all archs: Replace O_TARGET with lib-y

@@ -5,8 +5,6 @@
 EXTRA_AFLAGS := $(CFLAGS)
 EXTRA_CFLAGS := -Werror
 
-L_TARGET := lib.a
-
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
 ev6-$(CONFIG_ALPHA_EV6) := ev6-

@@ -14,7 +12,7 @@
 # Several make use of the cttz instruction introduced in ev67.
 ev67-$(CONFIG_ALPHA_EV67) := ev67-
 
-obj-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
+lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
 	udelay.o \
 	$(ev6-y)memset.o \
 	$(ev6-y)memcpy.o \

@@ -43,7 +41,7 @@
 	fpreg.o \
 	callback_srm.o srm_puts.o srm_printk.o
 
-obj-$(CONFIG_SMP) += dec_and_lock.o
+lib-$(CONFIG_SMP) += dec_and_lock.o
 
 # The division routines are built from single source, with different defines.
 AFLAGS___divqu.o = -DDIV

@@ -4,9 +4,7 @@
 # Copyright (C) 1995-2000 Russell King
 #
 
-L_TARGET	:= lib.a
-
-obj-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
+lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
 		   copy_page.o delay.o findbit.o memchr.o memcpy.o    \
 		   memset.o memzero.o setbit.o strncpy_from_user.o    \

@@ -14,17 +12,15 @@
 		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
 		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
 		   ucmpdi2.o udivdi3.o lib1funcs.o div64.o
-obj-m		:=
-obj-n		:=
 
-obj-arc		:= ecard.o io-acorn.o floppydma.o
-obj-rpc		:= ecard.o io-acorn.o floppydma.o
-obj-clps7500	:= io-acorn.o
-obj-l7200     	:= io-acorn.o
-obj-shark	:= io-shark.o
-obj-edb7211	:= io-acorn.o
+lib-arc		:= ecard.o io-acorn.o floppydma.o
+lib-rpc		:= ecard.o io-acorn.o floppydma.o
+lib-clps7500	:= io-acorn.o
+lib-l7200     	:= io-acorn.o
+lib-shark	:= io-shark.o
+lib-edb7211	:= io-acorn.o
 
-obj-y		+= $(obj-$(MACHINE))
+lib-y		+= $(lib-$(MACHINE))
 
 ifeq ($(CONFIG_CPU_32v3),y)
   v3		:= y

@@ -34,10 +30,10 @@
   v4		:= y
 endif
 
-obj-y		+= io-readsb.o io-writesb.o
-obj-$(v3)	+= io-readsw-armv3.o io-writesw-armv3.o io-readsl-armv3.o
-obj-$(v4)	+= io-readsw-armv4.o io-writesw-armv4.o io-readsl-armv4.o
-obj-y		+= io-writesl.o
+lib-y		+= io-readsb.o io-writesb.o
+lib-$(v3)	+= io-readsw-armv3.o io-writesw-armv3.o io-readsl-armv3.o
+lib-$(v4)	+= io-readsw-armv4.o io-writesw-armv4.o io-readsl-armv4.o
+lib-y		+= io-writesl.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S

@@ -2,8 +2,6 @@
 # Makefile for Etrax-specific library files..
 #
 
-L_TARGET = lib.a
-
 EXTRA_AFLAGS := -traditional
 
-obj-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o
+lib-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o

@@ -5,5 +5,4 @@
 .S.o:
 	$(CC) $(AFLAGS) -D__ASSEMBLY__ -c $< -o $@
 
-L_TARGET = lib.a
-obj-y  = ashrdi3.o checksum.o memcpy.o memset.o abs.o
+lib-y  = ashrdi3.o checksum.o memcpy.o memset.o abs.o

