USB changes for 2.4.20
PATCH 1/1 USB changes for 2.4.20
Hi,
Here are some USB updates for 2.4.20.
Pull from: bk://linuxusb.bkbits.net/marcelo-2.4
The individual patches will be sent in follow up messages to this email.
thanks,
greg k-h
drivers/usb/vicam.h | 81 - drivers/usb/vicamurbs.h | 324 ------ Documentation/Configure.help | 15 Documentation/usb/usb-serial.txt | 43 drivers/input/input.c | 2 drivers/usb/Config.in | 11 drivers/usb/Makefile | 3 drivers/usb/devio.c | 125 +- drivers/usb/hcd.c | 94 + drivers/usb/hcd.h | 1 drivers/usb/hcd/ehci-dbg.c | 525 +++++++++- drivers/usb/hcd/ehci-hcd.c | 512 +++++++--- drivers/usb/hcd/ehci-hub.c | 16 drivers/usb/hcd/ehci-q.c | 575 ++++++----- drivers/usb/hcd/ehci-sched.c | 630 +++++------- drivers/usb/hcd/ehci.h | 87 + drivers/usb/hid-core.c | 6 drivers/usb/hid-input.c | 2 drivers/usb/hpusbscsi.c | 25 drivers/usb/hpusbscsi.h | 1 drivers/usb/pegasus.c | 238 +++- drivers/usb/pegasus.h | 18 drivers/usb/powermate.c | 363 +++++++ drivers/usb/rtl8150.c | 1 drivers/usb/scanner.h | 26 drivers/usb/serial/io_16654.h | 16 drivers/usb/serial/io_edgeport.c | 18 drivers/usb/serial/io_ti.c | 18 drivers/usb/serial/ipaq.c | 25 drivers/usb/serial/keyspan.c | 5 drivers/usb/serial/pl2303.c | 1 drivers/usb/serial/pl2303.h | 3 drivers/usb/serial/visor.c | 6 drivers/usb/serial/visor.h | 3 drivers/usb/tiglusb.c | 46 drivers/usb/usb-midi.c | 10 drivers/usb/usb-uhci.c | 1 drivers/usb/usbnet.c | 335 +++++- drivers/usb/vicam.c | 1895 +++++++++++++++++++++++---------------- include/linux/input.h | 1 include/linux/videodev.h | 1 drivers/usb/Makefile | 0 42 files changed, 3761 insertions(+), 2347 deletions(-)
-----
[email protected], 2002-12-05 14:22:42-08:00, [email protected]
[PATCH] USB: tiglusb sync with 2.5
drivers/usb/tiglusb.c | 35 ++++++++++++++++++----------------- 1 files changed, 18 insertions(+), 17 deletions(-)
------
[email protected], 2002-12-05 14:22:32-08:00, [email protected]
[PATCH] USB requires MIDI
Driver has unresolved references to sound/MIDI symbols (linker problems) without this if USB_MIDI = Y and SOUND isn't in-kernel.
drivers/usb/Config.in | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
------
[email protected], 2002-12-05 14:22:24-08:00, [email protected]
[PATCH] Disable bluetooth.o if Bluetooth subsystem is used
This patch disables the USB Bluetooth driver (bluetooth.o) from the drivers/usb/ directory if the Linux Bluetooth subsystem is selected.
drivers/usb/Config.in | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletion(-)
------
[email protected], 2002-12-05 14:22:16-08:00, [email protected]
[PATCH] RATOC USB-60 patch
Trivial patch to get the RATOC USB60 USB-Serial converter working :
drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 3 +++ 2 files changed, 4 insertions(+)
------
[email protected], 2002-12-05 14:22:07-08:00, [email protected]
[PATCH] USB: add USB powermate driver
Matches the existing 2.5 driver support.
Documentation/Configure.help | 15 + drivers/input/input.c | 2 drivers/usb/Config.in | 1 drivers/usb/Makefile | 1 drivers/usb/hid-core.c | 6 drivers/usb/powermate.c | 363 +++++++++++++++++++++++++++++++++++++++++++ include/linux/input.h | 1 7 files changed, 389 insertions(+)
------
[email protected], 2002-12-05 14:21:57-08:00, [email protected]
[PATCH] usb-uhci, fixed memory leak with one-shot interrupt transfers
Credit goes to Georg Acher for the fix. I only reported the leak, and did the pre&post testing. Tested under 2.4.18 and 2.4.19.
drivers/usb/usb-uhci.c | 1 + 1 files changed, 1 insertion(+)
------
[email protected], 2002-12-05 14:21:46-08:00, [email protected]
[PATCH] usbdevfs: more list cleanups
Here is a small cleanup patch for 2.4 that goes on top of my previous ones. It makes devio.c use the list traversal macros from list.h.
drivers/usb/devio.c | 29 ++++++++++------------------- 1 files changed, 10 insertions(+), 19 deletions(-)
------
[email protected], 2002-12-05 14:21:38-08:00, [email protected]
[PATCH] tiglusb timeouts
It addresses the timeout parameter in the tiglusb driver.
