Skip to contentSkip to conversation

klibc for 2.5.59 bk

RFC Greg KH 7 participants 19 messages Feb 7, 2003 – Feb 18, 2003

lore
Share & tools
lore

Greg KH

author
#0 lore raw

Hi all,

Thanks to Arnd Bergmann, it looks like the klibc and initramfs code is now working. I've created a patch against Linus's latest bk tree and put it at:

	http://www.kroah.com/linux/klibc/klibc-2.5.59-2.patch.gz
(I can't get to kernel.org right now, sorry)
and there's a bk tree at:
	bk://kernel.bkbits.net/gregkh/linux/klibc-2.5

I'd really like to send this to Linus now, but I'm going to be away from email for about a week, so I'll wait will I get back. If anyone has any issues with this patch, please let me know.

thanks,

greg k-h

#1 lore raw
Quoted 5 lines · Greg KH

Hi all,

Thanks to Arnd Bergmann, it looks like the klibc and initramfs code is now working. I've created a patch against Linus's latest bk tree and put it at:

Quoted 9 lines
	http://www.kroah.com/linux/klibc/klibc-2.5.59-2.patch.gz
(I can't get to kernel.org right now, sorry)
and there's a bk tree at:
	bk://kernel.bkbits.net/gregkh/linux/klibc-2.5

I'd really like to send this to Linus now, but I'm going to be away from email for about a week, so I'll wait will I get back. If anyone has any issues with this patch, please let me know.

That's good, that'll give me a chance to check through it.

What klibc is this based on?

-hpa

author
#2 lore raw
Quoted 11 lines · H. Peter Anvin
Quoted 10 lines · Greg KH

Hi all,

Thanks to Arnd Bergmann, it looks like the klibc and initramfs code is now working. I've created a patch against Linus's latest bk tree and put it at:

	http://www.kroah.com/linux/klibc/klibc-2.5.59-2.patch.gz
(I can't get to kernel.org right now, sorry)
and there's a bk tree at:
	bk://kernel.bkbits.net/gregkh/linux/klibc-2.5
Quoted 8 lines
Quoted 4 lines

I'd really like to send this to Linus now, but I'm going to be away from email for about a week, so I'll wait will I get back. If anyone has any issues with this patch, please let me know.

That's good, that'll give me a chance to check through it.

What klibc is this based on?

klibc-0.72
Ugh, I see you've now released a few versions since then :( I'll sync up to the latest version before sending the patch on to Linus, thanks for making me look.

thanks,

greg k-h

#3 lore raw
In reply to Greg KH

Greg KH, Fri, Feb 07, 2003 05:59:19 +0100:

Quoted 6 lines

Hi all,

Thanks to Arnd Bergmann, it looks like the klibc and initramfs code is now working. I've created a patch against Linus's latest bk tree and put it at:

	http://www.kroah.com/linux/klibc/klibc-2.5.59-2.patch.gz

was the following part of the patch intended? (hello_world?)

cpio_mknod("/dev/console", 0600, 0, 0, 'c', 5, 1); cpio_mkdir("/root", 0700, 0, 0);
+ cpio_mkdir("/sbin", 0700, 0, 0);
+ cpio_mkfile("usr/hello_world/hello", "/sbin/hotplug", 0700, 0, 0);
cpio_trailer();

exit(0);

author
#4 lore raw
Quoted 9 lines · Alex Riesen

Greg KH, Fri, Feb 07, 2003 05:59:19 +0100:

Quoted 6 lines

Hi all,

Thanks to Arnd Bergmann, it looks like the klibc and initramfs code is now working. I've created a patch against Linus's latest bk tree and put it at:

	http://www.kroah.com/linux/klibc/klibc-2.5.59-2.patch.gz

was the following part of the patch intended? (hello_world?)

Yes it was. It shows how to add a binary file to the initramfs image, and have it executed by the kernel during the early boot process.

The fact that the program didn't really do anything significant isn't important here.

thanks,

greg k-h

#5 lore raw
Quoted 8 lines · Greg KH
Quoted 8 lines

Greg KH, Fri, Feb 07, 2003 05:59:19 +0100:

Quoted 6 lines

Hi all,

Thanks to Arnd Bergmann, it looks like the klibc and initramfs code is now working. I've created a patch against Linus's latest bk tree and put it at:

	http://www.kroah.com/linux/klibc/klibc-2.5.59-2.patch.gz
Quoted 7 lines
Quoted 1 line

was the following part of the patch intended? (hello_world?)

Yes it was. It shows how to add a binary file to the initramfs image, and have it executed by the kernel during the early boot process.

The fact that the program didn't really do anything significant isn't important here.

I did some work on integrating klibc into kbuild now. I used your patch as guide line, though I started from scratch with klibc-0.77. The build should work fine (reminder: "make KBUILD_VERBOSE=0 ..." will give you much more readable output), but I probably broke some non-x86 architectures in the process.

To do something more useful than "hello world", I actually moved some part of finding / mounting the final root system into userspace, though only conditional on CONFIG_INITRAMFS.