@@ -2,18 +2,16 @@
 # Makefile for ia64-specific library routines..
 #
 
-L_TARGET = lib.a
-
-obj-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
+lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o			\
 	checksum.o clear_page.o csum_partial_copy.o copy_page.o		\
 	clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o	\
 	flush.o io.o ip_fast_csum.o do_csum.o				\
 	memset.o strlen.o swiotlb.o
 
-obj-$(CONFIG_ITANIUM)	+= copy_page.o copy_user.o memcpy.o
-obj-$(CONFIG_MCKINLEY)	+= copy_page_mck.o memcpy_mck.o
-obj-$(CONFIG_PERFMON)	+= carta_random.o
+lib-$(CONFIG_ITANIUM)	+= copy_page.o copy_user.o memcpy.o
+lib-$(CONFIG_MCKINLEY)	+= copy_page_mck.o memcpy_mck.o
+lib-$(CONFIG_PERFMON)	+= carta_random.o
 
 IGNORE_FLAGS_OBJS =	__divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
 			__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o

@@ -2,9 +2,7 @@
 # Makefile for m68k-specific library files..
 #
 
-L_TARGET = lib.a
-
 EXTRA_AFLAGS := -traditional
 
-obj-y		:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
+lib-y		:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
 			checksum.o memcmp.o memcpy.o memset.o semaphore.o

@@ -2,7 +2,6 @@
 # Makefile for m68knommu specific library files..
 #
 
-L_TARGET = lib.a
-obj-y	:= ashldi3.o ashrdi3.o lshrdi3.o \
+lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o \
 	   muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
 	   checksum.o semaphore.o memcpy.o memset.o

@@ -3,9 +3,7 @@
 # under Linux.
 #
 
-L_TARGET = lib.a
-
-obj-y		+= console.o init.o memory.o tree.o env.o cmdline.o misc.o \
+lib-y		+= console.o init.o memory.o tree.o env.o cmdline.o misc.o \
 		   time.o file.o identify.o
 
-obj-$(CONFIG_ARC_CONSOLE)   += arc_con.o
+lib-$(CONFIG_ARC_CONSOLE)   += arc_con.o

@@ -2,6 +2,4 @@
 # Makefile for the Baget/MIPS prom emulator library routines.
 #
 
-L_TARGET := lib.a
-
-obj-y	:= init.o
+lib-y	:= init.o

@@ -3,9 +3,7 @@
 # under Linux.
 #
 
-L_TARGET := lib.a
-
-obj-y := init.o memory.o cmdline.o identify.o locore.o
+lib-y := init.o memory.o cmdline.o identify.o locore.o
 
 EXTRA_AFLAGS := $(CFLAGS)
 

@@ -2,21 +2,19 @@
 # Makefile for MIPS-specific library files..
 #
 
-L_TARGET = lib.a
-
 EXTRA_AFLAGS := $(CFLAGS)
 
-obj-y				+= csum_partial.o csum_partial_copy.o \
+lib-y				+= csum_partial.o csum_partial_copy.o \
 				   rtc-std.o rtc-no.o memcpy.o memset.o \
 				   watch.o strlen_user.o strncpy_user.o \
 				   strnlen_user.o
 
 ifdef CONFIG_CPU_R3000
-  obj-y	+= r3k_dump_tlb.o 
+  lib-y	+= r3k_dump_tlb.o 
 else
-  obj-y	+= dump_tlb.o 
+  lib-y	+= dump_tlb.o 
 endif
 
-obj-$(CONFIG_BLK_DEV_FD)	+= floppy-no.o floppy-std.o
-obj-$(CONFIG_IDE)		+= ide-std.o ide-no.o
-obj-$(CONFIG_PC_KEYB)		+= kbd-std.o kbd-no.o
+lib-$(CONFIG_BLK_DEV_FD)	+= floppy-no.o floppy-std.o
+lib-$(CONFIG_IDE)		+= ide-std.o ide-no.o
+lib-$(CONFIG_PC_KEYB)		+= kbd-std.o kbd-no.o

