C99 initializers for drivers/scsi (2 of 4)
PATCH 1/1 C99 initializers for drivers/scsi (2 of 4)
Hi.
Here are some more patches for converting drivers/scsi to use C99 initializers. The patches are all against 2.5.51.
Art Haas
drivers/scsi/dc390.h renamed from drivers/scsi/dc390.h.old +30 -30
@@ -52,41 +52,41 @@#if LINUX_VERSION_CODE >=KERNEL_VERSION (2 ,3 ,30 )#define DC390_T { \ - proc_name: "tmscsim", \ - proc_info: DC390_proc_info, \ - name: DC390_BANNER " V" DC390_VERSION, \ - detect: DC390_detect, \ - release: DC390_release, \ - queuecommand: DC390_queue_command, \ - abort: DC390_abort, \ - reset: DC390_reset, \ - bios_param: DC390_bios_param, \ - can_queue: 42, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 16, \ - unchecked_isa_dma: 0, \ - use_clustering: DISABLE_CLUSTERING \ + .proc_name = "tmscsim", \ + .proc_info = DC390_proc_info, \ + .name = DC390_BANNER " V" DC390_VERSION, \ + .detect = DC390_detect, \ + .release = DC390_release, \ + .queuecommand = DC390_queue_command, \ + .abort = DC390_abort, \ + .reset = DC390_reset, \ + .bios_param = DC390_bios_param, \ + .can_queue = 42, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 16, \ + .unchecked_isa_dma = 0, \ + .use_clustering = DISABLE_CLUSTERING \ }#else extern struct proc_dir_entry DC390_proc_scsi_tmscsim;#define DC390_T { \ - proc_dir: &DC390_proc_scsi_tmscsim, \ - proc_info: DC390_proc_info, \ - name: DC390_BANNER " V" DC390_VERSION, \ - detect: DC390_detect, \ - release: DC390_release, \ - queuecommand: DC390_queue_command, \ - abort: DC390_abort, \ - reset: DC390_reset, \ - bios_param: DC390_bios_param, \ - can_queue: 42, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 16, \ + .proc_dir = &DC390_proc_scsi_tmscsim, \ + .proc_info = DC390_proc_info, \ + .name = DC390_BANNER " V" DC390_VERSION, \ + .detect = DC390_detect, \ + .release = DC390_release, \ + .queuecommand = DC390_queue_command, \ + .abort = DC390_abort, \ + .reset = DC390_reset, \ + .bios_param = DC390_bios_param, \ + .can_queue = 42, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 16, \ NEW_EH \ - unchecked_isa_dma: 0, \ - use_clustering: DISABLE_CLUSTERING \ + .unchecked_isa_dma = 0, \ + .use_clustering = DISABLE_CLUSTERING \ }#endif #endif /* defined(HOSTS_C) || defined(MODULE) */
drivers/scsi/dec_esp.h renamed from drivers/scsi/dec_esp.h.old +14 -14
@@ -27,19 +27,19 @@ int hostno, int inout);#define SCSI_DEC_ESP { \ - proc_name: "esp", \ - proc_info: &esp_proc_info, \ - name: "NCR53C94", \ - detect: dec_esp_detect, \ - info: esp_info, \ - command: esp_command, \ - queuecommand: esp_queue, \ - abort: esp_abort, \ - reset: esp_reset, \ - can_queue: 7, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 1, \ - use_clustering: DISABLE_CLUSTERING, } + .proc_name = "esp", \ + .proc_info = &esp_proc_info, \ + .name = "NCR53C94", \ + .detect = dec_esp_detect, \ + .info = esp_info, \ + .command = esp_command, \ + .queuecommand = esp_queue, \ + .abort = esp_abort, \ + .reset = esp_reset, \ + .can_queue = 7, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 1, \ + .use_clustering = DISABLE_CLUSTERING, }#endif /* DEC_ESP_H */
