APM suspend/resume doesn't work properly

Hi

I tried 2.5.68-mm1 last night and found that after one suspend/resume cycle the 3c574_cs PCMCIA ethernet card didn't work. The only weirdness in the logs is

Apr 21 17:57:47 flat kernel: eth0: command 0x5800 did not complete!
Apr 21 17:58:18 flat last message repeated 1376 times

which appeared after resuming. Once the card was ejected/reinserted the card worked fine.

After that the machine would not go into suspend state. 2.5.66-mm3 worked fine. Didn't try suspend in 2.5.67-mm4.

On the plus side, the 3c574_cs driver fixes seem to work.

Sony Vaio, Celeron 333, Pre-empt, APM, 3c574_cs, Debian sid.

Charlie