Skip to contentSkip to conversation

2.5.71 Frame Buffer Problem

DISCUSSION Zoup 3 participants 8 messages Jun 16, 2003 – Jun 18, 2003 1 message not in the archive

lore
Share & tools
lore

Zoup

author
#0 lore raw

Hi :)
I'm using Albatron Ti4200 graphic card and i can't get frame buffer working on VGA 788 or 790 , 2.5.71 config file attached .

Signature · 1 line
Wish You Were Here ...
#1 lore raw
Quoted 5 lines

Hi :)
I'm using Albatron Ti4200 graphic card and i can't get frame buffer working on VGA 788 or 790 , 2.5.71 config file attached .

Ugh. You have the vga16, vesa, and NVIDIA framebuffer drivers enabled. The NVIDIA driver might not work with your card. The VESA will so you should only enable that. Also you enabled both VGA console and frmaebuffer console. Please only enable framebuffer console.

author
#2 lore raw
Quoted 7 lines · James Simmons

Ugh. You have the vga16, vesa, and NVIDIA framebuffer drivers enabled. The NVIDIA driver might not work with your card. The VESA will so you should only enable that. Also you enabled both VGA console and frmaebuffer console. Please only enable framebuffer console.

-

i had compile kernel 2.5.71 with VESA support (disabled nvidia driver ) , on boot some lines and dotes dancing around the screen ! :)
now i have remove VESA support and VGA Console , there is no blank screen again but , i have seleted vga 791 ( 1025x768x256 ) and its working on 769 ( 640x486x256 ) , i dont know why ! :) i have tested many times , you know nvidia driver works under 2.4.* .
thanks

config file attached .

Signature · 1 line
Wish You Were Here ...
#3 lore raw
Quoted 3 lines

i had compile kernel 2.5.71 with VESA support (disabled nvidia driver ) , on boot some lines and dotes dancing around the screen ! :)

Hum. Like to see those bugs.

Quoted 5 lines

now i have remove VESA support and VGA Console , there is no blank screen again but , i have seleted vga 791 ( 1025x768x256 ) and its working on 769 ( 640x486x256 ) , i dont know why ! :) i have tested many times , you know nvidia driver works under 2.4.* .
thanks

vga=791 will not work for the rivafb driver. That is vesafb specific. You need to use modedb. See linux/Documentation/fb/modedb.txt.

P.S
I think the modedb code is broken for the NVIDIA driver. I haven't got
around to fixing that.

#4 lore raw
Quoted 3 lines · James Simmons
Quoted 2 lines

i had compile kernel 2.5.71 with VESA support (disabled nvidia driver ) , on boot some lines and dotes dancing around the screen ! :)

Hum. Like to see those bugs.

I've got similar problems on my matroxfb.

Signature · 4 lines
pozdr.  Paweł Gołaszewski 
---------------------------------
worth to see: http://www.againsttcpa.com/
CPU not found - software emulation...
#5 lore raw
Quoted 6 lines
Quoted 4 lines
Quoted 3 lines

i had compile kernel 2.5.71 with VESA support (disabled nvidia driver ) , on boot some lines and dotes dancing around the screen ! :)

Hum. Like to see those bugs.

I've got similar problems on my matroxfb.

Strange. I will see if I can duplicate this bug. Is the bug at boot time or is it present all the time?

#6 lore raw
Quoted 6 lines · James Simmons
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

i had compile kernel 2.5.71 with VESA support (disabled nvidia driver , on boot some lines and dotes dancing around the screen !

Hum. Like to see those bugs.

I've got similar problems on my matroxfb.

Strange. I will see if I can duplicate this bug. Is the bug at boot time or is it present all the time?

All the time.

Everything looks fine at the beginning, but running i.e. 'top' causes the console is unreadable. I can make it readable for a while with simple switch between consoles.

I don't know if I described it ok - the best would be short *.avi of that, but I don't have any camera...

Signature · 4 lines
pozdr.  Paweł Gołaszewski 
---------------------------------
worth to see: http://www.againsttcpa.com/
CPU not found - software emulation...

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#8 lore raw
Quoted 8 lines · Paweł Gołaszewski
Quoted 4 lines · James Simmons
Quoted 2 lines

i had compile kernel 2.5.71 with VESA support (disabled nvidia driver ) , on boot some lines and dotes dancing around the screen ! :)

Hum. Like to see those bugs.

I've got similar problems on my matroxfb.

Also i have problem with my SavageIX on my laptop ( pavilion n5310 ) , so Geforce ti 4200 , MatroxFB and savageIX had problem with frame buffer .

Signature · 1 line
Wish You Were Here ...