Skip to contentSkip to conversation

DISCUSSION saurabh khanna 2 participants 2 messages Jan 31, 2003 – Feb 3, 2003

lore
Share & tools
lore
#0 lore raw

Problem: My xwindows did not open and my sound card don't work.

Xwindows:
I am a novice. I am using redhat linux 8. It detects my graphics card correctly but when i tried to open xwindows, my system hangs.

Sound:
Linux has detected my sound card once but not configured it and after that nor it is working nither it is detected by my linux.

GRUB:
Also, i can boot my linux through LILO only. GRUB wont work, it gives error "Not enough memory".

I have re-installed linux on my computer but the problem remains. All other detailes are follows.

Kernel version:
Linux version 2.4.18-14 ([email protected]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002

Commond which triggers the problem:
startx

Processor information:
processor : 0

vendor_id : AuthenticAMD

cpu family : 6

model : 6

model name : AMD Athlon(TM) XP 1700+

stepping : 2

cpu MHz : 1469.861

cache size : 256 KB

fdiv_bug : no

hlt_bug : no

f00f_bug : no

coma_bug : no

fpu : yes

fpu_exception : yes

cpuid level : 1

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow

bogomips : 2920.57

Module information:
nls_iso8859-1 3516 1 (autoclean)

nls_cp437 5116 1 (autoclean)

vfat 13084 1 (autoclean)

fat 38744 0 (autoclean)
[vfat]
autofs 13348 0 (autoclean) (unused)

ipt_REJECT 3736 2 (autoclean)

iptable_filter 2412 1 (autoclean)

ip_tables 14840 2 [ipt_REJECT iptable_filter]

mousedev 5524 0 (unused)

keybdev 2976 0 (unused)

hid 22244 0 (unused)

input 5888 0 [mousedev keybdev hid]

usb-ohci 21288 0 (unused)

usbcore 77056 1 [hid usb-ohci]

ext3 70400 1

jbd 52212 1 [ext3]

Loaded driver and hardware information:
0000-001f : dma
1
0020-003f : pic
1
0040-005f : timer

0060-006f : keyboard

0070-007f : rtc

0080-008f : dma page reg

00a0-00bf : pic
2
00c0-00df : dma
2
00f0-00ff : fpu

01f0-01f7 : ide
0
02f8-02ff : serial(auto)

03c0-03df : vga+

03f6-03f6 : ide
0
03f8-03ff : serial(auto)

0cf8-0cff : PCI conf
1
5000-500f : PCI device 10de:01b4 (nVidia Corporation)

5100-511f : PCI device 10de:01b4 (nVidia Corporation)

5500-550f : PCI device 10de:01b4 (nVidia Corporation)

a800-a80f : nVidia Corporation nForce IDE

a800-a807 : ide0

a808-a80f : ide1

b000-bfff : PCI Bus #01

b800-b807 : Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem

d800-d807 : PCI device 10de:01c3 (nVidia Corporation)

e000-e07f : PCI device 10de:01b1 (nVidia Corporation)

e100-e1ff : PCI device 10de:01b1 (nVidia Corporation)

00000000-0007ffff : System RAM

0009fc00-0009ffff : reserved

000a0000-000bffff : Video RAM area

000c0000-000c7fff : Video ROM

000f0000-000fffff : System ROM

00100000-06febfff : System RAM

00100000-00247f2e : Kernel code

00247f2f-0033ed03 : Kernel data

06fec000-06feefff : ACPI Tables

06fef000-06ffefff : reserved

06fff000-06ffffff : ACPI Non-volatile Storage

eb000000-ec7fffff : PCI Bus #02

eb000000-ebffffff : nVidia Corporation GeForce2 Integrated GPU

ec800000-ecffffff : PCI Bus #01

ec800000-ec80ffff : Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem

ed000000-ed000fff : PCI device 10de:01b1 (nVidia Corporation)

ed800000-ed87ffff : PCI device 10de:01b0 (nVidia Corporation)

ee000000-ee0003ff : PCI device 10de:01c3 (nVidia Corporation)

ee800000-ee800fff : PCI device 10de:01c2 (nVidia Corporation)

ee800000-ee800fff : usb-ohci
e
f000000-ef000fff : PCI device
10de:01c2 (nVidia Corporation)

ef000000-ef000fff : usb-ohci
e
ff00000-f7ffffff : PCI Bus #02

f0000000-f7ffffff : nVidia Corporation GeForce2 Integrated GPU

f8000000-fbffffff : PCI device
10de:01a4 (nVidia Corporation)

fec00000-fec00fff : reserved

fee00000-fee00fff : reserved

ffff0000-ffffffff : reserved

PCI information:
00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev b2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [40] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1
	Capabilities: [60] #08 [2001]