My tree is at

Pull from http://linux-isdn.bkbits.net/linux-2.5.klibc

If people want a GNU patch, I can mail that privately, it was too large to attach it here.

--Kai

-----------------------------------------------------------------------------
[email protected], 2003-02-15 16:55:46-06:00, [email protected]
klibc: Merge klibc-0.77

That's just a cp -r klibc-0.77/klibc/* linux/usr/lib

----------------------------------------------------------------------------

 CAVEATS                                 |   51 
 MCONFIG                                 |   49 
 Makefile                                |  134 +
 README                                  |   57 
 SOCKETCALLS                             |   21 
 SYSCALLS                                |  146 +
 __shared_init.c                         |   56 
 __signal.c                              |   22 
 __static_init.c                         |   40 
 abort.c                                 |   19 
 alarm.c                                 |   29 
 arch/README                             |   67 
 arch/alpha/MCONFIG                      |   17 
 arch/alpha/Makefile.inc                 |   93 
 arch/alpha/README-gcc                   |   23 
 arch/alpha/crt0.S                       |   21 
 arch/alpha/divide.c                     |   57 
 arch/alpha/include/klibc/archsetjmp.h   |   24 
 arch/alpha/include/klibc/archsys.h      |   53 
 arch/alpha/include/machine/asm.h        |   44 
 arch/alpha/pipe.c                       |   28 
 arch/alpha/setjmp.S                     |   61 
 arch/arm/MCONFIG                        |   26 
 arch/arm/Makefile.inc                   |   31 
 arch/arm/crt0.S                         |   25 
 arch/arm/include/klibc/archsetjmp.h     |   14 
 arch/arm/include/klibc/archsys.h        |   12 
 arch/arm/setjmp-arm.S                   |   40 
 arch/arm/setjmp-thumb.S                 |   58 
 arch/cris/MCONFIG                       |   11 
 arch/cris/Makefile.inc                  |   10 
 arch/cris/include/klibc/archsys.h       |   12 
 arch/i386/MCONFIG                       |   24 
 arch/i386/Makefile.inc                  |   27 
 arch/i386/crt0.S                        |   33 
 arch/i386/exits.S                       |   45 
 arch/i386/include/klibc/archsetjmp.h    |   19 
 arch/i386/include/klibc/archsys.h       |   96 
 arch/i386/include/klibc/diverr.h        |   16 
 arch/i386/libgcc/__ashldi3.S            |   29 
 arch/i386/libgcc/__ashrdi3.S            |   29 
 arch/i386/libgcc/__lshrdi3.S            |   29 
 arch/i386/libgcc/__muldi3.S             |   34 
 arch/i386/libgcc/__negdi2.S             |   21 
 arch/i386/setjmp.S                      |   58 
 arch/i386/socketcall.S                  |   38 
 arch/ia64/MCONFIG                       |   11 
 arch/ia64/Makefile.inc                  |   10 
 arch/ia64/include/klibc/archsys.h       |   12 
 arch/m68k/MCONFIG                       |   11 
 arch/m68k/Makefile.inc                  |   10 
 arch/m68k/include/klibc/archsys.h       |   12 
 arch/mips/MCONFIG                       |   18 
 arch/mips/Makefile.inc                  |   24 
 arch/mips/crt0.S                        |   25 
 arch/mips/include/klibc/archsetjmp.h    |   39 
 arch/mips/include/klibc/archsys.h       |   12 
 arch/mips/include/machine/asm.h         |   11 
 arch/mips/include/sgidefs.h             |   20 
 arch/mips/pipe.S                        |   16 
 arch/mips/setjmp.S                      |   82 
 arch/mips/vfork.S                       |   19 
 arch/mips64/MCONFIG                     |   11 
 arch/mips64/Makefile.inc                |   10 
 arch/mips64/include/klibc/archsys.h     |   12 
 arch/parisc/MCONFIG                     |   11 
 arch/parisc/Makefile.inc                |   10 
 arch/parisc/include/klibc/archsys.h     |   12 
 arch/ppc/MCONFIG                        |   11 
 arch/ppc/Makefile.inc                   |   15 
 arch/ppc/crt0.S                         |   29 
 arch/ppc/include/klibc/archsetjmp.h     |   36 
 arch/ppc/include/klibc/archsys.h        |   55 
 arch/ppc/setjmp.S                       |   35 
 arch/ppc64/MCONFIG                      |   11 
 arch/ppc64/Makefile.inc                 |   10 
 arch/ppc64/crt0.S                       |   38 
 arch/ppc64/include/klibc/archsys.h      |   52 
 arch/s390/MCONFIG                       |   13 
 arch/s390/Makefile.inc                  |   16 
 arch/s390/crt0.S                        |   25 
 arch/s390/include/klibc/archsetjmp.h    |   15 
 arch/s390/include/klibc/archsys.h       |   41 
 arch/s390/setjmp.S                      |   32 
 arch/s390x/MCONFIG                      |   13 
 arch/s390x/Makefile.inc                 |   16 
 arch/s390x/crt0.S                       |   21 
 arch/s390x/include/klibc/archsetjmp.h   |   15 
 arch/s390x/include/klibc/archsys.h      |   41 
 arch/s390x/setjmp.S                     |   36 
 arch/sh/MCONFIG                         |   11 
 arch/sh/Makefile.inc                    |   10 
 arch/sh/include/klibc/archsys.h         |   12 
 arch/sparc/MCONFIG                      |   18 
 arch/sparc/Makefile.inc                 |   44 
 arch/sparc/crt0.S                       |    2 
 arch/sparc/crt0i.S                      |  100 
 arch/sparc/divrem.m4                    |  276 ++
 arch/sparc/include/klibc/archsetjmp.h   |   16 
 arch/sparc/include/klibc/archsys.h      |   65 
 arch/sparc/include/machine/asm.h        |  192 +
 arch/sparc/include/machine/frame.h      |  138 +
 arch/sparc/include/machine/trap.h       |  141 +
 arch/sparc/setjmp.S                     |   38 
 arch/sparc/smul.S                       |  160 +
 arch/sparc/umul.S                       |  193 +
 arch/sparc64/MCONFIG                    |   21 
 arch/sparc64/Makefile.inc               |   13 
 arch/sparc64/crt0.S                     |    2 
 arch/sparc64/include/klibc/archsetjmp.h |   16 
 arch/sparc64/include/klibc/archsys.h    |  157 +
 arch/sparc64/setjmp.S                   |   55 
 arch/x86_64/MCONFIG                     |   16 
