acpi4asus CVS updated
Hi,
I've just added support for ASUS M3700N and S1300N laptops. This includes display switching code, which *should* work, but the same what was with L3800C applies to those also: once the module is loaded, Fn+F8 cedes working. This is a feature of the DSDT, not a bug in the driver, the only way to switch displays would then be to echo an appropriate value into /proc/acpi/asus/disp.
The CVS is at http://sourceforge.net/projects/acpi4asus, but since the CVS-view doesn't currently relfect the current status of repository, I've made a patch to bring the kernel sources up to date (be careful, -p3 may be needed when patching), grab it at http:/hell.org.pl/~sziwan/asus/asus_core.c-1.51-to-1.55.diff
Please test it ASAP.
Best regards,
Signature · 9 lines
Karol 'sziwan' Kozimor sziwan-DETuoxkZsSqrDJvtcaxF/[email protected] ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
Am Mit, 2003-07-16 um 23.09 schrieb Karol Kozimor:
Quoted 1 line
Hi,
Hi!
Quoted 6 lines
I've just added support for ASUS M3700N and S1300N laptops. This includes display switching code, which *should* work, but the same what was with L3800C applies to those also: once the module is loaded, Fn+F8 cedes working. This is a feature of the DSDT, not a bug in the driver, the only way to switch displays would then be to echo an appropriate value into
/proc/acpi/asus/disp.
Hiw is disp coded, i.e. which value activates/deactivates which "head"? I suspect that it is binary and that bit-0 is the LCD, correct? What are the others?
Which is the highest bit?
I ask because it should be quite easy to fix the hotkey problem by simply adding a acpid script for it, simply counting up and flipping back to bit-0. The hotkey event seems to be ATKD 00000061.
Quoted 5 lines
The CVS is at http://sourceforge.net/projects/acpi4asus, but since the CVS-view doesn't currently relfect the current status of repository, I've made a patch to bring the kernel sources up to date (be careful, -p3 may be needed when patching), grab it at http:/hell.org.pl/~sziwan/asus/asus_core.c-1.51-to-1.55.diff
Does not apply to the version in last ACPI patch (030619); but doesn't matter since one can use the complete source from sf.net anyway.
Many many thanks to you and the others to make this working!
Quoted 2 lines
Please test it ASAP.
Best regards,
CU
nils faerber
Signature · 12 lines
kernel concepts Tel: +49-271-771091-12 Dreisbachstr. 24 Fax: +49-271-771091-19 D-57250 Netphen D1 : +49-170-2729106 -- ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
Thus wrote Nils Faerber:
Quoted 4 lines
Hiw is disp coded, i.e. which value activates/deactivates which "head"? I suspect that it is binary and that bit-0 is the LCD, correct? What are the others?
Which is the highest bit?
This in covered both in the README, and in the comments. Anyway, bit 0 is LCD, 1 is CRT and 2 is TV-Out (the latter two may be swapped, I can't remember that now, please consult either the README or the sources).
Quoted 3 lines
I ask because it should be quite easy to fix the hotkey problem by simply adding a acpid script for it, simply counting up and flipping back to bit-0. The hotkey event seems to be ATKD 00000061.
Just pass the notification value NAND 0x60. The hotkey event is the desired value OR'ed 0x60, FYI. The AML code does the necessary switching and display detection, thus it only works when the other displays are actually connected.
Quoted 2 lines
Does not apply to the version in last ACPI patch (030619); but doesn't matter since one can use the complete source from sf.net anyway.
Just copying the asus_core.c onto asus_acpi.c should be enough. The patch comes from cvs rdiff, and I didn't have time to test it. BTW: the M3N prefix should really have the dot at the end, as Julien noted. The updated patch on my site reflects this.
Quoted 1 line
Many many thanks to you and the others to make this working!
Actually, if you refer to the display switching, it has been working and has been present in the code for at least a month or so. At least for L3C and the like, for others, there are some problems that Julien tried to deal with, unsuccessfully so far.
Best regards,
Signature · 9 lines
Karol 'sziwan' Kozimor sziwan-DETuoxkZsSqrDJvtcaxF/[email protected] ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0