00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:00.3 RAM memory: nVidia Corporation: Unknown device 01aa (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0
	Capabilities: [50] #08 [01e1]

00:01.1 SMBus: nVidia Corporation nForce PCI System Management (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 5000 [size=16]
	Region 1: I/O ports at 5500 [size=16]
	Region 2: I/O ports at 5100 [size=32]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 

PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation: Unknown device 01c2 (rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ef000000 (32-bit, non-prefetchable) 

[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:03.0 USB Controller: nVidia Corporation: Unknown device 01c2 (rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ee800000 (32-bit, non-prefetchable) 

[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: nVidia Corporation: Unknown device 01c3 (rev c2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ee000000 (32-bit, non-prefetchable) 

[size=1K]
Region 1: I/O ports at d800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:05.0 Multimedia audio controller: nVidia Corporation: Unknown device 01b0 (rev c2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (250ns min, 3000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ed800000 (32-bit, non-prefetchable) 

[size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2)
Subsystem: nVidia Corporation: Unknown device 8384
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at e100 [size=256]
	Region 1: I/O ports at e000 [size=128]
	Region 2: Memory at ed000000 (32-bit, non-prefetchable) 

[disabled] [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ec800000-ecffffff
Prefetchable memory behind bridge: f8000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3) (prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (750ns min, 250ns max)
	Region 4: I/O ports at a800 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 

PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge (rev b2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000a000-00009fff
Memory behind bridge: eb000000-ec7fffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

01:08.0 Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp
(w/Handset) Modem
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 64
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ec800000 (32-bit, non-prefetchable) 

[size=64K]
Region 1: I/O ports at b800 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

02:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 - nForce GPU] (rev b1) (prog-if 00 [VGA])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at eb000000 (32-bit, non-prefetchable) 
[size=16M]
	Region 1: Memory at f0000000 (32-bit, prefetchable) 

[size=128M]
Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x4
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

XF86Config:

# File generated by anaconda.

Section "ServerLayout"

        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"

InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the

# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of

# the X server to render fonts.
    FontPath   "unix/:7100"

EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the

# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc105"
	Option	"XkbLayout"	"us"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"

        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"

EndSection

Section "InputDevice"

	Identifier	"Mouse1"
	Driver		"mouse"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"IMPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"ZAxisMapping"		"4 5"

EndSection

Section "Monitor"

        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   30-55
        VertRefresh 50-120
        Option "dpms"

EndSection

Section "Device"

	# no known options
	Identifier   "NVIDIA GeForce 2 MX (generic)"
        Driver       "nv"
        VendorName   "NVIDIA GeForce 2 MX (generic)"
        BoardName     "NVIDIA GeForce 2 MX (generic)"

#BusID
EndSection

Section "Screen"

	Identifier   "Screen0"
        Device       "NVIDIA GeForce 2 MX (generic)"
        Monitor      "Monitor0"
	DefaultDepth	16

	Subsection "Display"
        	Depth       16
                Modes       "1024x768" "800x600" "640x480"
	EndSubsection

EndSection

Section "DRI"

	Mode 0666

EndSection

cmdline:
auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14 root=LABEL=/

dma:
4: cascade

intrrupts:
CPU0

  0:     337647          XT-PIC  timer
  1:       2694          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  usb-ohci, usb-ohci
  8:          1          XT-PIC  rtc
 12:         20          XT-PIC  PS/2 Mouse
 14:      27338          XT-PIC  ide0
NMI:          0
ERR:          2

partitions:
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq

3 0 39121488 hda 2567 4181 52107 22201 1417 1941 26952
45880 -2 329576 7788488

   3     1    5245191 hda1 9 43 104 109 0 0 0 0 0 109 109
   3     2          1 hda2 0 0 0 0 0 0 0 0 0 0 0
   3     5   10490413 hda5 9 43 104 95 0 0 0 0 0 95 95
   3     6   11695288 hda6 50 43 145 214 7 1 8 95 0 230 310
   3     7    8104761 hda7 9 43 104 132 0 0 0 0 0 132 132
   3     8    3277228 hda8 2475 3966 51498 21527 1410 1940 26944 

45785 0 22394 67314
3 9 305203 hda9 9 25 104 56 0 0 0 0 0 56 56

My e-mail addresses are: [email protected] and [email protected] My postel address: 80, Ahilya Nagar Ext. Annapurna Road, Indore, M.P., India. PIN 452009
please answer me soon.
Thanking you.
Saurabh Khanna.

#1 lore raw

Re: your mail

hiya,

unfortunately this list isn't for such problems and it would be better to contact your distribution or the various forums it has. try google.

/me wonders again why this list isn't called linux-kernel-dev@...

Alex

Quoted 641 lines · saurabh khanna

Problem: My xwindows did not open and my sound card don't work.