1. timeout could be 0, causing a divide-by-zero. The patch prevents this.
2. The timeout value to usb_bulk_msg() could be rounded down to cause a divide-by-zero if timeout was < 10, e.g. 9, in:
result = usb_bulk_msg (s->dev, pipe, buffer, bytes_to_read,
&bytes_read, HZ / (timeout / 10));
9 / 10 == 0 => divide-by-zero !!
3. The timeout value above doesn't do very well on converting timeout to tenths of seconds. Even for the default timeout value of 15 (1.5 seconds), it becomes:
HZ / (15 / 10) == HZ / 1 == HZ, or 1 second.
The patch corrects this formula to use:
(HZ * 10) / timeout
drivers/usb/tiglusb.c | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-)
------
[email protected], 2002-12-05 14:21:30-08:00, [email protected]
[PATCH] USB ipaq: added support for insmod options to specify vendor/product id
this will allow people to try out new wince/pocketpc2k devices without having to recompile the module.
Documentation/usb/usb-serial.txt | 43 +++++++++------------------------------ drivers/usb/serial/ipaq.c | 22 ++++++++++++++++++- 2 files changed, 30 insertions(+), 35 deletions(-)
------
[email protected], 2002-12-05 14:21:22-08:00, [email protected]
[PATCH] USB: added Palm Tungsten W support.
Thanks to Ralf Dietrich <[email protected]> for the information.
drivers/usb/serial/visor.c | 2 ++ drivers/usb/serial/visor.h | 1 + 2 files changed, 3 insertions(+)
------
[email protected], 2002-12-05 14:21:12-08:00, [email protected]
[PATCH] usbdevfs: finalize urbs on interface release
here is a patch for 2.4 that goes on top of the previous one. It cleans up the list handling, in line with Dave's comment.
drivers/usb/devio.c | 24 ++++++++---------------- 1 files changed, 8 insertions(+), 16 deletions(-)
------
[email protected], 2002-12-05 14:21:03-08:00, [email protected]
[PATCH] USB ipaq: brown paper bag bug - uninitialized spinlock fixed.
drivers/usb/serial/ipaq.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-)
------
[email protected], 2002-12-05 14:20:55-08:00, [email protected]
[PATCH] USB: use time_before() to compare times
drivers/usb/serial/keyspan.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
------
[email protected], 2002-12-05 14:20:47-08:00, [email protected]
[PATCH] usbdevfs: finalize urbs on interface release
Description: When an urb has been submitted via usbdevfs, and is still pending when the interface it was submitted to is released, force the urb to be completed. This is the correct behaviour. It fixes an oops on system shutdown when using the user space driver for the speedtouch modem.
drivers/usb/devio.c | 72 +++++++++++++++++++++++++++++++++++++--------------- 1 files changed, 52 insertions(+), 20 deletions(-)
------
[email protected], 2002-12-05 14:20:39-08:00, [email protected]
[PATCH] USB: pegasus: the kmalloc/kfree crap removed from [get|set]_registers();
drivers/usb/pegasus.c | 238 +++++++++++++++++++++++++++++++++++--------------- drivers/usb/pegasus.h | 15 ++- 2 files changed, 180 insertions(+), 73 deletions(-)
------
[email protected], 2002-12-05 14:20:31-08:00, [email protected]
[PATCH] - use of unplugged scanner oops fix
drivers/usb/hpusbscsi.c | 23 +++++++++++++++-------- drivers/usb/hpusbscsi.h | 1 + 2 files changed, 16 insertions(+), 8 deletions(-)
------
[email protected], 2002-12-05 14:20:22-08:00, [email protected]
[PATCH] [PATCH 2.4.20-rc1] scanner.h: add/fix vendor/product ids
This patch against 2.4.20-rc1 adds some vendor/product ids for Mustek and Lexmark scanners. Also, the names of the existing Mustek scanners were fixed and the product id of the Bearpaw 1200 F was corrected.
I think that's a rather low-risk patch that can be applied. That's why I splitted it from the patch that fixes the "two-endpoints-only" issue and the "can't unload" issue of the scanner driver (posted earlier on linux-usb-devel).
drivers/usb/scanner.h | 26 ++++++++++++++++++-------- 1 files changed, 18 insertions(+), 8 deletions(-)
------
[email protected], 2002-12-05 14:20:12-08:00, [email protected]
[PATCH] usbnet talks to Zaurus
This more or less syncs the 2.4 version with the 2.5 one.
It teaches "usbnet" how to talk to the SL-5000D/SL-5500, and the A-300. It's got some cleanups of how it talks to other StrongArm PDAs -- which is most of the patch by volume, other than making the GPL explicit.
