Skip to contentSkip to conversation

[2.4.20] Ask for advice: problems with 3Ware controller

DISCUSSION Jan Marek 1 participant 1 message Mar 18, 2003

lore
Share & tools
lore

Jan Marek

author
#0 lore raw

Hallo l-k,

I have problems with 3ware Escalade 7500-8 controller under 2.4.20 kernel. Time to time I've found some processes in 'D' state and I've found in the dmesg this messages:

3w-xxxx: scsi0: Unit #0: Command (f7a68c00) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a64a00) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a71a00) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a65200) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a63200) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a67a00) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a6ea00) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a7a400) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a6be00) timed out, resetting card. 3w-xxxx: scsi0: Unit #0: Command (f7a65400) timed out, resetting card.

Please, can anyone advice me, what happends? It's problem in the 3ware board, have I use newer firmware on it... ? Can I do somethink with this behavior?

Info from /proc interface:

/proc/scsi/3w-xxxx# cat 0

scsi0: 3ware Storage Controller
Driver version: 1.02.00.031
Current commands posted:         0
Max commands posted:           255
Current pending commands:        0
Max pending commands:            0
Last sgl length:                 1
Max sgl length:                 32
Last sector count:               8
Max sector count:              256
Resets:                          0
Aborts:                        1365

AEN's: 0

Thank you for any advices...

Sincerely
Jan Marek

Signature · 4 lines
Ing. Jan Marek
University of South Bohemia
Academic Computer Centre
Phone: +420-38-7772080