2.6.0-test1 fails at insmoding orinoco_cs
I just gave a try to 2.6.0-test1, all is fine except there's an IRQ conflict occuring when modprobing my wireless card's driver:
Jul 19 20:53:37 femto kernel: Linux Kernel Card Services 3.1.22 Jul 19 20:53:37 femto kernel: options: [pci] [cardbus] [pm] Jul 19 20:53:37 femto kernel: PCI: Found IRQ 11 for device 0000:00:0b.0 Jul 19 20:53:37 femto kernel: Yenta IRQ list 06b0, PCI irq11 Jul 19 20:53:37 femto kernel: Socket status: 30000411 Jul 19 20:53:37 femto kernel: PCI: Found IRQ 11 for device 0000:00:0b.1 Jul 19 20:53:37 femto kernel: Yenta IRQ list 06b0, PCI irq11 Jul 19 20:53:37 femto kernel: Socket status: 30000087 Jul 19 20:53:38 femto kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xf0000-0xfffff Jul 19 20:53:38 femto kernel: orinoco_cs: RequestIRQ: Resource in use
It's the same driver I used with 2.4.21 and it worked fine. Is this a bug ? I'm not a kernel guru... If you need help to debug, lemme know.
Please CC me on reply.
Signature · 2 lines
Eric VAN BUGGENHAUT [email protected]
Quoted 2 lines · Eric Van Buggenhaut
It's the same driver I used with 2.4.21 and it worked fine. Is this a bug ? I'm not a kernel guru... If you need help to debug, lemme know.
Happily using the version shipped with 2.6.0-test1 here.
Jul 19 15:40:47 revox kernel: Linux Kernel Card Services 3.1.22 Jul 19 15:40:47 revox kernel: options: [pci] [cardbus] [pm] Jul 19 15:40:47 revox kernel: PCI: Found IRQ 11 for device 0000:02:01.0 Jul 19 15:40:47 revox kernel: PCI: Sharing IRQ 11 with 0000:02:01.1 Jul 19 15:40:47 revox kernel: Yenta IRQ list 06b8, PCI irq11 Jul 19 15:40:47 revox kernel: Socket status: 30000006 Jul 19 15:40:47 revox kernel: PCI: Found IRQ 11 for device 0000:02:01.1 Jul 19 15:40:47 revox kernel: PCI: Sharing IRQ 11 with 0000:02:01.0 Jul 19 15:40:47 revox kernel: Yenta IRQ list 06b8, PCI irq11 Jul 19 15:40:47 revox kernel: Socket status: 30000010 Jul 19 15:40:48 revox cardmgr[396]: watching 2 sockets Jul 19 15:40:48 revox cardmgr[397]: starting, version is 3.2.2 Jul 19 15:40:48 revox cardmgr[397]: socket 1: NetGear MA401RA Jul 19 15:40:48 revox kernel: cs: IO port probe 0x0c00-0x0cff: clean. Jul 19 15:40:48 revox kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x817 0x828-0x837 0x 840-0x857 0x860-0x877 0x880-0x88f 0x898-0x89f 0x8a8-0x8cf 0x8e0-0x8ff Jul 19 15:40:48 revox kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x 4d0-0x4d7 Jul 19 15:40:48 revox kernel: cs: IO port probe 0x0a00-0x0aff: clean. Jul 19 15:40:48 revox kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jul 19 15:40:48 revox cardmgr[397]: executing: 'modprobe orinoco_cs' Jul 19 15:40:48 revox kernel: orinoco.c 0.13e (David Gibson <[email protected]> and othe rs) Jul 19 15:40:48 revox kernel: orinoco_cs.c 0.13e (David Gibson <[email protected]> and o thers) Jul 19 15:40:48 revox kernel: eth1: Station identity xxxx:xxxx:xxxx:xxxx Jul 19 15:40:48 revox kernel: eth1: Looks like an Intersil firmware version 1.3.6 Jul 19 15:40:48 revox kernel: eth1: Ad-hoc demo mode supported Jul 19 15:40:48 revox kernel: eth1: IEEE standard IBSS ad-hoc mode supported Jul 19 15:40:48 revox kernel: eth1: WEP supported, 104-bit key Jul 19 15:40:48 revox kernel: eth1: MAC address xx:xx:xx:xx:xx:xx Jul 19 15:40:48 revox kernel: eth1: Station name "Prism I" Jul 19 15:40:48 revox kernel: eth1: ready Jul 19 15:40:48 revox kernel: eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f