(1/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58
PATCH 1/1 (1/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58
Hello Linus,
These 3 patches provide support for the Pseudo ISA adapter (i2c-isa),
the VIA 686A Integrated Hardware Monitor (via686a) and Winbond W8378x series (w83781d) sensors.
Both sensors depend on i2c-isa.
The added files are modified versions of the ones found in the lm_sensors-2.7.0 package and were ported by me with help from Christoph Hellwig to the new driver model.
This patch (1/3) adds /drivers/i2c/busses/i2c-isa.c and adds it to Kconfig and Makefile in the same dir.
Please apply.
Thanks,
GertJan
drivers/i2c/busses/Kconfig +14 -0
@@ -39,5 +39,19 @@ in the lm_sensors package, which you can download at http://www.lm-sensors.nu +config I2C_ISA + tristate " Pseudo ISA adapter (for some hardware sensors)" + depends on I2C && ISA + help + This provide support for accessing some hardware sensors chips over + the ISA bus rather than the I2C or SMBus. If you want to do this, + say yes here. + + This can also be built as a module which can be inserted and removed + while the kernel is running. If you want to compile it as a module, + say M here and read <file:Documentation/modules.txt>. + + The module will be called i2c-isa.ko. + endmenu
drivers/i2c/busses/Makefile +1 -0
@@ -4,3 +4,4 @@ obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o +obj-$(CONFIG_I2C_ISA) += i2c-isa.o
drivers/i2c/busses/i2c-isa.c +61 -0
61 lines not on this page · raw message