Skip to contentSkip to conversation

USB Storage oops in 2.5.69-bk8

linux-usb-devel Florin Iucha 2 participants 3 messages May 16, 2003 SCSI

lore
Share & tools
lore
#0 lore raw

----- Forwarded message from Alan Stern <[email protected]> -----

Quoted 55 lines

Subject: Re: [linux-usb-devel] USB Storage oops in 2.5.69-bk8
From: Alan Stern <[email protected]>
To: Florin Iucha <[email protected]>
Cc: USB development list <[email protected]>
Date: Fri, 16 May 2003 11:49:00 -0400 (EDT)

Quoted 47 lines · Florin Iucha

Hello,

I get the following oops in 2.5.69-bk8 when I try to mount a Compact Flash card in a SanDisk adapter:

usb 2-1: USB disconnect, address 2
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:0: new USB device on port 1, assigned address 3
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-00:02.3-1 usb 2-1: USB disconnect, address 3
drivers/usb/input/hid-core.c: can't resubmit intr, 00:02.3-1/input0, status -19 hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:0: new USB device on port 1, assigned address 4
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-00:02.3-1 SCSI device sda: 31232 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 02 00 00 00
drivers/usb/core/message.c: usb_control/bulk_msg: timeout drivers/usb/core/message.c: usb_control/bulk_msg: timeout drivers/usb/core/hub.c: USB device not accepting new address (error=-22)
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0 usb 5-2: USB disconnect, address 2

Unable to handle kernel paging request at virtual address 544150a8
 printing eip:
c02abc39
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c02abc39>]    Not tainted
EFLAGS: 00010286

EIP is at scsi_eh_finish_cmd+0x19/0x60
eax: ef19d000 ebx: eef28080 ecx: eef22140 edx: 54415056
esi: eef21fa8 edi: eef21fb0 ebp: eef21fa8 esp: eef21f60
ds: 007b es: 007b ss: 0068
Process scsi_eh_1 (pid: 118, threadinfo=eef20000 task=eef23340)

Stack: eef28080 eef28080 eef21fb0 c02ac418 eef28080 eef21fa8 00000000 00000000 
       00000000 ef62f428 eef20000 00000282 eef21fa8 c02ac8d6 eef21fb0 eef21fa8 
       eef21fa8 eef21fb0 eef21fa8 eef21fa8 eef28098 eef28098 ef62f400 eef21fd4 
Call Trace:
 [<c02ac418>] scsi_eh_offline_sdevs+0x68/0x80
 [<c02ac8d6>] scsi_unjam_host+0xc6/0xd0
 [<c02ac9b1>] scsi_error_handler+0xd1/0x120
 [<c02ac8e0>] scsi_error_handler+0x0/0x120
 [<c0108abd>] kernel_thread_helper+0x5/0x18

Code: 0f b7 42 52 48 66 89 42 52 c7 43 24 00 00 00 00 66 c7 43 08 
Quoted 8 lines
Quoted 2 lines

I cannot tell if it is a regression since I just got the CF and the adapter.

This is a problem in the SCSI error handler. You should post your question to <[email protected]>. Maybe also cc: to Mike Anderson <[email protected]>.

Alan Stern

----- End forwarded message -----

florin

Signature · 1 line
"NT is to UNIX what a doughnut is to a particle accelerator."
#1 lore raw

This might be a case that the scsi_error handler never reclaimed or canceled the command (i.e., this is a lost command) and probably should not update the fields.

Could you get me a little more data on what the error handler actions where by doing the following:
1.) Ensure SCSI logging is enabled in your config. CONFIG_SCSI_LOGGING=y.

2.) Prior to the mount of the Compact Flash card. echo "scsi log error 4" > /proc/scsi/scsi

If this is getting set dmesg should give a line that scsi logging level set to ...

3.) Mount the Compact Flash card and send me the output when it fails.

Thanks,

Quoted 64 lines · Florin Iucha [[email protected]] wrote:

----- Forwarded message from Alan Stern <[email protected]> -----

Quoted 62 lines

Subject: Re: [linux-usb-devel] USB Storage oops in 2.5.69-bk8
From: Alan Stern <[email protected]>
To: Florin Iucha <[email protected]>
Cc: USB development list <[email protected]>
Date: Fri, 16 May 2003 11:49:00 -0400 (EDT)

Quoted 47 lines · Florin Iucha

Hello,

I get the following oops in 2.5.69-bk8 when I try to mount a Compact Flash card in a SanDisk adapter:

usb 2-1: USB disconnect, address 2
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:0: new USB device on port 1, assigned address 3
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-00:02.3-1 usb 2-1: USB disconnect, address 3
drivers/usb/input/hid-core.c: can't resubmit intr, 00:02.3-1/input0, status -19 hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:0: new USB device on port 1, assigned address 4
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-00:02.3-1 SCSI device sda: 31232 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 02 00 00 00
drivers/usb/core/message.c: usb_control/bulk_msg: timeout drivers/usb/core/message.c: usb_control/bulk_msg: timeout drivers/usb/core/hub.c: USB device not accepting new address (error=-22)
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0 usb 5-2: USB disconnect, address 2

Unable to handle kernel paging request at virtual address 544150a8
 printing eip:
c02abc39
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c02abc39>]    Not tainted
EFLAGS: 00010286