 arch/x86_64/Makefile.inc                |   16 
 arch/x86_64/crt0.S                      |   22 
 arch/x86_64/exits.S                     |   35 
 arch/x86_64/include/klibc/archsetjmp.h  |   21 
 arch/x86_64/include/klibc/archsys.h     |   32 
 arch/x86_64/setjmp.S                    |   54 
 assert.c                                |   13 
 atexit.c                                |   10 
 atexit.h                                |   19 
 atoi.c                                  |    3 
 atol.c                                  |    3 
 atoll.c                                 |    3 
 atox.c                                  |   14 
 brk.c                                   |   24 
 bsd_signal.c                            |   11 
 calloc.c                                |   21 
 closelog.c                              |   18 
 creat.c                                 |   12 
 ctypes.c                                |  281 ++
 exec_l.c                                |   57 
 execl.c                                 |    8 
 execle.c                                |    8 
 execlp.c                                |    8 
 execlpe.c                               |    8 
 execv.c                                 |   13 
 execvp.c                                |   13 
 execvpe.c                               |   73 
 exitc.c                                 |   36 
 fdatasync.c                             |   15 
 fgetc.c                                 |   20 
 fgets.c                                 |   33 
 fopen.c                                 |   46 
 fork.c                                  |   29 
 fprintf.c                               |   19 
 fputc.c                                 |   14 
 fputs.c                                 |   15 
 fread.c                                 |   35 
 fread2.c                                |   13 
 fwrite.c                                |   35 
 fwrite2.c                               |   13 
 getcwd.c                                |   15 
 getdomainname.c                         |   25 
 getenv.c                                |   22 
 gethostname.c                           |   25 
 getopt.c                                |   74 
 getpriority.c                           |   25 
 globals.c                               |   10 
 include/alloca.h                        |   13 
 include/arpa/inet.h                     |   24 
 include/assert.h                        |   22 
 include/bits32/bitsize/limits.h         |   14 
 include/bits32/bitsize/stddef.h         |   18 
 include/bits32/bitsize/stdint.h         |   34 
 include/bits32/bitsize/stdintconst.h    |   18 
 include/bits32/bitsize/stdintlimits.h   |   22 
 include/bits64/bitsize/limits.h         |   14 
 include/bits64/bitsize/stddef.h         |   13 
 include/bits64/bitsize/stdint.h         |   36 
 include/bits64/bitsize/stdintconst.h    |   18 
 include/bits64/bitsize/stdintlimits.h   |   22 
 include/ctype.h                         |  117 
 include/dirent.h                        |   20 
 include/elf.h                           |   12 
 include/endian.h                        |   41 
 include/errno.h                         |    8 
 include/fcntl.h                         |   11 
 include/grp.h                           |   13 
 include/inttypes.h                      |  226 +
 include/klibc/compiler.h                |   61 
 include/klibc/diverr.h                  |   16 
 include/klibc/extern.h                  |   14 
 include/limits.h                        |   40 
 include/net/if.h                        |    1 
 include/net/if_arp.h                    |    1 
 include/net/if_ether.h                  |    1 
 include/net/if_packet.h                 |    1 
 include/netinet/in.h                    |   29 
 include/netinet/in6.h                   |   10 
 include/netinet/ip.h                    |   13 
 include/netinet/tcp.h                   |   11 
 include/netinet/udp.h                   |   19 
 include/poll.h                          |   16 
 include/sched.h                         |   23 
 include/setjmp.h                        |   43 
 include/signal.h                        |   72 
 include/stdarg.h                        |   14 
 include/stddef.h                        |   24 
 include/stdint.h                        |  113 
 include/stdio.h                         |  109 
 include/stdlib.h                        |   94 
 include/string.h                        |   37 
 include/sys/dirent.h                    |   13 
 include/sys/fsuid.h                     |   14 
 include/sys/ioctl.h                     |   14 
 include/sys/klog.h                      |   24 
 include/sys/mman.h                      |   21 
 include/sys/module.h                    |  158 +
 include/sys/mount.h                     |   55 
 include/sys/param.h                     |   11 
 include/sys/reboot.h                    |   25 
 include/sys/resource.h                  |   15 
 include/sys/select.h                    |   13 
 include/sys/socket.h                    |   50 
 include/sys/socketcalls.h               |   28 
 include/sys/stat.h                      |   23 
 include/sys/syscall.h                   |   15 
 include/sys/time.h                      |   16 
 include/sys/times.h                     |   14 
 include/sys/types.h                     |  126 
 include/sys/uio.h                       |   15 
 include/sys/utime.h                     |   10 
 include/sys/utsname.h                   |   23 
 include/sys/vfs.h                       |   14 
 include/sys/wait.h                      |   19 
 include/syslog.h                        |   53 
 include/termios.h                       |   86 
 include/time.h                          |   14 
 include/unistd.h                        |  106 
 include/utime.h                         |   15 
 inet/inet_addr.c                        |   14 
 inet/inet_aton.c                        |   23 
 inet/inet_ntoa.c                        |   19 
 inet/inet_ntop.c                        |   52 
