2.5.56: undefined reference to `_ebss' from drivers/mtd/maps/uclinux.c
Hi Greg,
trying to compile 2.5.56 with CONFIG_MTD_UCLINUX fails on i386 with
undefined reference to `_ebss'
at the final linking.
It seems _ebss is only defined on the architectures m68knommu and v850?
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedHi Adrian,
Quoted 5 lines · Adrian Bunk
trying to compile 2.5.56 with
CONFIG_MTD_UCLINUXfails on i386 with
undefined reference to `_ebss'
at the final linking.It seems
_ebssis only defined on the architectures m68knommu and v850?
Hmm, currently that is correct. There doesn't appear to be a "standard" symbol name applied to the immediate end of the bss section. Different architectures are using different names:
_ebss -- m68knommu, v850 __bss_stop -- i386, alpha, ppc, s390 __bss_end -- x86_64 _end -- mips, parisc, sparc, (actually most have this)
Actually it looks like _end is probably closer, it seems to almost always fall strait after the bss, on just about every architecture that has it.
Come to think of it _end is probably more appropriate anyway. Since that code is trying to find the location of something concatenated to the end of the kernel image.
Regards
Greg
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Wizard EMAIL: [email protected]
SnapGear Pty Ltd PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: www.SnapGear.com
Quoted 18 lines · Greg Ungerer
Hi Adrian,
Quoted 5 lines · Adrian Bunk
trying to compile 2.5.56 with
CONFIG_MTD_UCLINUXfails on i386 with
undefined reference to `_ebss'
at the final linking.It seems
_ebssis only defined on the architectures m68knommu and v850?Hmm, currently that is correct. There doesn't appear to be a "standard" symbol name applied to the immediate end of the bss section. Different architectures are using different names:
_ebss -- m68knommu, v850 __bss_stop -- i386, alpha, ppc, s390 __bss_end -- x86_64 _end -- mips, parisc, sparc, (actually most have this)
Quoted 7 lines
Actually it looks like
_endis probably closer, it seems to almost always fall strait after the bss, on just about every architecture that has it.Come to think of it
_endis probably more appropriate anyway. Since that code is trying to find the location of something concatenated to the end of the kernel image.
This problem (undefined reference to `_ebss') is still present in 2.5.65.
It might not be a solution for the whole issue, but is it intentionally that it's possible to enable CONFIG_MTD_UCLINUX on non-uClinux architectures or should an appropriate dependency be added to the Kconfig file?
Quoted 2 lines
Regards
Greg
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 5 lines · Adrian Bunk
...
It might not be a solution for the whole issue, but is it intentionally that it's possible to enableCONFIG_MTD_UCLINUXon non-uClinux architectures or should an appropriate dependency be added to theKconfigfile?
The following patch should do what I was thinking of:
drivers/mtd/maps/Kconfig renamed from drivers/mtd/maps/Kconfig.old +1 -1
@@ -348,7 +348,7 @@ config MTD_UCLINUX tristate "Generic uClinux RAM/ROM filesystem support" - depends on MTD_PARTITIONS + depends on MTD_PARTITIONS && !MMU help Map driver to support image based filesystems for uClinux.
Any comments on whether this is correct?
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedHi Adrian,
This seems reasonable to me. It is after all targeted at uclinux. I suspect noone with VM setups would be much interrested in using it anyway.
Patch looks good to me.
Regards
Greg
Quoted 28 lines · Adrian Bunk
Quoted 3 lines · Adrian Bunk
...
It might not be a solution for the whole issue, but is it intentionally
that it's possible to enableCONFIG_MTD_UCLINUXon non-uClinux architectures or should an appropriate dependency be added to theKconfigfile?The following patch should do what I was thinking of:
drivers/mtd/maps/Kconfig renamed from drivers/mtd/maps/Kconfig.old +1
-1@@ -348,7 +348,7 @@ config MTD_UCLINUX tristate "Generic uClinux RAM/ROM filesystem support" - depends on MTD_PARTITIONS + depends on MTD_PARTITIONS && !MMU help Map driver to support image based filesystems for uClinux.Any comments on whether this is correct?
cu
Adrian
Signature · 5 lines
------------------------------------------------------------------------ Greg Ungerer -- Chief Software Wizard EMAIL: [email protected] SnapGear Pty Ltd PHONE: +61 7 3435 2888 825 Stanley St, FAX: +61 7 3891 3630 Woolloongabba, QLD, 4102, Australia WEB: www.SnapGear.com