2.5.64-mm1: Badness in request_irq
Hello,
I have just installed and compiled 2.5.64-mm1 using gcc-3.2.2 and, when booting the system, I have found the following error on the kernel ring:
Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace: [<c010afdd>] [<d08b3d3a>] [<d08b18c0>] [<d08b42c8>] [<d08b024e>] [<d08b42b0>] [<d08b49c0>] [<d08b49e8>] [<c0191d6e>] [<d08b496c>] [<d08b49e8>] [<c01947f5>] [<d08b49e8>] [<c019491c>] [<d08b49e8>] [<d08b4a04>] [<c0194c10>] [<d08b49e8>] [<d08bb160>] [<c0194fff>] [<d08b49e8>] [<c0191eab>] [<d08b49e8>] [<d08a0019>] [<d08b49c0>] [<d08bb160>] [<c01302cd>]
[<c010969e>]
This didn't happen with stock 2.5.64. I have attached the "config" file used to build the kernel along with a "dmesg" of the offending kernel.
Please, contact me for further information :-)
Best regards,
Felipe Alfaro Solana
Signature · 5 lines
______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze
Quoted 6 lines · Felipe Alfaro Solana
Hello,
I have just installed and compiled 2.5.64-mm1 using gcc-3.2.2 and, when booting the system, I have found the
following error on the kernel ring:
Quoted 6 lines
Badness in
request_irqatarch/i386/kernel/irq.c:475Call Trace: [<c010afdd>] [<d08b3d3a>] [<d08b18c0>] [<d08b42c8>] [<d08b024e>] [<d08b42b0>] [<d08b49c0>] [<d08b49e8>] [<c0191d6e>] [<d08b496c>] [<d08b49e8>] [<c01947f5>] [<d08b49e8>] [<c019491c>] [<d08b49e8>] [<d08b4a04>] [<c0194c10>] [<d08b49e8>] [<d08bb160>] [<c0194fff>] [<d08b49e8>] [<c0191eab>] [<d08b49e8>] [<d08a0019>] [<d08b49c0>] [<d08bb160>] [<c01302cd>][<
c010969e>]
I'm getting this as well on both my desktop and laptop machines.
My desktop is a P4 machine with an Intel 845 chipset. It seems to be coming out of the PIIX driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 10 for device 00:1f.1
PCI: Sharing IRQ 10 with 00:1d.2
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD1200JB-00CRA1, ATA DISK drive
Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace:
[<c010b240>] request_irq+0xe2/0x116
[<c020c2ec>] init_irq+0x12e/0x342
[<c020af9a>] ide_intr+0x0/0x12a
[<c020c95f>] hwif_init+0xe3/0x27c
[<c020c060>] probe_hwif_init+0x2c/0x78
[<c021db14>] ide_setup_pci_device+0x4e/0x74
[<c0209c4c>] piix_init_one+0x32/0x38
[<c010507b>] init+0x2d/0x146
[<c010504e>] init+0x0/0x146
[<c01073b9>] kernel_thread_helper+0x5/0xcanticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace: [<c010b240>] request_irq+0xe2/0x116 [<c020c2ec>] init_irq+0x12e/0x342 [<c020af9a>] ide_intr+0x0/0x12a [<c020c95f>] hwif_init+0xe3/0x27c [<c020c060>] probe_hwif_init+0x2c/0x78 [<c021db33>] ide_setup_pci_device+0x6d/0x74 [<c0209c4c>] piix_init_one+0x32/0x38 [<c010507b>] init+0x2d/0x146 [<c010504e>] init+0x0/0x146 [<c01073b9>] kernel_thread_helper+0x5/0xc
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
The laptop is getting the message in the ALSA i810 audio driver:
PCI: Found IRQ 11 for device 00:00.1
PCI: Sharing IRQ 11 with 00:0b.1
Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace: [<cc8b86c0>] snd_intel8x0_interrupt+0x0/0x190 [snd_intel8x0] [<c010ad33>] request_irq+0x63/0xd0 [<cc8ba8e5>] snd_intel8x0_create+0x245/0x460 [snd_intel8x0] [<cc8b86c0>] snd_intel8x0_interrupt+0x0/0x190 [snd_intel8x0] [<cc8bb2cb>] .LC54+0x0/0x13 [snd_intel8x0] [<cc8babdf>] snd_intel8x0_probe+0xdf/0x320 [snd_intel8x0] [<cc8beb28>] driver+0x28/0x98 [snd_intel8x0] [<c01c237f>] pci_device_probe+0x3f/0x60 [<cc8be50c>] snd_intel8x0_ids+0x8c/0x1a0 [snd_intel8x0] [<cc8beb00>] driver+0x0/0x98 [snd_intel8x0] [<cc8beb28>] driver+0x28/0x98 [snd_intel8x0] [<cc8beb28>] driver+0x28/0x98 [snd_intel8x0] [<c01ca314>] bus_match+0x34/0x60 [<c01ca3d4>] driver_attach+0x34/0x60 [<cc8beb28>] driver+0x28/0x98 [snd_intel8x0] [<cc8beb48>] driver+0x48/0x98 [snd_intel8x0] [<c01ca686>] bus_add_driver+0x96/0xc0 [<cc8beb28>] driver+0x28/0x98 [snd_intel8x0] [<cc8bed40>] +0x0/0x100 [snd_intel8x0] [<c01c2496>] pci_register_driver+0x46/0x60 [<cc8beb28>] driver+0x28/0x98 [snd_intel8x0] [<cc85f00f>] +0xf/0x80 [snd_intel8x0] [<cc8beb00>] driver+0x0/0x98 [snd_intel8x0] [<c012ed8c>] sys_init_module+0x7c/0x200 [<cc8bed40>] +0x0/0x100 [snd_intel8x0] [<c012ee52>] sys_init_module+0x142/0x200 [<c0108e47>] syscall_call+0x7/0xb
PCI: Setting latency timer of device 00:00.1 to 64
intel8x0: clocking to 48000
lspci output for both machines attached.