drivers/scsi/dmx3191d.h renamed from drivers/scsi/dmx3191d.h.old +16 -16
@@ -32,22 +32,22 @@#define DMX3191D { \ - proc_info: dmx3191d_proc_info, \ - name: "Domex DMX3191D", \ - detect: dmx3191d_detect, \ - release: dmx3191d_release_resources, \ - info: dmx3191d_info, \ - queuecommand: dmx3191d_queue_command, \ - eh_abort_handler: dmx3191d_abort, \ - eh_bus_reset_handler: dmx3191d_bus_reset, \ - eh_device_reset_handler:dmx3191d_device_reset, \ - eh_host_reset_handler: dmx3191d_host_reset, \ - bios_param: NULL, \ - can_queue: 32, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 2, \ - use_clustering: DISABLE_CLUSTERING \ + .proc_info = dmx3191d_proc_info, \ + .name = "Domex DMX3191D", \ + .detect = dmx3191d_detect, \ + .release = dmx3191d_release_resources, \ + .info = dmx3191d_info, \ + .queuecommand = dmx3191d_queue_command, \ + .eh_abort_handler = dmx3191d_abort, \ + .eh_bus_reset_handler = dmx3191d_bus_reset, \ + .eh_device_reset_handler = dmx3191d_device_reset, \ + .eh_host_reset_handler = dmx3191d_host_reset, \ + .bios_param = NULL, \ + .can_queue = 32, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 2, \ + .use_clustering = DISABLE_CLUSTERING \ }
drivers/scsi/dpti.h renamed from drivers/scsi/dpti.h.old +33 -33
77 lines not on this page · raw message
drivers/scsi/dtc.h renamed from drivers/scsi/dtc.h.old +13 -13
@@ -54,19 +54,19 @@*/ #define DTC3x80 { \ - name: "DTC 3180/3280 ", \ - detect: dtc_detect, \ - queuecommand: dtc_queue_command, \ - eh_abort_handler: dtc_abort, \ - eh_bus_reset_handler: dtc_bus_reset, \ - eh_device_reset_handler: dtc_device_reset, \ - eh_host_reset_handler: dtc_host_reset, \ - bios_param: dtc_biosparam, \ - can_queue: CAN_QUEUE, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: CMD_PER_LUN , \ - use_clustering: DISABLE_CLUSTERING} + .name = "DTC 3180/3280 ", \ + .detect = dtc_detect, \ + .queuecommand = dtc_queue_command, \ + .eh_abort_handler = dtc_abort, \ + .eh_bus_reset_handler = dtc_bus_reset, \ + .eh_device_reset_handler = dtc_device_reset, \ + .eh_host_reset_handler = dtc_host_reset, \ + .bios_param = dtc_biosparam, \ + .can_queue = CAN_QUEUE, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = CMD_PER_LUN , \ + .use_clustering = DISABLE_CLUSTERING}#define NCR5380_implementation_fields \ unsigned int base
drivers/scsi/eata.h renamed from drivers/scsi/eata.h.old +13 -13
@@ -14,17 +14,17 @@#define EATA_VERSION "8.00.00"#define EATA { \ - name: "EATA/DMA 2.0x rev. " EATA_VERSION " ", \ - detect: eata2x_detect, \ - release: eata2x_release, \ - queuecommand: eata2x_queuecommand, \ - eh_abort_handler: eata2x_eh_abort, \ - eh_device_reset_handler: NULL, \ - eh_bus_reset_handler: NULL, \ - eh_host_reset_handler: eata2x_eh_host_reset, \ - bios_param: eata2x_bios_param, \ - slave_configure: eata2x_slave_configure, \ - this_id: 7, \ - unchecked_isa_dma: 1, \ - use_clustering: ENABLE_CLUSTERING \ + .name = "EATA/DMA 2.0x rev. " EATA_VERSION " ", \ + .detect = eata2x_detect, \ + .release = eata2x_release, \ + .queuecommand = eata2x_queuecommand, \ + .eh_abort_handler = eata2x_eh_abort, \ + .eh_device_reset_handler = NULL, \ + .eh_bus_reset_handler = NULL, \ + .eh_host_reset_handler = eata2x_eh_host_reset, \ + .bios_param = eata2x_bios_param, \ + .slave_configure = eata2x_slave_configure, \ + .this_id = 7, \ + .unchecked_isa_dma = 1, \ + .use_clustering = ENABLE_CLUSTERING \ }
