Skip to contentSkip to conversation

radeonfb almost there.. but not quite! :)

DISCUSSION Arnd Bergmann 3 participants 6 messages Jan 16, 2003 – Jan 18, 2003 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 8 lines · Alessandro Suardi

Radeonfb works better for me in 2.5.58, same card but on a
Dell Latitude C640 - 1024x768 though, and xclk=16600.

I say "better" and not simply "works" because

- the gpm cursor positioned on characters shows different ones (eg. hovering on a 'd' it shows a highlighted 'B')

This works for me.

Quoted 2 lines

- the pre-penguin display is garbage. The console though gets to recover right after the penguin display

Same here. I see the same garbage when switching resolutions with fbset.

I also have a small problem when switching to and from X. Most of the time everything is fine, but sometimes it is unreadable and I have to switch back and forth again.

This is on an IBM Thinkpad A30p with 1600x1200 local display. radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=16600 from BIOS
radeonfb: probed DDR SGRAM 32768k videoram
radeon_get_moninfo: bios 4 scratch = 1000004
radeonfb: panel ID string: 1600x1200
radeonfb: detected DFP panel size from BIOS: 1600x1200
radeonfb: ATI Radeon M6 LY DDR SGRAM 32 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected radeonfb_pci_register END

#3 lore raw
Quoted 4 lines · Arnd Bergmann

I also have a small problem when switching to and from X. Most of the time everything is fine, but sometimes it is unreadable and I have to switch back and forth again.

Quoted 11 lines

This is on an IBM Thinkpad A30p with 1600x1200 local display. radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=16600 from BIOS
radeonfb: probed DDR SGRAM 32768k videoram
radeon_get_moninfo: bios 4 scratch = 1000004
radeonfb: panel ID string: 1600x1200
radeonfb: detected DFP panel size from BIOS: 1600x1200
radeonfb: ATI Radeon M6 LY DDR SGRAM 32 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected radeonfb_pci_register END

Do you have CONFIG_DRM=y ?

I'd _really_ like to have some feedback from James Simmons on this.

	../Paulo
#4 lore raw
Quoted 1 line · Paulo Andre

Do you have CONFIG_DRM=y ?

Yes:
[drm] AGP 0.99 on Unknown @ 0xd0000000 256MB [drm] Initialized radeon 1.6.0 20020828 on minor 0

	Arnd <><
#5 lore raw

Could you disable it and see if everything works then.

Quoted 15 lines · Paulo Andre
Quoted 2 lines

Do you have CONFIG_DRM=y ?

Yes:
[drm] AGP 0.99 on Unknown @ 0xd0000000 256MB [drm] Initialized radeon 1.6.0 20020828 on minor 0

	Arnd <><

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#6 lore raw
In reply to Paulo Andre'
Quoted 13 lines
Quoted 12 lines

This is on an IBM Thinkpad A30p with 1600x1200 local display. radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=16600 from BIOS
radeonfb: probed DDR SGRAM 32768k videoram
radeon_get_moninfo: bios 4 scratch = 1000004
radeonfb: panel ID string: 1600x1200
radeonfb: detected DFP panel size from BIOS: 1600x1200
radeonfb: ATI Radeon M6 LY DDR SGRAM 32 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected radeonfb_pci_register END

Quoted 3 lines

Do you have CONFIG_DRM=y ?

I'd _really_ like to have some feedback from James Simmons on this.

I'm here. I see the radeon fbdev driver is detected and it works :-) The issue is a X conflict. Does disabling CONFIG_DRM work?

#7 lore raw
Quoted 12 lines · James Simmons
Quoted 12 lines

This is on an IBM Thinkpad A30p with 1600x1200 local display.

Quoted 10 lines

radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=16600 from BIOS
radeonfb: probed DDR SGRAM 32768k videoram
radeon_get_moninfo: bios 4 scratch = 1000004
radeonfb: panel ID string: 1600x1200
radeonfb: detected DFP panel size from BIOS: 1600x1200
radeonfb: ATI Radeon M6 LY DDR SGRAM 32 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected radeonfb_pci_register END

Quoted 7 lines
Quoted 3 lines

Do you have CONFIG_DRM=y ?

I'd _really_ like to have some feedback from James Simmons on this.

I'm here. I see the radeon fbdev driver is detected and it works :-) The issue is a X conflict. Does disabling CONFIG_DRM work?

Doesn't solve my problem. To tell you the truth I already use CONFIG_DRM=n for a while now considering it keeps me from switching from console to X (either in 2.4 or 2.5). It just locks hard if I do so.

Anyway, it can't be an X conflict, as far as I'm concerned because the problems happen on the framebuffer console, not X related. Please refer to my first email, which I sent to you directly and to this list, for details.

And thanks for your reply.

	../Paulo