Fix pnpbios switch

diff -urpN --exclude-from=/home/davej/.exclude bk-linus/drivers/pnp/pnpbios/core.c linux-2.5/drivers/pnp/pnpbios/core.c
@@ -252,41 +252,59 @@ static void pnpbios_print_status(const c
 {
 	switch(status) {
 	case PNP_SUCCESS:
-	printk(KERN_ERR "PnPBIOS: %s: function successful\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: function successful\n", module);
+		break;
 	case PNP_NOT_SET_STATICALLY:
-	printk(KERN_ERR "PnPBIOS: %s: unable to set static resources\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: unable to set static resources\n", module);
+		break;
 	case PNP_UNKNOWN_FUNCTION:
-	printk(KERN_ERR "PnPBIOS: %s: invalid function number passed\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: invalid function number passed\n", module);
+		break;
 	case PNP_FUNCTION_NOT_SUPPORTED:
-	printk(KERN_ERR "PnPBIOS: %s: function not supported on this system\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: function not supported on this system\n", module);
+		break;
 	case PNP_INVALID_HANDLE:
-	printk(KERN_ERR "PnPBIOS: %s: invalid handle\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: invalid handle\n", module);
+		break;
 	case PNP_BAD_PARAMETER:
-	printk(KERN_ERR "PnPBIOS: %s: invalid parameters were passed\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: invalid parameters were passed\n", module);
+		break;
 	case PNP_SET_FAILED:
-	printk(KERN_ERR "PnPBIOS: %s: unable to set resources\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: unable to set resources\n", module);
+		break;
 	case PNP_EVENTS_NOT_PENDING:
-	printk(KERN_ERR "PnPBIOS: %s: no events are pending\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: no events are pending\n", module);
+		break;
 	case PNP_SYSTEM_NOT_DOCKED:
-	printk(KERN_ERR "PnPBIOS: %s: the system is not docked\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: the system is not docked\n", module);
+		break;
 	case PNP_NO_ISA_PNP_CARDS:
-	printk(KERN_ERR "PnPBIOS: %s: no isapnp cards are installed on this system\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: no isapnp cards are installed on this system\n", module);
+		break;
 	case PNP_UNABLE_TO_DETERMINE_DOCK_CAPABILITIES:
-	printk(KERN_ERR "PnPBIOS: %s: cannot determine the capabilities of the docking station\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: cannot determine the capabilities of the docking station\n", module);
+		break;
 	case PNP_CONFIG_CHANGE_FAILED_NO_BATTERY:
-	printk(KERN_ERR "PnPBIOS: %s: unable to undock, the system does not have a battery\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: unable to undock, the system does not have a battery\n", module);
+		break;
 	case PNP_CONFIG_CHANGE_FAILED_RESOURCE_CONFLICT:
-	printk(KERN_ERR "PnPBIOS: %s: could not dock due to resource conflicts\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: could not dock due to resource conflicts\n", module);
+		break;
 	case PNP_BUFFER_TOO_SMALL:
-	printk(KERN_ERR "PnPBIOS: %s: the buffer passed is too small\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: the buffer passed is too small\n", module);
+		break;
 	case PNP_USE_ESCD_SUPPORT:
-	printk(KERN_ERR "PnPBIOS: %s: use ESCD instead\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: use ESCD instead\n", module);
+		break;
 	case PNP_MESSAGE_NOT_SUPPORTED:
-	printk(KERN_ERR "PnPBIOS: %s: the message is unsupported\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: the message is unsupported\n", module);
+		break;
 	case PNP_HARDWARE_ERROR:
-	printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occured\n", module);
+		printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occured\n", module);
+		break;
 	default:
-	printk(KERN_ERR "PnPBIOS: %s: unexpected status 0x%x\n", module, status);
+		printk(KERN_ERR "PnPBIOS: %s: unexpected status 0x%x\n", module, status);
+		break;
 	}
 }