Patch to enable IR on Audigy 2 Drive
Hi, I've been having a frustrating couple of days getting IR to work on my brand new Audigy2 drive... Lots of people seem to have it working, but for me, it refused. Enabling it under windows showed that the IR _did_ work, and if I rebooted immediately into linux, IR worked there too (although not after a power cycle).
It turns out the Audigy2 (and maybe the Audigy as well? I don't know) has a different port (A_IOCFG instead of A_HCFG) for accessing the GPIO registers... This is actually in the OSS driver, but hadn't made it across to ALSA. I assume the people who had this working were all using the OSS driver.
I'd like to point out that I've only done this for the IR.. it might be an idea to check the ALSA emu101k source for other occurences of this for the Audigy2..
Here's a patch against CVS to the IR enabling code.
--- CUT HERE ---
Index: include/emu10k1.h
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/include/emu10k1.h,v retrieving revision 1.23
diff -r1.23 emu10k1.h
236a237,238
Quoted 2 lines
#define
A_IOCFG_GPOUT10x0002/* IR */
#defineA_IOCFG_GPOUT20x0001/* IR */
Index: pci/emu10k1/emu10k1_main.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v retrieving revision 1.22
diff -r1.22 emu10k1_main.c
224,230c224,239
< if (enable_ir) { /* enable IR for SB Live */
< unsigned int reg = inl(emu->port + HCFG);
< outl(reg | HCFG_GPOUT2, emu->port + HCFG);
< udelay(500);
< outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG);
< udelay(100);
< outl(reg, emu->port + HCFG);
---
Quoted 8 lines
if (enable_ir) { /* enable IR for SB Live/Audigy */
if (emu->audigy) {
unsigned int reg = inl(emu->port + A_IOCFG);
outl(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(500);
outl(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(100);
outl(reg, emu->port + A_IOCFG);Quoted 8 lines
} else {
unsigned int reg = inl(emu->port + HCFG);
outl(reg | HCFG_GPOUT2, emu->port + HCFG);
udelay(500);
outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG);
udelay(100);
outl(reg, emu->port + HCFG);
}--- CUT HERE ---
Signature · 7 lines
adq ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
Oh, BTW, you have to use /dev/snd/midiC0D1 for it to work with lircd.. the /dev/midi, /dev/midi00, /dev/sequencer OSS compatability layers DO NOT work.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Takashi Iwai
AppliedAt Mon, 10 Mar 2003 22:31:31 +0000,
Quoted 13 lines · Andrew de Quincey
Hi, I've been having a frustrating couple of days getting IR to work on my brand new Audigy2 drive... Lots of people seem to have it working, but for me, it refused. Enabling it under windows showed that the IR _did_ work, and if I rebooted immediately into linux, IR worked there too (although not after a power cycle).
It turns out the Audigy2 (and maybe the Audigy as well? I don't know) has a different port (
A_IOCFGinstead ofA_HCFG) for accessing the GPIO registers... This is actually in the OSS driver, but hadn't made it across to ALSA. I assume the people who had this working were all using the OSS driver.
Quoted 5 lines
I'd like to point out that I've only done this for the IR.. it might be an idea to check the ALSA emu101k source for other occurences of this for the Audigy2..
Here's a patch against CVS to the IR enabling code.
thanks, applied to cvs now.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en