Skip to contentSkip to conversation

2.4 series IDE troubles

DISCUSSION Dag Bakke 2 participants 3 messages Feb 21, 2003 – Feb 22, 2003

lore
Share & tools
lore

Dag Bakke

author
#0 lore raw
Quoted 2 lines · Alan Cox

With 2.4.21pre (the firs 2.4 IDE I hacked on seriously) pcmcia flash works on my test setups, and gets used fairly hard for digital cameras

Anyone tried booting a recent Toshiba Laptop from PCMCIA?
I have, and it doesn't work. Not that this necessarily has anything to do with the IDE code. I have tried both recent -ac and vanilla.

In short, if I load the kernel from PCMCIA, the CardBus slots disappear from the PCI bus. -> no root device -> boom!

If I load the kernel from any other medium (haven't tried PCMCIA netboot), the CardBus slots are present.

Is this a Toshiba oddity for which there isn't a PCI quirk yet? Any suggestions for debugging?

Dag B.

#1 lore raw
Quoted 10 lines · Dag Bakke
Quoted 2 lines · Alan Cox

With 2.4.21pre (the firs 2.4 IDE I hacked on seriously) pcmcia flash works on my test setups, and gets used fairly hard for digital cameras

Anyone tried booting a recent Toshiba Laptop from PCMCIA?
I have, and it doesn't work. Not that this necessarily has anything to do with the IDE code. I have tried both recent -ac and vanilla.

In short, if I load the kernel from PCMCIA, the CardBus slots disappear from the PCI bus. -> no root device -> boom!

Some toshiba stuff seems to hide the cardbus/pcmcia and fake the attached CD-ROM used for booting as a native IDE device. I assume this is for windows 95/98 installation. Vaio's do something similar but do not hide the cardbus. When the cardbus is initialised on the vaio the magic IDE mapping vanishes

author
#2 lore raw
Quoted 9 lines · Alan Cox
Quoted 8 lines · Dag Bakke
Quoted 2 lines · Alan Cox

With 2.4.21pre (the firs 2.4 IDE I hacked on seriously) pcmcia flash works on my test setups, and gets used fairly hard for digital cameras

Anyone tried booting a recent Toshiba Laptop from PCMCIA?
I have, and it doesn't work. Not that this necessarily has anything to do with the IDE code. I have tried both recent -ac and vanilla.

Quoted 9 lines
Quoted 2 lines

In short, if I load the kernel from PCMCIA, the CardBus slots disappear from the PCI bus. -> no root device -> boom!

Some toshiba stuff seems to hide the cardbus/pcmcia and fake the attached CD-ROM used for booting as a native IDE device. I assume this is for windows 95/98 installation. Vaio's do something similar but do not hide the cardbus. When the cardbus is initialised on the vaio the magic IDE mapping vanishes

I boot from CF in a PCMCIA sleeve. Sorry for not being clear about that. But in any case:

even if these toshibas you mention above "fake the attached CD-ROM used for booting as a native IDE device", that IDE device has to be visible after the operating system has initialized? Pretty hard to install anything from CD-ROM otherwise...?

The way it looks to me, this is more a question about the PCI subsystem in the toshiba. Of course, I could be totally off base.

Anyone got any great ideas about how to beat the Toshiba into submission and make it admit that it has the cardbus slots it just booted from?

Perhaps some poking in the magic registers of these animals?
(http://www.buzzard.org.uk/toshiba/docs.html)
Not sure if Jonathan still maintains the Toshiba utilities/docs, though.

Dag B