Skip to contentSkip to conversation

Problem with 2.4.21-pre1 Promise PDC20276

DISCUSSION bladi 1 participant 1 message Dec 14, 2002

lore
Share & tools
lore

bladi

author
#0 lore raw

Hi.

i have PDC20276 BIOS ver 2.20.1020.13 promise device

And with kernel 2.4.21-pre1 the kernel recognize correctly the promise card but not the IDE devices. With 2.4.20 it work correctly using the same .config file.

--------- 2.4.21-pre1 -----------------
PDC20276: IDE controller at PCI slot 00:0f.0
PDC20276: chipset revision 1
PDC20276: not 100% native mode: will probe irqs later
PDC20276: neither IDE port enabled (BIOS)

I try to load as kernel module too and pdc202xx_new.o give me the same error. /proc/ide/pdcnew
MBFastTrak 133 Lite Chipset.

---------- 2.4.20 -----------
PDC20276: IDE controller on PCI bus 00 dev 78
PDC20276: chipset revision 1
PDC20276: not 100% native mode: will probe irqs later
PDC20276: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode. ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:pio, hdf:pio

            ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio 

/proc/ide/pdc202xx
PROMISE Ultra series driver Ver 1.20.0.7 2002-05-23 Adapter: Ultra Series --------------- Primary Channel ---------------- Secondary Channel
------------- enabled enabled

66 Clocking     enabled                          enabled 
Mode            MASTER                           MASTER
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1
------DMA enabled:    no               no              yes               no 
UDMA Mode:      0                0               2                 0
PIO Mode:       0                0               4                 0

--
NovaSec Servicios de Seguridad
http://www.novasec.es

C\ Evaristo San Miguel 4 2º6 (Princesa)
28008 Madrid (España)

Tel: 91 547 30 51
Fax: 91 559 41 75