#CONFIG_ATMis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_LLCis not set
#CONFIG_DECNETis not set
#CONFIG_BRIDGEis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_NET_DIVERTis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set
#CONFIG_NET_FASTROUTEis not set
#CONFIG_NET_HW_FLOWCONTROLis not set#
# QoS and/or fair queueing
#
#CONFIG_NET_SCHEDis not set#
# Network testing
#
#CONFIG_NET_PKTGENis not set#
# Network device support
#CONFIG_NETDEVICES=y#
# ARCnet devices
#
#CONFIG_ARCNETis not setCONFIG_DUMMY=y
#CONFIG_BONDINGis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set
#CONFIG_ETHERTAPis not set#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
#CONFIG_HAPPYMEALis not set
#CONFIG_SUNGEMis not set
#CONFIG_NET_VENDOR_3COMis not set
#CONFIG_NET_VENDOR_SMCis not set
#CONFIG_NET_VENDOR_RACALis not set#
# Tulip family network device support
#
#CONFIG_NET_TULIPis not set
#CONFIG_HP100is not setCONFIG_NET_PCI=y
#CONFIG_PCNET32is not set
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_B44is not set
#CONFIG_DGRSis not setCONFIG_EEPRO100=m
#CONFIG_E100is not set
#CONFIG_FEALNXis not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not set
#CONFIG_8139CPis not setCONFIG_8139TOO=y
#CONFIG_8139TOO_PIOis not set
#CONFIG_8139TOO_TUNE_TWISTERis not set
#CONFIG_8139TOO_8129is not set
#CONFIG_8139_OLD_RX_RESETis not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_VIA_RHINEis not set
#CONFIG_NET_POCKETis not set#
# Ethernet (1000 Mbit)
#
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_E1000is not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_SK98LINis not set
#CONFIG_TIGON3is not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set#
# Wireless LAN (non-hamradio)
#
#CONFIG_NET_RADIOis not set#
# Token Ring devices (depends on LLC=y)
#
#CONFIG_NET_FCis not set
#CONFIG_RCPCIis not set
#CONFIG_SHAPERis not set#
# Wan interfaces
#
#CONFIG_WANis not set#
# Amateur Radio support
#
#CONFIG_HAMRADIOis not set#
# IrDA (infrared) support
#
#CONFIG_IRDAis not set#
# ISDN subsystem
#
#CONFIG_ISDN_BOOLis not set#
# Telephony Support
#
#CONFIG_PHONEis not set#
# Input device support
#
#CONFIG_INPUTis not set#
# Userland interfaces
##
# Input I/O drivers
#
#CONFIG_GAMEPORTis not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
#CONFIG_SERIO_CT82C710is not set#
# Input Device Drivers
##
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
#CONFIG_SERIAL_NONSTANDARDis not set#
# Serial drivers
#
#CONFIG_SERIAL_8250is not set#
# Non-8250 serial port support
#CONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256#
# I2C support
#
#CONFIG_I2Cis not set#
# Mice
#
#CONFIG_BUSMOUSEis not set
#CONFIG_QIC02_TAPEis not set#
# Watchdog Cards
#
#CONFIG_WATCHDOGis not set
#CONFIG_INTEL_RNGis not set
#CONFIG_AMD_RNGis not set
#CONFIG_NVRAMis not set
#CONFIG_RTCis not set
#CONFIG_GEN_RTCis not set
#CONFIG_DTLKis not set
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set
#CONFIG_SONYPIis not set#
# Ftape, the floppy tape device driver
#
#CONFIG_FTAPEis not set
#CONFIG_AGPis not set
#CONFIG_DRMis not set
#CONFIG_MWAVEis not set
#CONFIG_RAW_DRIVERis not set#
# Multimedia devices
#
#CONFIG_VIDEO_DEVis not set#
# File systems
#
#CONFIG_QUOTAis not set
#CONFIG_AUTOFS_FSis not set
#CONFIG_AUTOFS4_FSis not set
#CONFIG_REISERFS_FSis not set
#CONFIG_ADFS_FSis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_BEFS_FSis not set
#CONFIG_BFS_FSis not set
#CONFIG_EXT3_FSis not set
#CONFIG_JBDis not set
#CONFIG_FAT_FSis not set
#CONFIG_EFS_FSis not set
#CONFIG_CRAMFSis not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
#CONFIG_JFS_FSis not set
#CONFIG_MINIX_FSis not set
#CONFIG_VXFS_FSis not set
#CONFIG_NTFS_FSis not set
