Skip to contentSkip to conversation

hi

U-Boot-Users zhouyangxzaq 2 participants 2 messages Feb 29, 2008

lore
Share & tools
lore
#0 lore raw

Hi ,
I have downloaded u-boot latest version 1.1.6 from the sourceforge.net I have installed cross compiler for arm.
my board and cross compiler :
board: sbc2410x
cross compiler: 2.95.3
cpu: arm920t
pc enviroment :red hat 9
u-boot: 1.1.6
1).i set the enviroment variable
#vi /etc/profile

    --------/usr/local/arm/2.95.3/bin

2).I am using following procedure to compile:*
make sbc2410x_config
make all

3).I am getting an error indicates that *"arm-linux-gcc: unrecognized option `-MQ'"*
the discrete information is the following :
~skip~
~skip~
*make[1]: Leaving directory `/home/hcac/u-boot-1.1.6/post/cpu' make -C cpu/arm920t start.o
make[1]: Entering directory `/home/hcac/u-boot-1.1.6/cpu/arm920t'
arm-linux-gcc: start.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: cpu.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: interrupts.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
make[1]: *** [.depend] Error 1
make[1]: Leaving directory `/home/hcac/u-boot-1.1.6/cpu/arm920t'
make: *** [cpu/arm920t/start.o] Error 2*
*
Thanks
zhouyang
-------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080229/ba14c35b/attachment.htm

#1 lore raw
Quoted 2 lines · In message <[email protected]>…

Hi ,

Please read http://catb.org/esr/faqs/smart-questions.html and chose a more descriptive subject next time. Thanks.

Quoted 1 line

I have downloaded u-boot latest version 1.1.6 from the sourceforge.net

This is not the latest version, it is ancient cruft. Please see
http://www.denx.de/wiki/UBoot/SourceCode

Quoted 3 lines

------=_Part_78494_28602099.1204263480108
Content-Type: text/html; charset=gbk
Content-Transfer-Encoding: quoted-printable

And never ever post HTML here!

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
f u cn rd ths, itn tyg h myxbl cd.