Xwindows:
I am a novice. I am using redhat linux 8. It detects my graphics card
correctly but when i tried to open xwindows, my system hangs.

Sound:
Linux has detected my sound card once but not configured it and after
that nor it is working nither it is detected by my linux.

GRUB:
Also, i can boot my linux through LILO only. GRUB wont work, it gives
error "Not enough memory".

I have re-installed linux on my computer but the problem remains.
All other detailes are follows.

Kernel version:
Linux version 2.4.18-14 ([email protected]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002

Commond which triggers the problem:
startx

Processor information:
processor : 0

vendor_id : AuthenticAMD

cpu family : 6

model : 6

model name : AMD Athlon(TM) XP 1700+

stepping : 2

cpu MHz : 1469.861

cache size : 256 KB

fdiv_bug : no

hlt_bug : no

f00f_bug : no

coma_bug : no

fpu : yes

fpu_exception : yes

cpuid level : 1

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow

bogomips : 2920.57

Module information:
nls_iso8859-1 3516 1 (autoclean)

nls_cp437 5116 1 (autoclean)

vfat 13084 1 (autoclean)

fat 38744 0 (autoclean)
[vfat]
autofs 13348 0 (autoclean) (unused)

ipt_REJECT 3736 2 (autoclean)

iptable_filter 2412 1 (autoclean)

ip_tables 14840 2 [ipt_REJECT iptable_filter]

mousedev 5524 0 (unused)

keybdev 2976 0 (unused)

hid 22244 0 (unused)

input 5888 0 [mousedev keybdev hid]

usb-ohci 21288 0 (unused)

usbcore 77056 1 [hid usb-ohci]

ext3 70400 1

jbd 52212 1 [ext3]

Loaded driver and hardware information:
0000-001f : dma
1
0020-003f : pic
1
0040-005f : timer

0060-006f : keyboard

0070-007f : rtc

0080-008f : dma page reg

00a0-00bf : pic
2
00c0-00df : dma
2
00f0-00ff : fpu

01f0-01f7 : ide
0
02f8-02ff : serial(auto)

03c0-03df : vga+

03f6-03f6 : ide
0
03f8-03ff : serial(auto)

0cf8-0cff : PCI conf
1
5000-500f : PCI device 10de:01b4 (nVidia Corporation)

5100-511f : PCI device 10de:01b4 (nVidia Corporation)

5500-550f : PCI device 10de:01b4 (nVidia Corporation)

a800-a80f : nVidia Corporation nForce IDE

a800-a807 : ide0

a808-a80f : ide1

b000-bfff : PCI Bus #01

b800-b807 : Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem

d800-d807 : PCI device 10de:01c3 (nVidia Corporation)

e000-e07f : PCI device 10de:01b1 (nVidia Corporation)

e100-e1ff : PCI device 10de:01b1 (nVidia Corporation)

00000000-0007ffff : System RAM

0009fc00-0009ffff : reserved

000a0000-000bffff : Video RAM area

000c0000-000c7fff : Video ROM

000f0000-000fffff : System ROM

00100000-06febfff : System RAM

00100000-00247f2e : Kernel code

00247f2f-0033ed03 : Kernel data

06fec000-06feefff : ACPI Tables

06fef000-06ffefff : reserved

06fff000-06ffffff : ACPI Non-volatile Storage

eb000000-ec7fffff : PCI Bus #02

eb000000-ebffffff : nVidia Corporation GeForce2 Integrated GPU

ec800000-ecffffff : PCI Bus #01

ec800000-ec80ffff : Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem

ed000000-ed000fff : PCI device 10de:01b1 (nVidia Corporation)

ed800000-ed87ffff : PCI device 10de:01b0 (nVidia Corporation)

ee000000-ee0003ff : PCI device 10de:01c3 (nVidia Corporation)

ee800000-ee800fff : PCI device 10de:01c2 (nVidia Corporation)

ee800000-ee800fff : usb-ohci
e
f000000-ef000fff : PCI device
10de:01c2 (nVidia Corporation)

ef000000-ef000fff : usb-ohci
e
ff00000-f7ffffff : PCI Bus #02

f0000000-f7ffffff : nVidia Corporation GeForce2 Integrated GPU

f8000000-fbffffff : PCI device
10de:01a4 (nVidia Corporation)

fec00000-fec00fff : reserved

fee00000-fee00fff : reserved

ffff0000-ffffffff : reserved

PCI information:
00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev b2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [40] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1
	Capabilities: [60] #08 [2001]

00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:00.3 RAM memory: nVidia Corporation: Unknown device 01aa (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0
	Capabilities: [50] #08 [01e1]

