is usb working under 2.5.59?
Hello,
I used to use usb under 2.4 with my Digital Ixus V with s10sh. It worked just perfectly, now under 2.5.59, I don't even see the output of a recongnize in the syslogd.
I have also tried gphoto2, which doesn't find any camera...
I have a MSI Max2-BLR motherboard with USB 2.0 on it:
lspci -v, the kernel config I use, /proc/bus/usb/devices, lsmod and dmesg could be found under http://ulima.unil.ch/greg/linux/MAX2/
Should I provide some other info?
I could attach them if you prefer :-)
Should I change anything in my config?
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
Quoted 7 lines · Gregoire Favre
Hello,
I used to use usb under 2.4 with my Digital Ixus V with s10sh. It worked just perfectly, now under 2.5.59, I don't even see the output of a recongnize in the syslogd.
I have also tried gphoto2, which doesn't find any camera...
Check that you have ohci/uhci in addition to the ehci controller, I just spent an hour finding out why 1.x devices didn't work on my via board (thanks David :)...
Signature · 1 line
Jens Axboe
Quoted 11 lines · Jens Axboe
Quoted 7 lines
Hello,
I used to use usb under 2.4 with my Digital Ixus V with s10sh. It worked just perfectly, now under 2.5.59, I don't even see the output of a recongnize in the syslogd.
I have also tried gphoto2, which doesn't find any camera...
Check that you have ohci/uhci in addition to the ehci controller, I just spent an hour finding out why 1.x devices didn't work on my via board (thanks David :)...
Well, yes I have it...as I put in
http://ulima.unil.ch/greg/linux/MAX2/lsmod-2.5.59
ehci_hcd 17792 0 ohci_hcd 12672 0
Thank you very much, all suggestion are greatly appreciated ;-)
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]