 inet/inet_pton.c                        |   74 
 interp.S                                |   11 
 isatty.c                                |   21 
 libgcc/__divdi3.c                       |   29 
 libgcc/__divsi3.c                       |   29 
 libgcc/__moddi3.c                       |   29 
 libgcc/__modsi3.c                       |   29 
 libgcc/__udivdi3.c                      |   13 
 libgcc/__udivmoddi4.c                   |   32 
 libgcc/__udivmodsi4.c                   |   32 
 libgcc/__udivsi3.c                      |   13 
 libgcc/__umoddi3.c                      |   16 
 libgcc/__umodsi3.c                      |   16 
 llseek.c                                |   34 
 lrand48.c                               |   42 
 makeerrlist.pl                          |   80 
 malloc.c                                |  192 +
 malloc.h                                |   51 
 memccpy.c                               |   23 
 memchr.c                                |   18 
 memcmp.c                                |   19 
 memcpy.c                                |   29 
 memmem.c                                |   44 
 memmove.c                               |   34 
 memset.c                                |   30 
 memswap.c                               |   23 
 mmap.c                                  |   51 
 nice.c                                  |   22 
 onexit.c                                |   39 
 pause.c                                 |   21 
 perror.c                                |   12 
 printf.c                                |   19 
 pty.c                                   |   31 
 puts.c                                  |   13 
 qsort.c                                 |   42 
 raise.c                                 |   11 
 readdir.c                               |   66 
 realloc.c                               |   49 
 reboot.c                                |   15 
 recv.c                                  |   11 
 sbrk.c                                  |   23 
 seed48.c                                |   19 
 select.c                                |    9 
 send.c                                  |   11 
 setegid.c                               |   10 
 setenv.c                                |  124 
 seteuid.c                               |   10 
 setpgrp.c                               |   10 
 setresgid.c                             |   29 
 setresuid.c                             |   30 
 sha1hash.c                              |  317 ++
 sigaction.c                             |   19 
 siglist.c                               |  115 
 siglongjmp.c                            |   16 
 signal.c                                |   11 
 sigpending.c                            |   19 
 sigprocmask.c                           |   19 
 sigsuspend.c                            |   19 
 sleep.c                                 |   20 
 snprintf.c                              |   16 
 socketcalls.pl                          |   62 
 socketcommon.h                          |   25 
 sprintf.c                               |   18 
 srand48.c                               |   16 
 sscanf.c                                |   17 
 strcat.c                                |   11 
 strchr.c                                |   16 
 strcmp.c                                |   20 
 strcpy.c                                |   20 
 strdup.c                                |   17 
 strerror.c                              |   25 
 strlen.c                                |   14 
 strncat.c                               |   11 
 strncmp.c                               |   20 
 strncpy.c                               |   22 
 strntoimax.c                            |   13 
 strntoumax.c                            |   75 
 strrchr.c                               |   18 
 strsep.c                                |   21 
 strspn.c                                |   67 
 strstr.c                                |   10 
 strtoimax.c                             |    3 
 strtok.c                                |   16 
 strtol.c                                |    3 
 strtoll.c                               |    3 
 strtoul.c                               |    3 
 strtoull.c                              |    3 
 strtoumax.c                             |    3 
 strtox.c                                |   13 
 syscalls.pl                             |   72 
 syscommon.h                             |   29 
 syslog.c                                |   68 
 tests/getenvtest.c                      |   26 
 tests/getopttest.c                      |   31 
 tests/hello.c                           |    7 
 tests/idtest.c                          |   14 
 tests/malloctest.c                      | 4145 ++++++++++++++++++++++++++++++++
 tests/memstrtest.c                      |   29 
 tests/microhello.c                      |    9 
 tests/minihello.c                       |    7 
 tests/minips.c                          |  452 +++
 tests/nfs_no_rpc.c                      |  538 ++++
 tests/setjmptest.c                      |   36 
 tests/testrand48.c                      |   19 
 tests/testvsnp.c                        |  115 
 time.c                                  |   27 
 umount.c                                |   12 
 unsetenv.c                              |   40 
 usleep.c                                |   15 
 utime.c                                 |   30 
 vfprintf.c                              |   26 
 vprintf.c                               |   11 
 vsnprintf.c                             |  433 +++
 vsprintf.c                              |   11 
 vsscanf.c                               |  365 ++
 wait.c                                  |   12 
 wait3.c                                 |   12 
 waitpid.c                               |   12 
 354 files changed, 17793 insertions(+)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:09:41-06:00, [email protected]
kbuild/klibc: Integrate klibc into the build.