EIP is at scsi_eh_finish_cmd+0x19/0x60
eax: ef19d000 ebx: eef28080 ecx: eef22140 edx: 54415056
esi: eef21fa8 edi: eef21fb0 ebp: eef21fa8 esp: eef21f60
ds: 007b es: 007b ss: 0068
Process scsi_eh_1 (pid: 118, threadinfo=eef20000 task=eef23340)

Stack: eef28080 eef28080 eef21fb0 c02ac418 eef28080 eef21fa8 00000000 00000000 
       00000000 ef62f428 eef20000 00000282 eef21fa8 c02ac8d6 eef21fb0 eef21fa8 
       eef21fa8 eef21fb0 eef21fa8 eef21fa8 eef28098 eef28098 ef62f400 eef21fd4 
Call Trace:
 [<c02ac418>] scsi_eh_offline_sdevs+0x68/0x80
 [<c02ac8d6>] scsi_unjam_host+0xc6/0xd0
 [<c02ac9b1>] scsi_error_handler+0xd1/0x120
 [<c02ac8e0>] scsi_error_handler+0x0/0x120
 [<c0108abd>] kernel_thread_helper+0x5/0x18

Code: 0f b7 42 52 48 66 89 42 52 c7 43 24 00 00 00 00 66 c7 43 08 
Quoted 2 lines

I cannot tell if it is a regression since I just got the CF and the adapter.

This is a problem in the SCSI error handler. You should post your question to <[email protected]>. Maybe also cc: to Mike Anderson <[email protected]>.

Quoted 9 lines
Quoted 1 line

Alan Stern

----- End forwarded message -----

florin

Signature · 1 line
"NT is to UNIX what a doughnut is to a particle accelerator."

-andmike
--
Michael Anderson
[email protected]

#2 lore raw
Quoted 9 lines · Mike Anderson

This might be a case that the scsi_error handler never reclaimed or canceled the command (i.e., this is a lost command) and probably should not update the fields.

Could you get me a little more data on what the error handler actions where by doing the following:
1.) Ensure SCSI logging is enabled in your config. CONFIG_SCSI_LOGGING=y.

Quoted 8 lines

2.) Prior to the mount of the Compact Flash card. echo "scsi log error 4" > /proc/scsi/scsi

If this is getting set dmesg should give a line that scsi logging level set to ...

3.) Mount the Compact Flash card and send me the output when it fails.

Here it is:

scsi logging level set to 0x00000004
SCSI device sda: 31232 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 02 00 00 00
drivers/usb/core/message.c: usb_control/bulk_msg: timeout
Error handler scsi_eh_1 waking up
scsi_eh_prt_fail_stats: 1:0:0:0 cmds failed: 0, cancel: 1
Total of 1 commands on 1 devices require eh work
scsi_eh_1: aborting cmd:0xedac3080
scsi_eh_times_out: scmd:edac3080
scsi_send_eh_cmnd: scmd: edac3080, rtn:2003
scsi_eh_tur: scmd edac3080 rtn 2003
scsi_eh_1: Sending BDR sdev: 0xee133c00
drivers/usb/core/message.c: usb_control/bulk_msg: timeout
scsi_eh_1: BDR failed sdev:0xee133c00
scsi_eh_1: Sending BRST chan: 0
scsi_try_bus_reset: Snd Bus RST
drivers/usb/core/hub.c: USB device not accepting new address (error=-22)
scsi_eh_1: BRST failed chan: 0
scsi_eh_1: Sending HRST
scsi_try_host_reset: Snd Host RST
scsi_eh_1: HRST failed
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
scsi_eh_1: flush finish cmd: edac3080
usb 5-2: USB disconnect, address 2

Unable to handle kernel paging request at virtual address 544150a6
 printing eip:
c02aa5e8
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c02aa5e8>]    Not tainted
EFLAGS: 00010002

EIP is at scsi_host_busy_dec_and_test+0x18/0x8a
eax: ed9f8000 ebx: 00000286 ecx: 54415056 edx: ed9f8000
esi: edac3080 edi: 54415056 ebp: ed9f8000 esp: ed9f9f24
ds: 007b es: 007b ss: 0068
Process scsi_eh_1 (pid: 604, threadinfo=ed9f8000 task=ee15d840)

Stack: c036db3b ee133c00 c02a93fc 54415056 ee133c00 edac3080 edac3080 ed9f9fa8 
       ed9f9fa8 c02ad2bb edac3080 ee15db26 edac3080 ed9f8000 edac3098 ee8a0008 
       ee133c00 ed9f9fb0 c02ad49c ed9f9fa8 ed9f9fa8 ed9f9fa8 00000000 00000000 
Call Trace:
 [<c02a93fc>] scsi_finish_command+0x1c/0x110
 [<c02ad2bb>] scsi_eh_flush_done_q+0x5b/0xe0
 [<c02ad49c>] scsi_unjam_host+0x15c/0x230
 [<c02ad6af>] scsi_error_handler+0x13f/0x1b0
 [<c02ad570>] scsi_error_handler+0x0/0x1b0
 [<c0108abd>] kernel_thread_helper+0x5/0x18

Code: 0f b7 41 50 48 f6 81 92 00 00 00 01 66 89 41 50 74 16 0f b7 
 <6>note: scsi_eh_1[604] exited with preempt_count 1

Thank you,
florin

PS: this trace was obtained on 2.5.69-bk11.

Signature · 1 line
"NT is to UNIX what a doughnut is to a particle accelerator."