2.4.21-pre6 and usb-uhci
Hello,
[ i'm not subscribed, so please cc me on any follow ups]
with kernel 2.4.21-pre6 my usb mouse stopped working (actually all usb stuff stopped working). It's a logitech optical mouse which worked perfectly under -pre5. I'm using the usb-uhci module. I get no failures are anything of that kind. dmesg just says:
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]> hid-core.c: USB HID support drivers
and
mice: PS/2 mouse device common for all mice
On my laptop (same mouse, same usb controllor) I also get these problems. It looks to me if usb-uhci is not loaded or something, on -pre5 I get
this from my logs:
usb-uhci.c: $Revision: 1.275 $ time 10:38:36 Apr 1 2003 usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
PCI: Sharing IRQ 9 with 00:08.0usb-uhci.c: USB UHCI at I/O 0xfca0, IRQ 9 usb-uhci.c: Detected 2 ports
on -pre6 there are no such lines. Do I have to something differently in pre6? Btw, the usb-uhci drivers is compiled into the kernel.
grtz Miek
--
:wq!
try using it as a module!
from greg:
Quoted 9 lines
Yes, the usb host controller drivers do not get built in 2.4.21-pre6 if
selected to be compiled into the kernel. This was my fault, and a patch
has been sent to Marcelo to fix this.Sorry,
greg k-h
Regards,
Martin
Signature · 17 lines
Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de> Werner-von-Siemens-Str. 6 86159 Augsburg (Germany) Tel: [+49-821-450448-16] <---> Fax: [+49-821-450448-11] -------------------------------------------------------------------- This email, together with any attachments, is for the exclusive and confidential use of the addressee(s). Any other distribution, use or reproduction without the sender's prior consent is unauthorised and strictly prohibited. If you have received this message in error, please notify the sender by email immediately and delete the message from your computer without making copies.
try using it as a module!
from greg:
Quoted 9 lines
Yes, the usb host controller drivers do not get built in 2.4.21-pre6 if
selected to be compiled into the kernel. This was my fault, and a patch
has been sent to Marcelo to fix this.Sorry,
greg k-h
Regards,
Martin
Signature · 17 lines
Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de> Werner-von-Siemens-Str. 6 86159 Augsburg (Germany) Tel: [+49-821-450448-16] <---> Fax: [+49-821-450448-11] -------------------------------------------------------------------- This email, together with any attachments, is for the exclusive and confidential use of the addressee(s). Any other distribution, use or reproduction without the sender's prior consent is unauthorised and strictly prohibited. If you have received this message in error, please notify the sender by email immediately and delete the message from your computer without making copies.
[On 01 Apr, @12:04, Martin wrote in "Re: 2.4.21-pre6 and usb-uhci ..."]
Quoted 13 lines
try using it as a module!
from greg:
Quoted 9 lines
Yes, the usb host controller drivers do not get built in 2.4.21-pre6 if
selected to be compiled into the kernel. This was my fault, and a patch
has been sent to Marcelo to fix this.Sorry,
greg k-h
thanks, didn't see this message when looking for a solution...
grtz Miek
Quoted 7 lines · Miek Gieben
Hello,
[ i'm not subscribed, so please cc me on any follow ups]
with kernel 2.4.21-pre6 my usb mouse stopped working (actually all usb stuff stopped working). It's a logitech optical mouse which worked perfectly under -pre5. I'm using the usb-uhci module. I get no failures are anything of that
I get the same problem. This includes a Logitech keyboard, two joysticks and a Linksys WUSB11 wlan adapter. None of them show up.
Signature · 4 lines
Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ Subversion - http://subversion.tigris.org/ Deqo - http://www.deqo.com/
Quoted 11 lines · Ben Collins
Quoted 7 lines · Miek Gieben
Hello,
[ i'm not subscribed, so please cc me on any follow ups]
with kernel 2.4.21-pre6 my usb mouse stopped working (actually all usb stuff stopped working). It's a logitech optical mouse which worked perfectly under -pre5. I'm using the usb-uhci module. I get no failures are anything of that
I get the same problem. This includes a Logitech keyboard, two joysticks and a Linksys WUSB11 wlan adapter. None of them show up.
drivers/usb/Makefile is borked, it doesn't link in the USB host controller drivers when you enable them statically into the kernel.
Signature · 1 line
David S. Miller <[email protected]>