Basically, add a scripts/Makefile.user, which does similar things to scripts/Makefile.build, but compiles userspace for the target instead.

It's tested for a static klibc on i386, building the shared lib works, too, but is not further integrated.

This patch also adds gregkh's hello test program, which works as well.

----------------------------------------------------------------------------

 b/Makefile                           |   39 ++++++
 b/scripts/Makefile.build             |    6 -
 b/scripts/Makefile.clean             |   11 +
 b/scripts/Makefile.lib               |    3 
 b/scripts/Makefile.user              |  209 +++++++++++++++++++++++++++++++++++
 b/usr/Makefile                       |   28 ++++
 b/usr/lib/MCONFIG                    |   39 +++---
 b/usr/lib/Makefile                   |  159 +++++++++++++-------------
 b/usr/lib/socketcalls.pl             |   11 +
 b/usr/lib/socketcalls/socketcommon.h |   25 ++++
 b/usr/lib/syscalls.pl                |   12 +-
 b/usr/lib/syscalls/syscommon.h       |   29 ++++
 b/usr/root/Makefile                  |    3 
 b/usr/root/hello                     |binary
 b/usr/root/hello.c                   |    8 +
 usr/lib/socketcommon.h               |   25 ----
 usr/lib/syscommon.h                  |   29 ----
 17 files changed, 471 insertions(+), 165 deletions(-)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:11:51-06:00, [email protected]
klibc: fix up the hello_world example

stdout doesn't go anywhere useful when spawned from the kernel :)

----------------------------------------------------------------------------

 hello.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletion(-)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:16:53-06:00, [email protected]
klibc: Fix a compiler warning

----------------------------------------------------------------------------

 sha1hash.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:20:13-06:00, [email protected]
klibc: Fix the "hello" example (for real)

Greg's fix used fwrite on a file descriptor obtained from open(), which only works by luck, since for klibc FILE * == fd.

Use standard C lib functions for open/close.

----------------------------------------------------------------------------

 hello.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:21:47-06:00, [email protected]
klibc: add file support to gen_init_cpio.c

----------------------------------------------------------------------------

 gen_init_cpio.c |   90 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 90 insertions(+)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:24:10-06:00, [email protected]
klibc: gen_init_cpio file generation fix

I found what kept initramfs from working here: While creating of initramfs_data.cpio.gz, the padding between a file header and the file contents was wrong, which can be verified by unpacking the archive by hand.

----------------------------------------------------------------------------

 gen_init_cpio.c |    1 +
 1 files changed, 1 insertion(+)

-----------------------------------------------------------------------------
[email protected], 2003-02-15 23:33:21-06:00, [email protected]
klibc: Stop on error when building the CPIO

gen_init_cpio still referenced hello in usr/hello_world, but I put it into usr/root. This is now corrected, however it also pointed out the common problem that the error code of gen_init_cpio is ignored since it's output is piped to gzip. To fix that, make the generation of the .cpio.gz a two step process.

----------------------------------------------------------------------------

 Makefile        |   24 +++++++++++++++++-------
 gen_init_cpio.c |    2 +-
 2 files changed, 18 insertions(+), 8 deletions(-)

-----------------------------------------------------------------------------
[email protected], 2003-02-16 18:06:13-06:00, [email protected]
klibc: Silence too ambitious warnings

gcc complained about unused function parameters and things, that's just a little too much.

----------------------------------------------------------------------------

 Makefile |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

-----------------------------------------------------------------------------
[email protected], 2003-02-16 18:11:32-06:00, [email protected]
klibc: Move mounting of the root filesystem into userspace

When selecting CONFIG_INITRAMFS, init/do_mounts.c is not compiled anymore, and it's task is taken over by a small /sbin/init running in initramfs.

