VX222 documentation change
Hi!
The documentation for the VX222 is incomplete.
I had problems bringing a VX222/v2 to run, but Takashi Iwai & Jaroslav Kysela gave me the solution. It should be added to the documentation.
Just before "Now insert the modules into the kernel space.", add :
| One of the alsa-tools must be installed to upload the firmware to the | card, initialize it and create the devices. | Download, unzip and install the vxloader part of the alsa-tools package: | | tar xjf alsa-tools-x.y.z | cd alsa-driver-x.y.z/vxloader | ./configure ; make ; make install
Then, just before "Now adjust your soundcards volume levels...", add :
| Now initialize the card:
| vxloader
Finally, in the section "Setting up modprobe and kmod support", add the following after "alias sound-service-0-12 snd-pcm-oss" :
| | # Upload firmware of all digigram cards | post-install snd-vx222 /usr/local/bin/vxloader | | Note: If you are using devfs, add the following instead: | alias /dev/mixer snd-mixer-oss | alias /dev/dsp snd-pcm-oss | | # Upload firmware of card #1 | post-install snd-vx222 /usr/local/bin/vxloader -c 0
Cheers!
--
Christophe Greisberger
-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php