drivers/scsi/eata_dma.h renamed from drivers/scsi/eata_dma.h.old +9 -9
@@ -81,15 +81,15 @@#include <scsi/scsicam.h> #define EATA_DMA { \ - proc_info: eata_proc_info, /* procinfo */ \ - name: "EATA (Extended Attachment) HBA driver", \ - detect: eata_detect, \ - release: eata_release, \ - queuecommand: eata_queue, \ - abort: eata_abort, \ - reset: eata_reset, \ - unchecked_isa_dma: 1,/* True if ISA */ \ - use_clustering: ENABLE_CLUSTERING } + .proc_info = eata_proc_info, /* procinfo */ \ + .name = "EATA (Extended Attachment) HBA driver", \ + .detect = eata_detect, \ + .release = eata_release, \ + .queuecommand = eata_queue, \ + .abort = eata_abort, \ + .reset = eata_reset, \ + .unchecked_isa_dma = 1, /* True if ISA */ \ + .use_clustering = ENABLE_CLUSTERING }#endif /* _EATA_DMA_H */
drivers/scsi/eata_pio.h renamed from drivers/scsi/eata_pio.h.old +8 -8
@@ -65,14 +65,14 @@static int eata_pio_release (struct Scsi_Host *); #define EATA_PIO { \ - proc_info: eata_pio_proc_info, /* procinfo */ \ - name: "EATA (Extended Attachment) PIO driver",\ - detect: eata_pio_detect, \ - release: eata_pio_release, \ - queuecommand: eata_pio_queue, \ - eh_abort_handler: eata_pio_abort, \ - eh_host_reset_handler: eata_pio_host_reset, \ - use_clustering: ENABLE_CLUSTERING \ + .proc_info = eata_pio_proc_info, /* procinfo */ \ + .name = "EATA (Extended Attachment) PIO driver",\ + .detect = eata_pio_detect, \ + .release = eata_pio_release, \ + .queuecommand = eata_pio_queue, \ + .eh_abort_handler = eata_pio_abort, \ + .eh_host_reset_handler = eata_pio_host_reset, \ + .use_clustering = ENABLE_CLUSTERING \ }#endif /* _EATA_PIO_H */
drivers/scsi/fastlane.h renamed from drivers/scsi/fastlane.h.old +13 -13
@@ -48,18 +48,18 @@extern int esp_proc_info (char *buffer,char **start,off_t offset,int length,int hostno,int inout); -#define SCSI_FASTLANE { proc_name: "esp-fastlane", \ - proc_info: esp_proc_info, \ - name: "Fastlane SCSI", \ - detect: fastlane_esp_detect, \ - release: fastlane_esp_release, \ - queuecommand: esp_queue, \ - abort: esp_abort, \ - reset: esp_reset, \ - can_queue: 7, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 1, \ - use_clustering: ENABLE_CLUSTERING } +#define SCSI_FASTLANE { .proc_name = "esp-fastlane", \ + .proc_info = esp_proc_info, \ + .name = "Fastlane SCSI", \ + .detect = fastlane_esp_detect, \ + .release = fastlane_esp_release, \ + .queuecommand = esp_queue, \ + .abort = esp_abort, \ + .reset = esp_reset, \ + .can_queue = 7, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 1, \ + .use_clustering = ENABLE_CLUSTERING }#endif /* FASTLANE_H */
drivers/scsi/fcal.h renamed from drivers/scsi/fcal.h.old +15 -15
@@ -26,21 +26,21 @@int fcal_slave_configure (Scsi_Device *);#define FCAL { \ - name: "Fibre Channel Arbitrated Loop",\ - detect: fcal_detect, \ - release: fcal_release, \ - proc_info: fcal_proc_info, \ - queuecommand: fcp_scsi_queuecommand, \ - slave_configure: fcal_slave_configure, \ - can_queue: FCAL_CAN_QUEUE, \ - this_id: -1, \ - sg_tablesize: 1, \ - cmd_per_lun: 1, \ - use_clustering: ENABLE_CLUSTERING, \ - eh_abort_handler: fcp_scsi_abort, \ - eh_device_reset_handler:fcp_scsi_dev_reset, \ - eh_bus_reset_handler: fcp_scsi_bus_reset, \ - eh_host_reset_handler: fcp_scsi_host_reset, \ + .name = "Fibre Channel Arbitrated Loop",\ + .detect = fcal_detect, \ + .release = fcal_release, \ + .proc_info = fcal_proc_info, \ + .queuecommand = fcp_scsi_queuecommand, \ + .slave_configure = fcal_slave_configure, \ + .can_queue = FCAL_CAN_QUEUE, \ + .this_id = -1, \ + .sg_tablesize = 1, \ + .cmd_per_lun = 1, \ + .use_clustering = ENABLE_CLUSTERING, \ + .eh_abort_handler = fcp_scsi_abort, \ + .eh_device_reset_handler = fcp_scsi_dev_reset, \ + .eh_bus_reset_handler = fcp_scsi_bus_reset, \ + .eh_host_reset_handler = fcp_scsi_host_reset, \ }#endif /* !(_FCAL_H) */
drivers/scsi/fd_mcs.h renamed from drivers/scsi/fd_mcs.h.old +17 -17
@@ -36,23 +36,23 @@static const char *fd_mcs_info (struct Scsi_Host *);#define FD_MCS {\ - proc_name: "fd_mcs", \ - proc_info: fd_mcs_proc_info, \ - detect: fd_mcs_detect, \ - release: fd_mcs_release, \ - info: fd_mcs_info, \ - command: fd_mcs_command, \ - queuecommand: fd_mcs_queue, \ - eh_abort_handler: fd_mcs_abort, \ - eh_bus_reset_handler: fd_mcs_bus_reset, \ - eh_host_reset_handler: fd_mcs_host_reset, \ - eh_device_reset_handler: fd_mcs_device_reset, \ - bios_param: fd_mcs_biosparam, \ - can_queue: 1, \ - this_id: 7, \ - sg_tablesize: 64, \ - cmd_per_lun: 1, \ - use_clustering: DISABLE_CLUSTERING \ + .proc_name = "fd_mcs", \ + .proc_info = fd_mcs_proc_info, \ + .detect = fd_mcs_detect, \ + .release = fd_mcs_release, \ + .info = fd_mcs_info, \ + .command = fd_mcs_command, \ + .queuecommand = fd_mcs_queue, \ + .eh_abort_handler = fd_mcs_abort, \ + .eh_bus_reset_handler = fd_mcs_bus_reset, \ + .eh_host_reset_handler = fd_mcs_host_reset, \ + .eh_device_reset_handler = fd_mcs_device_reset, \ + .bios_param = fd_mcs_biosparam, \ + .can_queue = 1, \ + .this_id = 7, \ + .sg_tablesize = 64, \ + .cmd_per_lun = 1, \ + .use_clustering = DISABLE_CLUSTERING \ }#endif /* _FD_MCS_H */
drivers/scsi/fdomain.h renamed from drivers/scsi/fdomain.h.old +16 -16
@@ -39,21 +39,21 @@ int length, int hostno, int inout );static int fdomain_16x0_release (struct Scsi_Host *shpnt); -#define FDOMAIN_16X0 { proc_info: fdomain_16x0_proc_info, \ - detect: fdomain_16x0_detect, \ - info: fdomain_16x0_info, \ - command: fdomain_16x0_command, \ - queuecommand: fdomain_16x0_queue, \ - eh_abort_handler: fdomain_16x0_abort, \ - eh_bus_reset_handler: fdomain_16x0_bus_reset, \ - eh_device_reset_handler: fdomain_16x0_device_reset, \ - eh_host_reset_handler: fdomain_16x0_host_reset, \ - bios_param: fdomain_16x0_biosparam, \ - release: fdomain_16x0_release, \ - can_queue: 1, \ - this_id: 6, \ - sg_tablesize: 64, \ - cmd_per_lun: 1, \ - use_clustering: DISABLE_CLUSTERING \ +#define FDOMAIN_16X0 { .proc_info = fdomain_16x0_proc_info, \ + .detect = fdomain_16x0_detect, \ + .info = fdomain_16x0_info, \ + .command = fdomain_16x0_command, \ + .queuecommand = fdomain_16x0_queue, \ + .eh_abort_handler = fdomain_16x0_abort, \ + .eh_bus_reset_handler = fdomain_16x0_bus_reset, \ + .eh_device_reset_handler = fdomain_16x0_device_reset, \ + .eh_host_reset_handler = fdomain_16x0_host_reset, \ + .bios_param = fdomain_16x0_biosparam, \ + .release = fdomain_16x0_release, \ + .can_queue = 1, \ + .this_id = 6, \ + .sg_tablesize = 64, \ + .cmd_per_lun = 1, \ + .use_clustering = DISABLE_CLUSTERING \ }#endif