This will make Zaurus interop easier, folk won't need to find and install the "usbdnet" version which, as Pavel put it, "eats disks".
drivers/usb/usbnet.c | 335 ++++++++++++++++++++++++++++++++++++++++----------- 1 files changed, 265 insertions(+), 70 deletions(-)
------
[email protected], 2002-12-05 14:20:04-08:00, [email protected]
[PATCH] USB: added support for Palm Tungsten T devices to visor driver
drivers/usb/serial/visor.c | 2 ++ drivers/usb/serial/visor.h | 1 + 2 files changed, 3 insertions(+)
------
[email protected], 2002-12-05 14:19:56-08:00, [email protected]
[PATCH] minor fixes for compile warnings in 2.4.20pre11 , usb-2.4 tree
this patch fixes some compile warnings with the 2.4.20pre11 tree. The rtl8150.c does not compile on ppc32 because linux/init.h is missing, but the driver uses __init.
The MSR_RI is the machine state register on ppc, it seems to be a modem state register on the io edge port. The patch does just a rename, maybe it can be done in a better way..
drivers/usb/hpusbscsi.c | 2 +- drivers/usb/rtl8150.c | 1 + drivers/usb/serial/io_16654.h | 16 ++++++++-------- drivers/usb/serial/io_edgeport.c | 18 +++++++++--------- drivers/usb/serial/io_ti.c | 18 +++++++++--------- drivers/usb/serial/keyspan.c | 3 +++ 6 files changed, 31 insertions(+), 27 deletions(-)
------
[email protected], 2002-12-05 14:19:47-08:00, [email protected]
[PATCH] usb-midi patch for 2.4.20-pre11
Please, apply the attached patch for usb-midi.c (Linux kernel 2.4.20-pre11)
This patch solves some problems with MIDI IN:
- System exclusive messages corrupted.
- Other MIDI messages lost (mainly simultaneous notes).
drivers/usb/usb-midi.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)
------
[email protected], 2002-12-05 14:19:39-08:00, [email protected]
[PATCH] Add support for JTEC FA8101 USB to Ethernet device
o Add support for JTEC FA8101 USB to Ethernet device
drivers/usb/pegasus.h | 3 +++ 1 files changed, 3 insertions(+)
------
[email protected], 2002-12-05 14:19:31-08:00, [email protected]
[PATCH] removed vicamurbs.h
drivers/usb/vicamurbs.h | 324 ------------------------------------------------ 1 files changed, 324 deletions(-)
------
[email protected], 2002-12-05 14:19:21-08:00, [email protected]
[PATCH] Vicam patch against 2.4.20-pre9
Hi Greg,
I'm not sure what the correct way to submit these patches is, so I'm going to send you this one, feel free to reject it because it's in the wrong format, you want a patch against 2.5.x first or you want a patch against 2.4.20 instead.
-Joe
diff -urN linux-2.4.19/drivers/usb/Makefile
linux-2.4.19-vicam/drivers/usb/Makefile
drivers/usb/vicam.h | 81 -- drivers/usb/Makefile | 2 drivers/usb/vicam.c | 1895 ++++++++++++++++++++++++++++------------------- include/linux/videodev.h | 1 4 files changed, 1150 insertions(+), 829 deletions(-)
------
[email protected], 2002-10-21 14:48:25-07:00, [email protected]
[PATCH] USB: USB 2.0 controller and hubs bugfixes
Yes, this looks like a big patch, but for users with USB 2.0 devices it is necessary. It contains the following things:
- Key point: this works, more reliably, on a lot of hardware that previously did not work. So it's got all the bugfixes that went into 2.5 since three months into the 2.4.19 series, and a fair degree of user testing. Quite a few users have reported complete failure on their 2.4 systems until they updated ... and that the update gave them no troubles.
- Adds missing locking to some queue unlink paths. This resolves some oopsing problems (often null pointer exceptions) that were rare quite some time ago, but became more common as the driver is (a) used much more, and (b) used on faster EHCI implementations, like the VIA VT8235 and other recent silicon.
- Fixes the problems when used with cardbus. Previously if you did a physical eject without first "rmmod ehci-hcd" (or even a system shutdown, which is a cardbus issue) the system would lock up. No more.
drivers/usb/hcd.c | 94 +++--- drivers/usb/hcd.h | 1 drivers/usb/hcd/ehci-dbg.c | 525 +++++++++++++++++++++++++++++++---- drivers/usb/hcd/ehci-hcd.c | 512 +++++++++++++++++++++++++--------- drivers/usb/hcd/ehci-hub.c | 16 - drivers/usb/hcd/ehci-q.c | 575 +++++++++++++++++++++------------------ drivers/usb/hcd/ehci-sched.c | 630 +++++++++++++++++-------------------------- drivers/usb/hcd/ehci.h | 87 +++++ 8 files changed, 1552 insertions(+), 888 deletions(-)
------
[email protected], 2002-10-21 14:37:44-07:00, [email protected]
[PATCH] USB: added support for Clie NX60 device.
Thanks to Hiroyuki ARAKI <[email protected]> for the information.
drivers/usb/serial/visor.c | 2 ++ drivers/usb/serial/visor.h | 1 + 2 files changed, 3 insertions(+)
------
[email protected], 2002-10-21 13:37:47-07:00, [email protected]
Cset exclude: [email protected]|ChangeSet|20021011180213|25533
drivers/usb/hid-input.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
------