AGP backport from 2.5 to 2.4.21-pre4
Quoted 7 lines
GA-7VAXPUltra (KT400) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.
Chaintech 7AJA2E (KT133) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.Abit (i810) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.
From all this hardware only the KT400+R9000 pair possibly engage in AGP8x transfers,
and i`m suspicious whether R9000 does it at all...
So i think somebody testing it on real AGP3.0-capable hardware would do good...
regards, Samium Gromoff
Dana petak 21. februar 2003. 10:20, Samium Gromoff je napisao/la:
Quoted 4 lines
From all this hardware only the KT400+R9000 pair possibly engage in AGP8x
transfers, and i`m suspicious whether R9000 does it at all...
No, AGP4x max. As I said I did only a few tests, due to lack of hardware.
Quoted 4 lines
So i think somebody testing it on real AGP3.0-capable hardware would do
good...
That would be most apreciated. But I would like to see results for other
chipsets AGP8x, AGP4x deosn't mather.
Signature · 2 lines
Pozdrav, Tanasković Toplica
Quoted 5 lines · Samium Gromoff
Quoted 5 lines
GA-7VAXPUltra (KT400) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.
Chaintech 7AJA2E (KT133) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.
Quoted 7 lines
Quoted 2 lines
Abit (i810) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.From all this hardware only the KT400+R9000 pair possibly engage in AGP8x transfers,
and i`m suspicious whether R9000 does it at all...So i think somebody testing it on real AGP3.0-capable hardware would do good...
A big issue is that there is no AGP3.0 card currently supported by DRI. For an AGPx8 test, your only choice seems to be to hack the binary drivers provided by ATi etc to try and work with the newstyle gart.
Dave
Signature · 2 lines
| Dave Jones. http://www.codemonkey.org.uk | SuSE Labs
On my GA-7VAXP (KT400) with an AIW 9700 Pro Radeon the agpgart module would not load. It could not set the apeture size.
-Edward Killips.
Quoted 20 lines · Samium Gromoff
Quoted 7 lines
GA-7VAXPUltra (KT400) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.
Chaintech 7AJA2E (KT133) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.Abit (i810) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 = passed.From all this hardware only the KT400+R9000 pair possibly engage in AGP8x transfers,
and i`m suspicious whether R9000 does it at all...So i think somebody testing it on real AGP3.0-capable hardware would do good...
regards, Samium Gromoff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Edward Killips
On my GA-7VAXP (KT400) with an AIW 9700 Pro Radeon the agpgart module would not load. It could not set the apeture size.
Looks like the backport was based on too early a snapshot. The via-agp.c in 2.5.62 should work fine.
Dave
Signature · 2 lines
| Dave Jones. http://www.codemonkey.org.uk | SuSE Labs
Dana petak 21. februar 2003. 15:27, Edward Killips je napisao/la:
Quoted 6 lines
On my GA-7VAXP (KT400) with an AIW 9700 Pro Radeon the agpgart module would not load. It could not set the apeture size.
-Edward Killips.
I've send new patch, try it please and send me results.
Signature · 2 lines
Pozdrav, Tanasković Toplica
----- Original Message -----
From: "Samium Gromoff" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Friday, February 21, 2003 4:20 AM
Subject: Re: AGP backport from 2.5 to 2.4.21-pre4
Quoted 2 lines
Quoted 2 lines
GA-7VAXPUltra (KT400) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 =
passed.
Quoted 2 lines
Quoted 2 lines
Chaintech 7AJA2E (KT133) + ATI Radeon R9000 = passed.
+ GeForce 2MX400 =
passed.
Quoted 2 lines
Quoted 2 lines
Abit (i810) + ATI Radeon R9000 =
passed.
Quoted 1 line
Quoted 1 line
+ GeForce 2MX400 =
passed.
Quoted 2 lines
From all this hardware only the KT400+R9000 pair possibly engage in AGP8x
transfers,
Quoted 3 lines
and i`m suspicious whether R9000 does it at all...
So i think somebody testing it on real AGP3.0-capable hardware would do
good...
I plan to do that as soon as possible.