drivers/scsi/g_NCR5380.h renamed from drivers/scsi/g_NCR5380.h.old +16 -16
@@ -66,22 +66,22 @@#endif #define GENERIC_NCR5380 { \ - proc_info: generic_NCR5380_proc_info, \ - name: "Generic NCR5380/NCR53C400 Scsi Driver", \ - detect: generic_NCR5380_detect, \ - release: generic_NCR5380_release_resources, \ - info: (void *)generic_NCR5380_info, \ - queuecommand: generic_NCR5380_queue_command, \ - eh_abort_handler:generic_NCR5380_abort, \ - eh_bus_reset_handler:generic_NCR5380_bus_reset, \ - eh_device_reset_handler:generic_NCR5380_device_reset, \ - eh_host_reset_handler:generic_NCR5380_host_reset, \ - bios_param: NCR5380_BIOSPARAM, \ - can_queue: CAN_QUEUE, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: CMD_PER_LUN , \ - use_clustering: DISABLE_CLUSTERING} + .proc_info = generic_NCR5380_proc_info, \ + .name = "Generic NCR5380/NCR53C400 Scsi Driver", \ + .detect = generic_NCR5380_detect, \ + .release = generic_NCR5380_release_resources, \ + .info = (void *)generic_NCR5380_info, \ + .queuecommand = generic_NCR5380_queue_command, \ + .eh_abort_handler = generic_NCR5380_abort, \ + .eh_bus_reset_handler = generic_NCR5380_bus_reset, \ + .eh_device_reset_handler = generic_NCR5380_device_reset, \ + .eh_host_reset_handler = generic_NCR5380_host_reset, \ + .bios_param = NCR5380_BIOSPARAM, \ + .can_queue = CAN_QUEUE, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = CMD_PER_LUN , \ + .use_clustering = DISABLE_CLUSTERING}#ifndef HOSTS_C
drivers/scsi/gdth.h renamed from drivers/scsi/gdth.h.old +22 -22
50 lines not on this page · raw message
drivers/scsi/gvp11.h renamed from drivers/scsi/gvp11.h.old +12 -12
@@ -32,18 +32,18 @@#ifdef HOSTS_C -#define GVP11_SCSI { proc_name: "GVP11", \ - name: "GVP Series II SCSI", \ - detect: gvp11_detect, \ - release: gvp11_release, \ - queuecommand: wd33c93_queuecommand, \ - abort: wd33c93_abort, \ - reset: wd33c93_reset, \ - can_queue: CAN_QUEUE, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: CMD_PER_LUN, \ - use_clustering: DISABLE_CLUSTERING } +#define GVP11_SCSI { .proc_name = "GVP11", \ + .name = "GVP Series II SCSI", \ + .detect = gvp11_detect, \ + .release = gvp11_release, \ + .queuecommand = wd33c93_queuecommand, \ + .abort = wd33c93_abort, \ + .reset = wd33c93_reset, \ + .can_queue = CAN_QUEUE, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = CMD_PER_LUN, \ + .use_clustering = DISABLE_CLUSTERING }#else /*
drivers/scsi/ibmmca.h renamed from drivers/scsi/ibmmca.h.old +16 -16
@@ -27,22 +27,22 @@* about this, but it will break things in the future. */ #define IBMMCA { \ - proc_name: "ibmmca",/*proc_name*/ \ - proc_info: ibmmca_proc_info, /*proc info fn*/ \ - name: "IBM SCSI-Subsystem", /*name*/ \ - detect: ibmmca_detect, /*detect fn*/ \ - release: ibmmca_release, /*release fn*/ \ - command: ibmmca_command, /*command fn*/ \ - queuecommand: ibmmca_queuecommand, /*queuecommand fn*/ \ - eh_abort_handler:ibmmca_abort, /*abort fn*/ \ - eh_host_reset_handler:ibmmca_host_reset, /*reset fn*/ \ - bios_param: ibmmca_biosparam, /*bios fn*/ \ - can_queue: 16, /*can_queue*/ \ - this_id: 7, /*set by detect*/ \ - sg_tablesize: 16, /*sg_tablesize*/ \ - cmd_per_lun: 1, /*cmd_per_lun*/ \ - unchecked_isa_dma: 0, /*32-Bit Busmaster */ \ - use_clustering: ENABLE_CLUSTERING /*use_clustering*/ \ + .proc_name = "ibmmca", /*proc_name*/ \ + .proc_info = ibmmca_proc_info, /*proc info fn*/ \ + .name = "IBM SCSI-Subsystem", /*name*/ \ + .detect = ibmmca_detect, /*detect fn*/ \ + .release = ibmmca_release, /*release fn*/ \ + .command = ibmmca_command, /*command fn*/ \ + .queuecommand = ibmmca_queuecommand, /*queuecommand fn*/ \ + .eh_abort_handler = ibmmca_abort, /*abort fn*/ \ + .eh_host_reset_handler = ibmmca_host_reset, /*reset fn*/ \ + .bios_param = ibmmca_biosparam, /*bios fn*/ \ + .can_queue = 16, /*can_queue*/ \ + .this_id = 7, /*set by detect*/ \ + .sg_tablesize = 16, /*sg_tablesize*/ \ + .cmd_per_lun = 1, /*cmd_per_lun*/ \ + .unchecked_isa_dma = 0, /*32-Bit Busmaster */ \ + .use_clustering = ENABLE_CLUSTERING /*use_clustering*/ \ }#endif /* _IBMMCA_H */
drivers/scsi/imm.h renamed from drivers/scsi/imm.h.old +16 -16
@@ -163,21 +163,21 @@int imm_biosparam (struct scsi_device *,struct block_device *,sector_t ,int *); -#define IMM { proc_name: "imm", \ - proc_info: imm_proc_info, \ - name: "Iomega VPI2 (imm) interface",\ - detect: imm_detect, \ - release: imm_release, \ - command: imm_command, \ - queuecommand: imm_queuecommand, \ - eh_abort_handler: imm_abort, \ - eh_device_reset_handler: NULL, \ - eh_bus_reset_handler: imm_reset, \ - eh_host_reset_handler: imm_reset, \ - bios_param: imm_biosparam, \ - this_id: 7, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 1, \ - use_clustering: ENABLE_CLUSTERING \ +#define IMM { .proc_name = "imm", \ + .proc_info = imm_proc_info, \ + .name = "Iomega VPI2 (imm) interface",\ + .detect = imm_detect, \ + .release = imm_release, \ + .command = imm_command, \ + .queuecommand = imm_queuecommand, \ + .eh_abort_handler = imm_abort, \ + .eh_device_reset_handler = NULL, \ + .eh_bus_reset_handler = imm_reset, \ + .eh_host_reset_handler = imm_reset, \ + .bios_param = imm_biosparam, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 1, \ + .use_clustering = ENABLE_CLUSTERING \ }#endif /* _IMM_H */
drivers/scsi/in2000.h renamed from drivers/scsi/in2000.h.old +16 -16
@@ -414,22 +414,22 @@#define IN2000_CPL 2#define IN2000_HOST_ID 7 -#define IN2000 { proc_name: "in2000",/* name of /proc/scsi directory entry */ \ - proc_info: in2000_proc_info, /* pointer to proc info function */ \ - name: "Always IN2000", /* device name */ \ - detect: in2000_detect, /* returns number of in2000's found */ \ - release: in2000_release, /* release the in2000 controller */ \ - queuecommand: in2000_queuecommand, /* queue scsi command, don't wait */ \ - eh_abort_handler: in2000_abort, /* abort current command */ \ - eh_bus_reset_handler: in2000_bus_reset, /* reset scsi bus */ \ - eh_device_reset_handler: in2000_device_reset, /* reset scsi device */ \ - eh_host_reset_handler: in2000_host_reset, /* reset scsi hba */ \ - bios_param: in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \ - can_queue: IN2000_CAN_Q, /* max commands we can queue up */ \ - this_id: IN2000_HOST_ID, /* host-adapter scsi id */ \ - sg_tablesize: IN2000_SG, /* scatter-gather table size */ \ - cmd_per_lun: IN2000_CPL, /* commands per lun */ \ - use_clustering: DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \ +#define IN2000 { .proc_name = "in2000", /* name of /proc/scsi directory entry */ \ + .proc_info = in2000_proc_info, /* pointer to proc info function */ \ + .name = "Always IN2000", /* device name */ \ + .detect = in2000_detect, /* returns number of in2000's found */ \ + .release = in2000_release, /* release the in2000 controller */ \ + .queuecommand = in2000_queuecommand, /* queue scsi command, don't wait */ \ + .eh_abort_handler = in2000_abort, /* abort current command */ \ + .eh_bus_reset_handler = in2000_bus_reset, /* reset scsi bus */ \ + .eh_device_reset_handler = in2000_device_reset, /* reset scsi device */ \ + .eh_host_reset_handler = in2000_host_reset, /* reset scsi hba */ \ + .bios_param = in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \ + .can_queue = IN2000_CAN_Q, /* max commands we can queue up */ \ + .this_id = IN2000_HOST_ID, /* host-adapter scsi id */ \ + .sg_tablesize = IN2000_SG, /* scatter-gather table size */ \ + .cmd_per_lun = IN2000_CPL, /* commands per lun */ \ + .use_clustering = DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \ }#endif /* IN2000_H */
drivers/scsi/ini9100u.h renamed from drivers/scsi/ini9100u.h.old +25 -25
56 lines not on this page · raw message
drivers/scsi/inia100.h renamed from drivers/scsi/inia100.h.old +15 -15
@@ -85,21 +85,21 @@#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"#define INIA100 { \ - proc_name: "inia100", \ - name: inia100_REVID, \ - detect: inia100_detect, \ - release: inia100_release, \ - queuecommand: inia100_queue, \ - eh_abort_handler:inia100_abort, \ - eh_bus_reset_handler: inia100_bus_reset, \ - eh_device_reset_handler:inia100_device_reset, \ - can_queue: 1, \ - this_id: 1, \ - sg_tablesize: SG_ALL, \ - cmd_per_lun: 1, \ - present: 0, \ - unchecked_isa_dma: 0, \ - use_clustering: ENABLE_CLUSTERING, \ + .proc_name = "inia100", \ + .name = inia100_REVID, \ + .detect = inia100_detect, \ + .release = inia100_release, \ + .queuecommand = inia100_queue, \ + .eh_abort_handler = inia100_abort, \ + .eh_bus_reset_handler = inia100_bus_reset, \ + .eh_device_reset_handler = inia100_device_reset, \ + .can_queue = 1, \ + .this_id = 1, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = 1, \ + .present = 0, \ + .unchecked_isa_dma = 0, \ + .use_clustering = ENABLE_CLUSTERING, \ }#define ULONG unsigned long
drivers/scsi/ips.h renamed from drivers/scsi/ips.h.old +70 -70
150 lines not on this page · raw message
Signature · 3 lines
They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -- Benjamin Franklin, Historical Review of Pennsylvania, 1759