duplicate volume group names
hi,
------------
# vgscan vgscan -- reading all physical volumes (this may take a while...) vgscan -- found active volume group "vg0" vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group
# vgchange -a y vgchange -- volume group "vg0" already active
# pvscan pvscan -- reading all physical volumes (this may take a while...) pvscan -- ACTIVE PV "/dev/ide/host2/bus0/target0/lun0/part3" of VG "vg0" [55.71 GB / 14.14 GB free] pvscan -- inactive PV "/dev/ide/host2/bus0/target1/lun0/part3" of VG "vg0" [37.07 GB / 280 MB free] pvscan -- total: 2 [92.79 GB] / in use: 2 [92.79 GB] / in no VG: 0 [0]
----------
and the question:
is it possible to get data from the second hdd if it has the same volume name?
the second hardrive comes from a different computer and has nothing to do with the 'vg0' of the first (system) hdd
do i need to change the name of the volume group name of the system disk first?
regards
ps. plz respond to private email as i am not subscribed to the list
Signature · 4 lines
Michal Adamczak pokryfka @ druid.if.uj.edu.pl GS dpu C+++ UL+++++ L+++(++++) w--- !tv h* I code AND I bathe. (seen on slashdot)
Michal,
detach the 2nd HDD, vgrename "vg0" to something, reattach the 2nd HDD, run "vgscan;vgchange -ay" and you should be able to access both. Keep necessary /etc/fstab changes in mind doing so.
Regular procedure for such VG moves from one computer to another is "vgchange -an VG ; vgexport VG" on the 1st one, move PVs to the 2nd computer and run "vgimport VG PVPath [PVPath...]" there.
Regards,
Heinz -- The LVM Guy --
Quoted 30 lines · MichalAdamczak
hi,
------------
# vgscan vgscan -- reading all physical volumes (this may take a while...) vgscan -- found active volume group "vg0" vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group# vgchange -a y vgchange -- volume group "vg0" already active# pvscan pvscan -- reading all physical volumes (this may take a while...) pvscan -- ACTIVE PV "/dev/ide/host2/bus0/target0/lun0/part3" of VG "vg0" [55.71 GB / 14.14 GB free] pvscan -- inactive PV "/dev/ide/host2/bus0/target1/lun0/part3" of VG "vg0" [37.07 GB / 280 MB free] pvscan -- total: 2 [92.79 GB] / in use: 2 [92.79 GB] / in no VG: 0 [0]----------
and the question:
is it possible to get data from the second hdd if it has the same volume name?
the second hardrive comes from a different computer and has nothing to do with the 'vg0' of the first (system) hdd
Quoted 18 lines
do i need to change the name of the volume group name of the system disk first?
regards
ps. plz respond to private email as i am not subscribed to the list
Signature · 10 lines
Michal Adamczak pokryfka @ druid.if.uj.edu.pl GS dpu C+++ UL+++++ L+++(++++) w--- !tv h* I code AND I bathe. (seen on slashdot) _______________________________________________ linux-lvm mailing list [email protected] http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf Germany
[email protected] +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-