However, this is a proof of concept only, the userspace code only handles mounting a local filesystem, no support for nfs / initrd / devfs yet.

----------------------------------------------------------------------------

 init/Kconfig        |   10 +
 init/Makefile       |    7 
 init/do_mounts.c    |    6 
 init/main.c         |   22 ++
 scripts/Makefile    |    4 
 usr/Makefile        |    2 
 usr/gen_init_cpio.c |    2 
 usr/root/Makefile   |    5 
 usr/root/init.c     |  442 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 489 insertions(+), 11 deletions(-)
#6 lore raw
Quoted 1 line · Kai Germaschewski

I did some work on integrating klibc into kbuild now. I used your patch as guide line, though I started from scratch with klibc-0.77. The build should work fine (reminder: "make KBUILD_VERBOSE=0 ..." will give you much

woo hoo! Thanks much. I was sorta hoping you would step in and help out with the kbuild issues ;-)

Quoted 1 line

To do something more useful than "hello world", I actually moved some part of finding / mounting the final root system into userspace, though only conditional on CONFIG_INITRAMFS.

FWIW, this should be ok for testing, but not a merge... we need to have a single "do_mounts" code flow, not two code paths that are selected with a switch.

That's why I see a lot of little klibc binaries, especially initially. Moving piece-by-piece from do_mounts.c (and other places) to userspace takes longer, but really maximizes both stability and testing of new code.

Jeff

#7 lore raw
In reply to Kai Germaschewski
Quoted 5 lines · Kai Germaschewski

I did some work on integrating klibc into kbuild now. I used your patch as guide line, though I started from scratch with klibc-0.77. The build should work fine (reminder: "make KBUILD_VERBOSE=0 ..." will give you much more readable output), but I probably broke some non-x86 architectures in the process.

Got this output when compiling user programs:
USERCC usr/lib/snprintf.o
cc1: warning: -malign-loops is obsolete, use -falign-loops
cc1: warning: -malign-jumps is obsolete, use -falign-jumps
cc1: warning: -malign-functions is obsolete, use -falign-functions

$gcc -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.2/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --host=i386-redhat-linux --with-system-zlib --enable-__cxa_atexit Thread model: posix
gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)

It mostly look OK. I assume the duplication used for host-progs is momentary?

Sam

#8 lore raw
Quoted 8 lines · Kai Germaschewski
Quoted 6 lines

I did some work on integrating klibc into kbuild now. I used your patch as guide line, though I started from scratch with klibc-0.77. The build should work fine (reminder: "make KBUILD_VERBOSE=0 ..." will give you much more readable output), but I probably broke some non-x86 architectures in the process.

Quoted 6 lines

Got this output when compiling user programs:
USERCC usr/lib/snprintf.o
cc1: warning: -malign-loops is obsolete, use -falign-loops
cc1: warning: -malign-jumps is obsolete, use -falign-jumps
cc1: warning: -malign-functions is obsolete, use -falign-functions

I get the same error compiling the kernel proper for Crusoe. This is what I like to call an "annoyance warning" where maintaining compatibility between gcc versions emit a neverending stream of annoying messages.

-hpa

#9 lore raw
Quoted 17 lines · H. Peter Anvin
Quoted 9 lines · Kai Germaschewski
Quoted 7 lines

I did some work on integrating klibc into kbuild now. I used your patch as guide line, though I started from scratch with klibc-0.77. The build should work fine (reminder: "make KBUILD_VERBOSE=0 ..." will give you much more readable output), but I probably broke some non-x86 architectures in the process.

Quoted 6 lines

Got this output when compiling user programs:
USERCC usr/lib/snprintf.o
cc1: warning: -malign-loops is obsolete, use -falign-loops
cc1: warning: -malign-jumps is obsolete, use -falign-jumps
cc1: warning: -malign-functions is obsolete, use -falign-functions

Quoted 3 lines

I get the same error compiling the kernel proper for Crusoe. This is what I like to call an "annoyance warning" where maintaining compatibility between gcc versions emit a neverending stream of annoying messages.

Maintaining gcc compatibility need not imply this annoyance. This has been fixed in 2.5.x for ages, for the main kernel build, and I recently fixed it in 2.4.x by the attached patch. We just need to move that fix over to klibc build...

Jeff

arch/i386/Makefile +5 -2
diff -Nru a/arch/i386/Makefile b/arch/i386/Makefile
@@ -23,8 +23,10 @@
 
 CFLAGS += -pipe
 
+check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
+
 # prevent gcc from keeping the stack 16 byte aligned
-CFLAGS += $(shell if $(CC) -mpreferred-stack-boundary=2 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mpreferred-stack-boundary=2"; fi)
+CFLAGS += $(call check_gcc,-mpreferred-stack-boundary=2,)
 
 ifdef CONFIG_M386
 CFLAGS += -march=i386
@@ -83,7 +85,8 @@
 endif
 
 ifdef CONFIG_MCYRIXIII
-CFLAGS += -march=i486 -malign-functions=0 -malign-jumps=0 -malign-loops=0
+CFLAGS += $(call check_gcc,-march=c3,-march=i486)
+CFLAGS += $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 endif
 
 HEAD := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
#10 lore raw
Quoted 2 lines · Jeff Garzik

+check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)

Will check_gcc be compatible across architectures? If thats the case it should be moved to a common place.

Checking.....
The same type of trick is used for alpha and sparc* - so I will move it to the top-level makefile.

Sam

#11 lore raw
Quoted 7 lines · Sam Ravnborg
Quoted 2 lines · Jeff Garzik

+check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)

Will check_gcc be compatible across architectures?

s/will/is/ Yes.

Jeff

#12 lore raw
In reply to Jeff Garzik
Quoted 6 lines

Maintaining gcc compatibility need not imply this annoyance. This has been fixed in 2.5.x for ages, for the main kernel build, and I recently fixed it in 2.4.x by the attached patch. We just need to move that fix over to klibc build...

Of course it doesn't ... it's a matter of detecting if the -f options are usable. It was more of a complaint at the gcc team.

However, I can personally vouch for that it's *not* fixed for the main kernel build as of 2.5.61.

-hpa

#13 lore raw
Quoted 2 lines · H. Peter Anvin

However, I can personally vouch for that it's *not* fixed for the main kernel build as of 2.5.61.

Well, if I had a Transmeta-powered laptop or handheld, I'm sure that would be fixed too ;-)

Can you give the attached patch a quick once-over? It's obvious enough but I would rather the patch got tested nonetheless.

Jeff

# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas:
# ChangeSet 1.1051 -> 1.1052
# arch/i386/Makefile 1.44 -> 1.45
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/02/18 [email protected] 1.1052
# [ia32] fix Crusoe CFLAGS on newer gcc versions
# --------------------------------------------
#

arch/i386/Makefile +2 -1
diff -Nru a/arch/i386/Makefile b/arch/i386/Makefile
@@ -39,7 +39,8 @@
 cflags-$(CONFIG_MK6)		+= $(call check_gcc,-march=k6,-march=i586)
 cflags-$(CONFIG_MK7)		+= $(call check_gcc,-march=athlon,-march=i686 -malign-functions=4)
 cflags-$(CONFIG_MK8)		+= $(call check_gcc,-march=k8,$(call check_gcc,-march=athlon,-march=i686 -malign-functions=4))
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 -malign-functions=0 -malign-jumps=0 -malign-loops=0
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686
+cflags-$(CONFIG_MCRUSOE)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call check_gcc,-march=winchip-c6,-march=i586)
 cflags-$(CONFIG_MWINCHIP2)	+= $(call check_gcc,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= -march=i586
#14 lore raw
Quoted 10 lines · Jeff Garzik
Quoted 2 lines · H. Peter Anvin

However, I can personally vouch for that it's *not* fixed for the main kernel build as of 2.5.61.

Well, if I had a Transmeta-powered laptop or handheld, I'm sure that would be fixed too ;-)

Can you give the attached patch a quick once-over? It's obvious enough but I would rather the patch got tested nonetheless.

Tested, works ok.

Slighly different patch attached.

Linus, please apply.

Stelian.

===== arch/i386/Makefile 1.44 vs edited =====

arch/i386/Makefile +2 -1
@@ -39,12 +39,13 @@
 cflags-$(CONFIG_MK6)		+= $(call check_gcc,-march=k6,-march=i586)
 cflags-$(CONFIG_MK7)		+= $(call check_gcc,-march=athlon,-march=i686 -malign-functions=4)
 cflags-$(CONFIG_MK8)		+= $(call check_gcc,-march=k8,$(call check_gcc,-march=athlon,-march=i686 -malign-functions=4))
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 -malign-functions=0 -malign-jumps=0 -malign-loops=0
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call check_gcc,-march=winchip-c6,-march=i586)
 cflags-$(CONFIG_MWINCHIP2)	+= $(call check_gcc,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= -march=i586
 cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i486)
 # The alignment flags change with gcc 3.2
+cflags-$(CONFIG_MCRUSOE)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MVIAC3_2)	+= $(call check_gcc,-march=c3-2,-march=i686)
 
Signature · 2 lines
Stelian Pop <[email protected]>
Alcove - http://www.alcove.com
#15 lore raw
Quoted 10 lines · Stelian Pop
Quoted 10 lines
Quoted 2 lines · H. Peter Anvin

However, I can personally vouch for that it's *not* fixed for the main kernel build as of 2.5.61.

Well, if I had a Transmeta-powered laptop or handheld, I'm sure that would be fixed too ;-)

Can you give the attached patch a quick once-over? It's obvious enough but I would rather the patch got tested nonetheless.

This is required for 2.4 too. Rediffed and tested, Marcelo please apply.

Stelian.