00:01.1 SMBus: nVidia Corporation nForce PCI System Management (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 5000 [size=16]
	Region 1: I/O ports at 5500 [size=16]
	Region 2: I/O ports at 5100 [size=32]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 

PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation: Unknown device 01c2 (rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ef000000 (32-bit, non-prefetchable) 

[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:03.0 USB Controller: nVidia Corporation: Unknown device 01c2 (rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ee800000 (32-bit, non-prefetchable) 

[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: nVidia Corporation: Unknown device 01c3 (rev c2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ee000000 (32-bit, non-prefetchable) 

[size=1K]
Region 1: I/O ports at d800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:05.0 Multimedia audio controller: nVidia Corporation: Unknown device 01b0 (rev c2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (250ns min, 3000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ed800000 (32-bit, non-prefetchable) 

[size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2)
Subsystem: nVidia Corporation: Unknown device 8384
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at e100 [size=256]
	Region 1: I/O ports at e000 [size=128]
	Region 2: Memory at ed000000 (32-bit, non-prefetchable) 

[disabled] [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ec800000-ecffffff Prefetchable memory behind bridge: f8000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3) (prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 0 (750ns min, 250ns max)
	Region 4: I/O ports at a800 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 

PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge (rev b2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000a000-00009fff
Memory behind bridge: eb000000-ec7fffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

01:08.0 Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp
(w/Handset) Modem
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 64
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ec800000 (32-bit, non-prefetchable) 

[size=64K]
Region 1: I/O ports at b800 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

02:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 - nForce GPU] (rev b1) (prog-if 00 [VGA])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at eb000000 (32-bit, non-prefetchable) 
[size=16M]
	Region 1: Memory at f0000000 (32-bit, prefetchable) 

[size=128M]
Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x4
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

XF86Config:

# File generated by anaconda.

Section "ServerLayout"

        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"

InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the

# file minus the extension (like ".txt" or ".db").  There is 
normally
# no need to change the default.
    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of

# the X server to render fonts.
    FontPath   "unix/:7100"

EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment 
the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the

# lines below (which are the defaults).  For example, for a 
non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc105"
	Option	"XkbLayout"	"us"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"

        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"

EndSection

Section "InputDevice"

	Identifier	"Mouse1"
	Driver		"mouse"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"IMPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"ZAxisMapping"		"4 5"

EndSection

Section "Monitor"

        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   30-55
        VertRefresh 50-120
        Option "dpms"

EndSection

Section "Device"

	# no known options
	Identifier   "NVIDIA GeForce 2 MX (generic)"
        Driver       "nv"
        VendorName   "NVIDIA GeForce 2 MX (generic)"
        BoardName     "NVIDIA GeForce 2 MX (generic)"

#BusID
EndSection

Section "Screen"

	Identifier   "Screen0"
        Device       "NVIDIA GeForce 2 MX (generic)"
        Monitor      "Monitor0"
	DefaultDepth	16

	Subsection "Display"
        	Depth       16
                Modes       "1024x768" "800x600" "640x480"
	EndSubsection

EndSection

Section "DRI"

	Mode 0666

EndSection

cmdline:
auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14 root=LABEL=/

dma:
4: cascade

intrrupts:
CPU0

  0:     337647          XT-PIC  timer
  1:       2694          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  usb-ohci, usb-ohci
  8:          1          XT-PIC  rtc
 12:         20          XT-PIC  PS/2 Mouse
 14:      27338          XT-PIC  ide0
NMI:          0
ERR:          2

partitions:
major minor #blocks name rio rmerge rsect ruse wio wmerge
wsect wuse running use aveq

   3     0   39121488 hda 2567 4181 52107 22201 1417 1941 26952 
45880 -2 329576 7788488
   3     1    5245191 hda1 9 43 104 109 0 0 0 0 0 109 109
   3     2          1 hda2 0 0 0 0 0 0 0 0 0 0 0
   3     5   10490413 hda5 9 43 104 95 0 0 0 0 0 95 95
   3     6   11695288 hda6 50 43 145 214 7 1 8 95 0 230 310
   3     7    8104761 hda7 9 43 104 132 0 0 0 0 0 132 132
   3     8    3277228 hda8 2475 3966 51498 21527 1410 1940 26944 

45785 0 22394 67314
3 9 305203 hda9 9 25 104 56 0 0 0 0 0 56 56

My e-mail addresses are: [email protected] and [email protected]
My postel address: 80, Ahilya Nagar Ext. Annapurna Road, Indore, M.P.,
India. PIN 452009
please answer me soon.
Thanking you.
Saurabh Khanna.

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

mvg,
Alex

Signature · 3 lines
"[...] Konqueror open source project. Weighing in at less than
            one tenth the size of another open source renderer"
Apple,  Jan 2003 (http://www.apple.com/safari/)