PPPoE is not working with 2.5.65-67

Hi all!
I have problem starting PPPoE (rp-pppoe) on linux-2.5.65-67

System:
Slackware-9.0
GCC-3.2.2
Glibc-2.3.1

Config:
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_KMOD is not set
-----------------------------------------------------
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=m
----------------------------------------------------
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set #- doesn't need it with rp-pppoe # CONFIG_SLIP is not set
----------------------------------------------------

# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVFS_DEBUG=y
# CONFIG_DEVPTS_FS is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
------------------------------------------------------------------------

LOGS:
Kernel messages:

Apr  8 14:24:12 localhost kernel: eth0: 3c5x9 at 0x300, 10baseT port, address  
00 a0 24 1d f4 7e, IRQ 10.
Apr  8 14:24:12 localhost kernel: 3c509.c:1.19b 08Nov2002 [email protected]
Apr  8 14:24:12 localhost kernel: http://www.scyld.com/network/3c509.html

Apr  8 14:24:22 localhost kernel: eth0: Setting 3c5x9/3c5x9B half-duplex mode 
if_port: 0, sw_info: 1321
Apr  8 14:24:22 localhost kernel: CSLIP: code copyright 1989 Regents of the 
University of California
Apr  8 14:24:22 localhost kernel: PPP generic driver version 2.4.2
Apr  8 14:24:22 localhost kernel: Module ppp_async cannot be unloaded due to 

unsafe usage in include/linux/module.h:428

Syslog:

Apr  8 14:24:22 localhost kernel: eth0: Setting 3c5x9/3c5x9B half-duplex mode 
if_port: 0, sw_info: 1321
Apr  8 14:24:22 localhost kernel: Module ppp_async cannot be unloaded due to 
unsafe usage in include/linux/module.h:428
Apr  8 14:24:53 localhost pppd[158]: LCP: timeout sending Config-Requests
Apr  8 14:24:57 localhost pppoe[159]: Timeout waiting for PADO packets
Apr  8 14:27:32 localhost pppd[429]: LCP: timeout sending Config-Requests
Apr  8 14:27:36 localhost pppoe[430]: Timeout waiting for PADO packets

--------------------------------------------------------------------------
All was working fine in 2.5.52

Nastor