===== arch/i386/Makefile 1.5 vs edited =====

arch/i386/Makefile +4 -3
@@ -61,15 +61,16 @@
 endif
 
 ifdef CONFIG_MK6
-CFLAGS += $(shell if $(CC) -march=k6 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-march=k6"; else echo "-march=i586"; fi)
+CFLAGS += $(call check_gcc,-march=k6,-march=i586)
 endif
 
 ifdef CONFIG_MK7
-CFLAGS += $(shell if $(CC) -march=athlon -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-march=athlon"; else echo "-march=i686 -malign-functions=4"; fi) 
+CFLAGS += $(call check_gcc,-march=athlon,-march=i686 -malign-functions=4)
 endif
 
 ifdef CONFIG_MCRUSOE
-CFLAGS += -march=i686 -malign-functions=0 -malign-jumps=0 -malign-loops=0
+CFLAGS += -march=i686
+CFLAGS += $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 endif
 
 ifdef CONFIG_MWINCHIPC6
Signature · 2 lines
Stelian Pop <[email protected]>
Alcove - http://www.alcove.com
#17 lore raw
In reply to Stelian Pop
Quoted 1 line · Stelian Pop

Tested, works ok.

thanks.

Quoted 3 lines

Slighly different patch attached.

Linus, please apply.

um, please don't...

Quoted 7 lines

===== arch/i386/Makefile 1.44 vs edited =====

arch/i386/Makefile +0 -0
@@ -39,12 +39,13 @@
 cflags-$(CONFIG_MK6)		+= $(call check_gcc,-march=k6,-march=i586)
 cflags-$(CONFIG_MK7)		+= $(call check_gcc,-march=athlon,-march=i686 -malign-functions=4)
 cflags-$(CONFIG_MK8)		+= $(call check_gcc,-march=k8,$(call check_gcc,-march=athlon,-march=i686 -malign-functions=4))

arch/i386/Makefile line 50

Quoted 10 lines
arch/i386/Makefile +2 -1
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 -malign-functions=0 -malign-jumps=0 -malign-loops=0
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call check_gcc,-march=winchip-c6,-march=i586)
 cflags-$(CONFIG_MWINCHIP2)	+= $(call check_gcc,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= -march=i586
 cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i486)
 # The alignment flags change with gcc 3.2
+cflags-$(CONFIG_MCRUSOE)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MVIAC3_2)	+= $(call check_gcc,-march=c3-2,-march=i686)

...because
(a) the Crusoe cflags are no longer together,
(b) Cyrix-3 cflags are suddenly bisected by Crusoe cflags, and
(c) you just dumped a crusoe-specific line in the middle of a bunch of Via/Cyrix CPU settings.

None of those choices makes sense. If you want to improve upon my patch, I would suggest consolidating the -f/-m check above the CPU cflags section, and then reference the calculated value, rather than wholly duplicating the calculation. The comment line "# The alignment flags [...]" is obviously not the start of a new alignment-flags section.

Jeff

#18 lore raw
Quoted 3 lines · Jeff Garzik
Quoted 1 line

Linus, please apply.

um, please don't...

[...]

Quoted 7 lines

...because
(a) the Crusoe cflags are no longer together,
(b) Cyrix-3 cflags are suddenly bisected by Crusoe cflags, and
(c) you just dumped a crusoe-specific line in the middle of a bunch of Via/Cyrix CPU settings.

Quoted 5 lines

None of those choices makes sense. If you want to improve upon my patch, I would suggest consolidating the -f/-m check above the CPU cflags section, and then reference the calculated value, rather than wholly duplicating the calculation. The comment line "# The alignment flags [...]" is obviously not the start of a new alignment-flags section.

Agreed, I was overzealous here...

Consolidating the -f/-m check above seems a bit overkill, especially since we don't want the same align options for all architectures.

Maybe removing the comment is the simplest improvement on your patch then. Not a big improvement however :)

Stelian.

===== arch/i386/Makefile 1.44 vs edited =====

arch/i386/Makefile +2 -2
@@ -39,12 +39,12 @@
 cflags-$(CONFIG_MK6)		+= $(call check_gcc,-march=k6,-march=i586)
 cflags-$(CONFIG_MK7)		+= $(call check_gcc,-march=athlon,-march=i686 -malign-functions=4)
 cflags-$(CONFIG_MK8)		+= $(call check_gcc,-march=k8,$(call check_gcc,-march=athlon,-march=i686 -malign-functions=4))
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 -malign-functions=0 -malign-jumps=0 -malign-loops=0
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686
+cflags-$(CONFIG_MCRUSOE)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call check_gcc,-march=winchip-c6,-march=i586)
 cflags-$(CONFIG_MWINCHIP2)	+= $(call check_gcc,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= -march=i586
 cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i486)
-# The alignment flags change with gcc 3.2
 cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,-malign-functions=0 -malign-jumps=0 -malign-loops=0)
 cflags-$(CONFIG_MVIAC3_2)	+= $(call check_gcc,-march=c3-2,-march=i686)
 
Signature · 2 lines
Stelian Pop <[email protected]>
Alcove - http://www.alcove.com