J
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
Subsystem: Asustek Computer, Inc.: Unknown device 8088
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000dfff Memory behind bridge: e6000000-e7dfffff Prefetchable memory behind bridge: e7f00000-efffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at d000 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: e5000000-e57fffff
Prefetchable memory behind bridge: e7e00000-e7efffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
01:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 GTS] (rev a3) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c50
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at e7ff0000 [disabled] [size=64K]
Capabilities: <available only to root>
02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b800 [size=256]
Capabilities: <available only to root>
02:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
Subsystem: Netgear FA310TX Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b400 [size=128]
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=256K]
02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs CT4830 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b000 [size=32]
Capabilities: <available only to root>
02:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at a800 [size=8]
Capabilities: <available only to root>
00:00.0 Host bridge: Intel Corporation 82440MX I/O Controller (rev 01)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
00:00.1 Multimedia audio controller: Intel Corporation 82440MX AC'97 Audio Controller
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at fd00 [size=256]
Region 1: I/O ports at fcc0 [size=64]
00:02.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
Subsystem: Toshiba America Info Systems: Unknown device 0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 02f8 [size=8]
Region 2: I/O ports at 1c00 [size=256]
Capabilities: <available only to root>
00:04.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/MX-/IX (rev 11) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: <available only to root>
00:07.0 Bridge: Intel Corporation 82440MX PCI to ISA Bridge (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82440MX EIDE Controller (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at f870 [size=16]
00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host Controller (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at f840 [size=32]
00:07.3 Bridge: Intel Corporation 82440MX Power Management Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 IRDA controller: Toshiba America Info Systems FIR Port Type-DO
Subsystem: Toshiba America Info Systems FIR Port Type-DO
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f820 [size=32]
Capabilities: <available only to root>
00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=04, sec-latency=0 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin B routed to IRQ 11 Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=05, subordinate=08, sec-latency=0 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00001800-000018ff I/O window 1: 00002000-000020ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001
05:00.0 Ethernet controller: Bridgecom, Inc: Unknown device 1985 (rev 11)
Subsystem: Ambicom Inc: Unknown device 2103
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at 11000000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 10c00000 [size=128K]
Capabilities: <available only to root>
Quoted 8 lines · Jeremy Fitzhardinge
Quoted 6 lines · Felipe Alfaro Solana
Hello,
I have just installed and compiled 2.5.64-mm1 using gcc-3.2.2 and, when booting the system, I have found the
following error on the kernel ring:
Quoted 9 lines
Quoted 6 lines
Badness in
request_irqatarch/i386/kernel/irq.c:475Call Trace: [<c010afdd>] [<d08b3d3a>] [<d08b18c0>] [<d08b42c8>] [<d08b024e>] [<d08b42b0>] [<d08b49c0>] [<d08b49e8>] [<c0191d6e>] [<d08b496c>] [<d08b49e8>] [<c01947f5>] [<d08b49e8>] [<c019491c>] [<d08b49e8>] [<d08b4a04>] [<c0194c10>] [<d08b49e8>] [<d08bb160>] [<c0194fff>] [<d08b49e8>] [<c0191eab>] [<d08b49e8>] [<d08a0019>] [<d08b49c0>] [<d08bb160>] [<c01302cd>][<
c010969e>]I'm getting this as well on both my desktop and laptop machines.
Yeah, sorry. Any request_irq(SA_INTERRUPT|SA_SHIRQ) call will do this.
The problem is that when an SA_INTERRUPT handler shares with a non-SA_INTERRUPT one, the result is basically meaningless. The SA_INTERRUPT handler may (or may not) get executed with interrupts off.
So the intent was to drop a warning saying "hey, someone is being silly here".
And it _is_ silly, because what the caller is saying is "I want my handler to run with interrupts disabled, but I am also prepared to share the IRQ with damn near any other interrupt handler in the kernel".
That warning has to go. My current thinking is as follows:
- Each time a handler is registered or removed from the chain, we walk the IRQ chain and propogate some accumulated info into the controlling irq_desc_t.
- If all handlers in the chain are SA_INTERRUPT then the entire chain is run with irqs disabled.
- If _any_ handler is !SA_INTERRUPT then all handlers are run with IRQs enabled.
This gives sane and documentable semantics. It also means that any SA_INTERRUPT handler which is also SA_SHIRQ _must_ be prepared to be called
with irq's enabled. That is already the case: it is merely being formalised.
If a handler MUST be run with interrupts disabled (for atomicity reasons, say) then it cannot share. That's the caller's responsibility.
(One might argue that if any handlers in the chain are SA_INTERRUPT then all handlers should run with irq's off. Problem is, the !SA_INTERRUPT handlers could easily be doing foo_lock_irq()/foo_unlock_irq(), because they think they were called with irq's enabled).
It's all a bit murky.
Quoted 6 lines · Jeremy Fitzhardinge
Quoted 5 lines · Felipe Alfaro Solana
Hello,
I have just installed and compiled 2.5.64-mm1 using gcc-3.2.2 and, when booting the system, I have found the
following error on the kernel ring:
Known problem. Once the core IRQ code is fixed in one of the suitable ways people have suggested I'll sort the IDE layer out to match