@@ -2,9 +2,8 @@
 # Makefile for the ARC prom monitor library routines under Linux.
 #
 
-L_TARGET = lib.a
-obj-y	:= console.o init.o identify.o tree.o env.o cmdline.o misc.o time.o \
+lib-y	:= console.o init.o identify.o tree.o env.o cmdline.o misc.o time.o \
 	   file.o
 
-obj-$(CONFIG_ARC_MEMORY) += memory.o
-obj-$(CONFIG_ARC_CONSOLE) += arc_con.o
+lib-$(CONFIG_ARC_MEMORY) += memory.o
+lib-$(CONFIG_ARC_CONSOLE) += arc_con.o

@@ -4,9 +4,7 @@
 
 EXTRA_AFLAGS := $(CFLAGS)
 
-L_TARGET = lib.a
-
-obj-y	+= csum_partial.o csum_partial_copy.o dump_tlb.o floppy-std.o \
+lib-y	+= csum_partial.o csum_partial_copy.o dump_tlb.o floppy-std.o \
 	  floppy-no.o ide-std.o ide-no.o kbd-std.o kbd-no.o rtc-std.o \
 	  rtc-no.o memset.o memcpy.o strlen_user.o strncpy_user.o \
 	  strnlen_user.o watch.o

@@ -5,7 +5,5 @@
 
 EXTRA_AFLAGS := $(CFLAGS)
 
-L_TARGET = lib.a
-
-obj-y	+= ip22-berr.o ip22-mc.o ip22-sc.o ip22-hpc.o ip22-int.o ip22-rtc.o \
+lib-y	+= ip22-berr.o ip22-mc.o ip22-sc.o ip22-hpc.o ip22-int.o ip22-rtc.o \
 	   ip22-setup.o system.o ip22-timer.o ip22-irq.o ip22-reset.o time.o

@@ -2,5 +2,4 @@
 # Makefile for parisc-specific library files
 #
 
-L_TARGET := lib.a
-obj-y	:= lusercopy.o bitops.o checksum.o io.o memset.o
+lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o

@@ -8,10 +8,8 @@
 # Tom Rini	January 2001
 #
 
-L_TARGET				:= lib.a
-
-obj-y					:= string.o util.o misc-common.o
-obj-$(CONFIG_PPC_PREP)			+= mpc10x_memory.o
-obj-$(CONFIG_LOPEC)			+= mpc10x_memory.o
-obj-$(CONFIG_PAL4)			+= cpc700_memory.o
-obj-$(CONFIG_SERIAL_8250_CONSOLE)	+= ns16550.o
+lib-y					:= string.o util.o misc-common.o
+lib-$(CONFIG_PPC_PREP)			+= mpc10x_memory.o
+lib-$(CONFIG_LOPEC)			+= mpc10x_memory.o
+lib-$(CONFIG_PAL4)			+= cpc700_memory.o
+lib-$(CONFIG_SERIAL_8250_CONSOLE)	+= ns16550.o

@@ -2,6 +2,4 @@
 # Makefile for some libs needed by zImage.
 #
 
-L_TARGET := lib.a
-
-obj-y := zlib.o div64.o
+lib-y := zlib.o div64.o

@@ -2,7 +2,5 @@
 # Makefile of1275 stuff
 #
 
-L_TARGET := lib.a
-
-obj-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o	\
+lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o	\
 	 ofstdio.o read.o release.o write.o

@@ -2,7 +2,5 @@
 # Makefile for ppc64-specific library files..
 #
 
-L_TARGET = lib.a
-
-obj-y := checksum.o dec_and_lock.o string.o strcase.o
-obj-y += copypage.o memcpy.o copyuser.o
+lib-y := checksum.o dec_and_lock.o string.o strcase.o
+lib-y += copypage.o memcpy.o copyuser.o