#CONFIG_HPFS_FSis not setCONFIG_PROC_FS=yCONFIG_DEVFS_FS=yCONFIG_DEVFS_MOUNT=y
#CONFIG_DEVFS_DEBUGis not setCONFIG_DEVPTS_FS=y
#CONFIG_QNX4FS_FSis not set
#CONFIG_ROMFS_FSis not setCONFIG_EXT2_FS=y
#CONFIG_EXT2_FS_XATTRis not set
#CONFIG_SYSV_FSis not set
#CONFIG_UDF_FSis not set
#CONFIG_UFS_FSis not set
#CONFIG_XFS_FSis not set#
# Network File Systems
#
#CONFIG_CODA_FSis not set
#CONFIG_INTERMEZZO_FSis not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
#CONFIG_NFS_V4is not set
#CONFIG_NFSDis not setCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=y
#CONFIG_EXPORTFSis not set
#CONFIG_CIFSis not set
#CONFIG_SMB_FSis not set
#CONFIG_NCP_FSis not set
#CONFIG_AFS_FSis not setCONFIG_ZISOFS_FS=y#
# Partition Types
#
#CONFIG_PARTITION_ADVANCEDis not setCONFIG_MSDOS_PARTITION=yCONFIG_NLS=y#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not set
#CONFIG_NLS_CODEPAGE_852is not set
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_CODEPAGE_1250is not set
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ISO8859_1=y
#CONFIG_NLS_ISO8859_2is not set
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not set
#CONFIG_NLS_UTF8is not set#
# Console drivers
#CONFIG_VGA_CONSOLE=y
#CONFIG_VIDEO_SELECTis not set
#CONFIG_MDA_CONSOLEis not set#
# Frame-buffer support
#
#CONFIG_FBis not set#
# Sound
#
#CONFIG_SOUNDis not set#
# USB support
#
#CONFIG_USBis not set#
# Bluetooth support
#
#CONFIG_BTis not set#
# Profiling support
#
#CONFIG_PROFILINGis not set#
# Kernel hacking
#
#CONFIG_DEBUG_KERNELis not set
#CONFIG_DEBUG_SPINLOCK_SLEEPis not set
#CONFIG_FRAME_POINTERis not set#
# Security options
#
#CONFIG_SECURITYis not set#
# Cryptographic options
#
#CONFIG_CRYPTOis not set#
# Library routines
#
#CONFIG_CRC32is not setCONFIG_ZLIB_INFLATE=yCONFIG_X86_BIOS_REBOOT=y
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
I had this same problem with 2.5.4x in general, and got this very helpful clue from Rusty Lynch:
The problem is that when Virtual Terminal support is built into the kernel (not a module) then Input support also needs to be built into the kernel because it is making function calls that are implemented in the VT section.
To fix this, change the build input support to be built in the kernel instead of building it as a module. This can be done from "make xconfig" by clicking on the "Input device support" on the left, and then change the "Input devices (needed for keyboard, mouse, ...)" so that it has
a check mark instead of a dot.
Hope this helps.
----- Original Message -----
From: "David Ashley" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 05, 2002 12:21 PM
Subject: 2.5.40 compile errors with my CONFIG options (included)
Quoted 9 lines
drivers/built-in.o: In function `kd_nosound':
drivers/built-in.o(.text+0x110b0): undefined reference toinput_event' drivers/built-in.o(.text+0x110cd): undefined reference toinput_event'drivers/built-in.o: In function `kd_mksound':
drivers/built-in.o(.text+0x1117a): undefined reference toinput_event' drivers/built-in.o: In functionkbd_bh':
drivers/built-in.o(.text+0x1200a): undefined reference toinput_event' drivers/built-in.o(.text+0x12018): undefined reference toinput_event' drivers/built-in.o(.text+0x12029): more undefined references to
`input_event' follow
Quoted 2 lines
drivers/built-in.o: In function `kbd_connect':
drivers/built-in.o(.text+0x1245f): undefined reference to
`input_open_device'
Quoted 2 lines
drivers/built-in.o: In function `kbd_disconnect':
drivers/built-in.o(.text+0x12477): undefined reference to
`input_close_device'
Quoted 2 lines
drivers/built-in.o: In function `kbd_init':
drivers/built-in.o(.init.text+0x216e): undefined reference to
`input_register_handler'
[snip]