Skip to contentSkip to conversation

VIA8235 SPDIF problems

DISCUSSION Andrew de Quincey 1 participant 4 messages Apr 13, 2003 – Apr 22, 2003 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi, I have a Shuttle SK41G machine. This has a VIA8235, with an Avance Logic ALC 650 Rev 0 on it.

Problem: I want to use the digital out on this board talking to my digital receiver for normal audio. I also want to have AC3/DTS passthrough when playing DVDs.

Something is playing up. Usually, I can get AC3 passthrough working for DVDs.. after a bit of random flailing at the mixer devices, but I can't always. I haven't been able to identify a consistent pattern of changes to make to make it 100% reliable. It just seems to "start working" eventually.

I can't get non-AC3/DTS digital audio output to work at all. My decoder DOES light up its wee "Digital" light when I starting playing something, but there is no sound. Oddly enough, I'm pretty sure I DID have this working at one point, but I cannot get anything now.

I'm changing: IEC958, IEC958 Input Monitor, IEC958 Output, IEC958 Playback AC97-SPSA, and Analog to IEC958 Output.. oh, and PCM, Master are set quite high.

I've also tried sending the output to the "iec958/spdif" devices, but with no luck (although this does seem to change which combinations of mixer settings mean my decoder light the DIGITAL light)

I'm using the latest CVS of ALSA, with Xine 1.0beta10.

Why am I posting this here? I'm going to try messing with the code to try and fix this, but I'm hoping someone can suggest some things for me to try as I am hampered by a lack of VIA8235 docs.

Finally, what are these "VIA DXS" mixer devices? I now have four of them and none of them seems to affect anything!

-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Re: Recurring VIA8235 SPDIF problems

Quoted 24 lines · Andrew de Quincey
Quoted 7 lines · Andrew de Quincey

Hi, I have a Shuttle SK41G machine. This has a VIA8235, with an Avance Logic ALC 650 Rev 0 on it.

Problem: I want to use the digital out on this board talking to my digital receiver for normal audio. I also want to have AC3/DTS passthrough when playing DVDs.

Quoted 5 lines

Something is playing up. Usually, I can get AC3 passthrough working for DVDs.. after a bit of random flailing at the mixer devices, but I can't always. I haven't been able to identify a consistent pattern of changes to make to make it 100% reliable. It just seems to "start working" eventually.

Hi, I thought this was fixed. However, something like it has happenened again.

AC3 passthrough: works
SPDIF (digital) out: works, but I have to set my receiver at MAX volume to hear it
Analogue output: not working.

I rebooted and pulled the plug out for a bit

Quoted 8 lines

AC3 passthrough: works
SPDIF (digital) out: not working. DIGITAL light on reciver does not light Analogue output: works, but there is a constant high pitched whine. I'm listening with a pair of headphones connected directly to the box so this is not my receiver.

Any ideas anyone? My mixer settings are the same as they were what it was working

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw

Re: Re: Recurring VIA8235 SPDIF problems

Quoted 25 lines · Andrew de Quincey
Quoted 24 lines · Andrew de Quincey
Quoted 7 lines · Andrew de Quincey

Hi, I have a Shuttle SK41G machine. This has a VIA8235, with an Avance Logic ALC 650 Rev 0 on it.

Problem: I want to use the digital out on this board talking to my digital receiver for normal audio. I also want to have AC3/DTS passthrough when playing DVDs.

Quoted 5 lines

Something is playing up. Usually, I can get AC3 passthrough working for DVDs.. after a bit of random flailing at the mixer devices, but I can't always. I haven't been able to identify a consistent pattern of changes to make to make it 100% reliable. It just seems to "start working" eventually.

Hi, I thought this was fixed. However, something like it has happenened again.

AC3 passthrough: works
SPDIF (digital) out: works, but I have to set my receiver at MAX volume to hear it
Analogue output: not working.

I rebooted and pulled the plug out for a bit

Quoted 8 lines
Quoted 8 lines

AC3 passthrough: works
SPDIF (digital) out: not working. DIGITAL light on reciver does not light Analogue output: works, but there is a constant high pitched whine. I'm listening with a pair of headphones connected directly to the box so this is not my receiver.

Any ideas anyone? My mixer settings are the same as they were what it was working

OK, a couple of reboots later, and SPDIF out is on again... but its still very very quiet. I cannot seem to find any controls for modifying the volume of data going out over SPDIF.. does that even make sense? I'm not sure where the SPDIF samples the data.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw

Re: Recurring VIA8235 SPDIF problems

Quoted 5 lines

OK, a couple of reboots later, and SPDIF out is on again... but its still very very quiet. I cannot seem to find any controls for modifying the volume of data going out over SPDIF.. does that even make sense? I'm not sure where the SPDIF samples the data.

And once more it dies. This is not a mixer or configuration problem, it has to be a driver issue.

Its like SPDIF is enabled, but "something" on the card to do with SPDIF output is NOT being enabled at random so the output my receiver receives is very very low...

If I unload and reload the driver lots of times, it tends to eventually work.

Anyone got any ideas where I can start debugging this? Theres no error output in syslog.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf