Skip to contentSkip to conversation

kernel 2.5.65/modutils 2.4.21/tools 0.9.10: /etc/modules.conf ignored?

DISCUSSION Felipe Alfaro Solana 2 participants 2 messages Mar 23, 2003

lore
Share & tools
lore
#0 lore raw

----- Original Message -----
From: Michael Frank <[email protected]>
Date: Sun, 23 Mar 2003 14:09:34 +0800
To: [email protected]
Subject: kernel 2.5.65/modutils 2.4.21/tools 0.9.10: /etc/modules.conf ignored?

Quoted 3 lines

- I have installed the above and encounter that all aliases in /etc/modules.conf don't work with 2.4.65. The same system is ok with 2.4.21-pre5.

Uh? Are you using Rusty's latest 2.5.x modutils? If so, /etc/modules.conf has been superseded by /etc/modprobe.conf. Take a look at modutils configuration and extra utils, as there is a tools used to automatically migrate from modules.conf to modprobe.conf.

I haven't had problems wirh module aliases. For example, iso9660 is called isofs in 2.5, so I set up an alias for this module.

Felipe

Signature · 5 lines
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze
#1 lore raw

Felipe,

Thank you very much for this input. I use rusty's latest modutils and rpmbuild those from SRPM never seing the documentation hidden in .

For those who might have the same problem, I found info in module-init-tools-0.9.10/README available from http://www.kernel.org/pub/linux/kernel/people/rusty/modules

It is working now.

Thank you you again,
Michael

Quoted 22 lines · Felipe Alfaro Solana

----- Original Message -----
From: Michael Frank <[email protected]>
Date: Sun, 23 Mar 2003 14:09:34 +0800
To: [email protected]
Subject: kernel 2.5.65/modutils 2.4.21/tools 0.9.10:
/etc/modules.conf ignored?

Quoted 3 lines

- I have installed the above and encounter that all aliases in /etc/modules.conf don't work with 2.4.65. The same system is ok with 2.4.21-pre5.

Uh? Are you using Rusty's latest 2.5.x modutils? If so, /etc/modules.conf has been superseded by /etc/modprobe.conf. Take a look at modutils configuration and extra utils, as there is a tools used to automatically migrate from modules.conf to modprobe.conf.

I haven't had problems wirh module aliases. For example, iso9660 is called isofs in 2.5, so I set up an alias for this module.

Felipe