@@ -2,10 +2,8 @@
 # Makefile for s390-specific library files..
 #
 
-L_TARGET = lib.a
-
 EXTRA_AFLAGS := -traditional
 
-obj-y += delay.o 
-obj-$(CONFIG_ARCH_S390_31) += memset.o strcmp.o strncpy.o uaccess.o
-obj-$(CONFIG_ARCH_S390X) += memset64.o strcmp64.o strncpy64.o uaccess64.o
+lib-y += delay.o 
+lib-$(CONFIG_ARCH_S390_31) += memset.o strcmp.o strncpy.o uaccess.o
+lib-$(CONFIG_ARCH_S390X) += memset64.o strcmp64.o strncpy64.o uaccess64.o

@@ -2,6 +2,5 @@
 # Makefile for SuperH-specific library files..
 #
 
-L_TARGET = lib.a
-obj-y  = delay.o memcpy.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memcpy.o memset.o memmove.o memchr.o \
 	 checksum.o strcasecmp.o strlen.o

@@ -2,11 +2,9 @@
 # Makefile for Sparc library files..
 #
 
-L_TARGET = lib.a
-
 EXTRA_AFLAGS := -ansi -DST_DIV0=0x02
 
-obj-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \
+lib-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \
          strlen.o checksum.o blockops.o memscan.o memcmp.o strncmp.o \
 	 strncpy_from_user.o divdi3.o udivdi3.o strlen_user.o \
 	 copy_user.o locks.o atomic.o bitops.o debuglocks.o lshrdi3.o \

@@ -3,9 +3,7 @@
 # Linux.
 #
 
-L_TARGET = lib.a
-
-obj-y := bootstr.o devmap.o devops.o init.o memory.o misc.o mp.o \
+lib-y := bootstr.o devmap.o devops.o init.o memory.o misc.o mp.o \
 	 palloc.o ranges.o segment.o console.o printf.o tree.o
 
-obj-$(CONFIG_SUN4) += sun4prom.o
+lib-$(CONFIG_SUN4) += sun4prom.o

@@ -5,8 +5,7 @@
 EXTRA_AFLAGS := -ansi
 EXTRA_CFLAGS := -Werror
 
-L_TARGET = lib.a
-obj-y := PeeCeeI.o blockops.o debuglocks.o strlen.o strncmp.o \
+lib-y := PeeCeeI.o blockops.o debuglocks.o strlen.o strncmp.o \
 	 memscan.o strncpy_from_user.o strlen_user.o memcmp.o checksum.o \
 	 VIScopy.o VISbzero.o VISmemset.o VIScsum.o VIScsumcopy.o \
 	 VIScsumcopyusr.o VISsave.o atomic.o rwlock.o bitops.o \

@@ -6,6 +6,5 @@
 EXTRA_AFLAGS := -ansi
 EXTRA_CFLAGS := -Werror
 
-L_TARGET = lib.a
-obj-y   := bootstr.o devops.o init.o memory.o misc.o \
+lib-y   := bootstr.o devops.o init.o memory.o misc.o \
 	   tree.o console.o printf.o p1275.o map.o

@@ -2,6 +2,5 @@
 # arch/v850/lib/Makefile
 #
 
-L_TARGET = lib.a
-obj-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
+lib-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
 	 checksum.o memcpy.o memset.o

@@ -2,13 +2,12 @@
 # Makefile for x86_64-specific library files.
 #
 
-L_TARGET := lib.a
 CFLAGS_csum-partial.o := -funroll-loops
 
-obj-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
+lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
 	usercopy.o getuser.o putuser.o  \
 	thunk.o io.o clear_page.o copy_page.o bitstr.o
-obj-y += memcpy.o memmove.o memset.o copy_user.o
+lib-y += memcpy.o memmove.o memset.o copy_user.o
 
-obj-$(CONFIG_IO_DEBUG) += iodebug.o
-obj-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o
+lib-$(CONFIG_IO_DEBUG) += iodebug.o
+lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o