new ATI sleep code freezes
Hi all,
This has taken me a while to decide it was a bug and not a freak accident. About one to two times a week I have noticed that my powerbook will hand during the sleep process. Usually, when the sleep operation completes, there is a quick screen power blank. Then about another 1.5 seconds of the LCD being illuminated, with what looks like some random part of video memory being displayed, then finally the machine goes to sleep. Occasionally I am seeing a freeze during the step where the machine stays on for 1.5 seconds and has not quite been put to sleep. I have been unable to diagnose this, as it happens so infrequently, but I figured by posting I could hopefully get some more people experiencing this as well. my specs:
1ghz tipb, 1gig ram, radeon 9M, 2.4.20-ben8
I also do not seem to be doing any tasks at this time, just idling my window manager.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 12 lines · On Thu, 2003-05-29 at 17:41, [email protected] wrote:
Hi all,
This has taken me a while to decide it was a bug and not a freak accident. About one to two times a week I have noticed that my powerbook will hand during the sleep process. Usually, when the sleep operation completes, there is a quick screen power blank. Then about another 1.5 seconds of the LCD being illuminated, with what looks like some random part of video memory being displayed, then finally the machine goes to sleep. Occasionally I am seeing a freeze during the step where the machine stays on for 1.5 seconds and has not quite been put to sleep. I have been unable to diagnose this, as it happens so infrequently, but I figured by posting I could hopefully get some more people experiencing this as well. my specs:
Quoted 1 line
1ghz tipb, 1gig ram, radeon 9M, 2.4.20-ben8
Pretty much the same configuration here, but I haven't seen this, even though I've been enjoying uptimes of weeks, usually with at least one sleep cycle a day.
What's your DRI related setup?
--
Earthling Michel Dänzer \ Debian (powerpc), XFree86 and DRI developer
Software libre enthusiast \ http://svcs.affero.net/rm.php?r=daenzer
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
see below...
Quoted 16 lines · Michel D?nzer
Quoted 12 lines · On Thu, 2003-05-29 at 17:41, [email protected] wrote:
This has taken me a while to decide it was a bug and not a freak accident. About one to two times a week I have noticed that my powerbook will hand during the sleep process. Usually, when the sleep operation completes, there is a quick screen power blank. Then about another 1.5 seconds of the LCD being illuminated, with what looks like some random part of video memory being displayed, then finally the machine goes to sleep. Occasionally I am seeing a freeze during the step where the machine stays on for 1.5 seconds and has not quite been put to sleep. I have been unable to diagnose this, as it happens so infrequently, but I figured by posting I could hopefully get some more people experiencing this as well. my specs:
Quoted 1 line
1ghz tipb, 1gig ram, radeon 9M, 2.4.20-ben8
Quoted 5 lines
Pretty much the same configuration here, but I haven't seen this, even though I've been enjoying uptimes of weeks, usually with at least one sleep cycle a day.
What's your DRI related setup?
hmmm well i don't seem to have _any_ sort of DRI setup. Although you noting for me to look at my XF86Config, i noticed i had left AGPFastWrite enabled for a test i was running for benh a while ago. I will set that off and see if that helps at all. I have attached my XF86Config
Dave
Section "ServerLayout"
Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
#Load "dri"
#Load "drm"
Load "dbe" Load "record" Load "xtrap" Load "glx" Load "speedo" Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
#Option "CustomKeycodes"
Option "XkbModel" "Macintosh" Option "XkbLayout" "us" Option "XkbRules" "xfree"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5" Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model"
UseModes "Modes0"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional
#Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "ForcePCIMode" # [<bool>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> Option "AGPFastWrite" "True"# [<bool>] #Option "AGPSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "CloneDisplay" # <i> #Option "CloneMode" # [<str>] #Option "CloneHSync" # [<str>] #Option "CloneVRefresh" # [<str>]
Option "UseFBDev" "True" # [<bool>]
#Option "VideoKey" # <i>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc" BoardName "Radeon R250 Lf [Radeon Mobility 9000]" BusID "PCI:0:16:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x854"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x854"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x854"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x854"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x854"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x854"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x854"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Modes"
Identifier "Modes0"
# mode generated by Xeasyconf
Modeline "1280x854" 79.815 1280 1296 1408 1536 854 855 858 866 -HSync -VSync
EndSection
Also make sure you have APM emulation working (check XFree log to see if it found & opened the APM device)
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 2 lines · Benjamin Herrenschmidt
Also make sure you have APM emulation working (check XFree log to see if it found & opened the APM device)
from my XF86Config file...
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
But my kernel config says...CONFIG_PMAC_APM_EMU=y
The only thing unusual is I am running devfs..
so i checked /dev
heliosphan dev # find . -name *apm*
./misc/apm_bios
./apm_bios
/dev/misc/apm_bios has perms:
crw------- 1 mutex root 10, 134 Dec 31 1969 apm_bios
are those normal permissions ? Also, I'm running an enlightenment battery applet which afaik uses apm layer to report battery level. So something has to be working.
Dave
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 11 lines · On Thu, 2003-06-05 at 18:35, [email protected] wrote:
Quoted 1 line · Benjamin Herrenschmidt
Also make sure you have APM emulation working (check XFree log to see if it found & opened the APM device)
from my XF86Config file...
(WW) Open APM failed (
/dev/apm_bios) (No such file or directory)But my kernel config says...
CONFIG_PMAC_APM_EMU=yThe only thing unusual is I am running devfs..
Poor boy... ;)
Quoted 6 lines
so i checked /dev
heliosphan dev # find . -name *apm*
./misc/apm_bios
./apm_bios
Quoted 6 lines
/dev/misc/apm_bioshas perms:crw------- 1 mutex root 10, 134 Dec 31 1969
apm_biosare those normal permissions ? Also, I'm running an enlightenment battery applet which afaik uses apm layer to report battery level. So something has to be working. Dave
I don't know wtf with devfs & perms, but the problem is here, once you fix that, it should work much better ;)
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 19 lines · On Thu, 2003-06-05 at 18:35, [email protected] wrote:
Quoted 2 lines · Benjamin Herrenschmidt
Also make sure you have APM emulation working (check XFree log to see if it found & opened the APM device)
from my XF86Config file...
(WW) Open APM failed (
/dev/apm_bios) (No such file or directory)But my kernel config says...
CONFIG_PMAC_APM_EMU=yThe only thing unusual is I am running devfs..
so i checked /devheliosphan dev # find . -name *apm*
./misc/apm_bios
./apm_bios
Quoted 5 lines
/dev/misc/apm_bioshas perms:crw------- 1 mutex root 10, 134 Dec 31 1969
apm_biosare those normal permissions ?
I don't know, I don't use devfs, I have:
crw-rw---- 1 root root 10, 134 2003-04-29 13:04/dev/apm_bios
Anyway, the X server doesn't try to use /dev/misc/apm_bios but /dev/apm_bios and gets ENOENT.
Quoted 2 lines
Also, I'm running an enlightenment battery applet which afaik uses apm layer to report battery level. So something has to be working.
It might use /proc/apm.
--
Earthling Michel Dänzer \ Debian (powerpc), XFree86 and DRI developer
Software libre enthusiast \ http://svcs.affero.net/rm.php?r=daenzer
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/