Skip to contentSkip to conversation

PPTP connection tracker

DISCUSSION Harald Welte 1 participant 2 messages Jul 25, 2003 – Jul 26, 2003 2 messages not in the archive netfilter

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 6 lines · Joshua Jackson

Greetings,

Just curious if you have had any feedback on the PPTP connection tracking code in the 20030107 patch-o-matic. I implemented it in a firewall product of mine for a while and had numerous complaints that all PPTP connectivity through the firewall was broken.

without a verbose description about the exact problem, I cannot debug the problem. I need to know

- client and server OS/version
- information about the network
- configuration of the PPTP-related ruleset
- log of erroneously dropped packets (if any)
- behaviour of expectations and GRE entries in /proc/net/ip_conntrack while session was established
- probably also packet dumps/traces (tcpdump, ethereal) needed.

Quoted 2 lines

I have removed the code from the kernel for now, but still get a lot of complaints about only being able to use a single PPTP session.

of course, since you cannot support more than one session without the PPTP helper.

Quoted 2 lines

If there have been any updates to this code, is there a place I can download it?

yes, check out patch-o-matic from CVS, or go to
http://netfilter.org/documentation/pomlist/pom-extra.html#pptp-conntrack-nat

Quoted 3 lines

Joshua Jackson
Vortech Consulting
http://www.vortech.net

Signature · 3 lines
- Harald Welte <[email protected]>               http://www.gnumonks.org/
============================================================================
Programming is like sex: One mistake and you have to support it your lifetime
#3 lore raw
In reply to a message not in the archive
Quoted 2 lines · Joshua Jackson

While I can sympathize with the "it must be your problem" response, you didn't actually answer the question...

I did not mean to imply that it is your problem. I was meaning: Please provide me with more information so I can debug it.

Quoted 6 lines

I was just curious if you had any feedback about it not working and if it was a known problem with the Jan 07 POM. If ANYONE has gotten it working, then I would know that it was something I needed to debug myself. I have a whole lot of other patches, many of which are network related, that go into the Wolverine kernel and just want to confirm wether the module is known to work or not.

Astaro Inc. (http://www.astaro.com/) is shipping the code in patch-o-matic CVS to thousands of customers. Only very occasionally, I get problem reports.

Quoted 1 line

-The server version is Wolverine v1.1 from http://www.coyotelinux.com.

So it's poptop.

Quoted 9 lines

-Nobody has submitted a log/conntrack output to me as the solution most of them took was to simply unload the PPTP connection tracker so they could at least get a single connection

If the POM code is known to work, I will probably work a little more at debugging it, otherwise I will focus on the CVS code. If all else fails will try to round up some log/packet dumps to send you. This is a commercial product and getting customers to modify and bring down production firewalls is roughly equivalent to asking them to pull out a tooth and send it to me.

To be honest, I don't remember about the bugs/status/issues of the version contained in a version from more than six months ago.

Well, if you cannot reproduce yourself it in some known setup/scenario, I doubt I can start reproducing it at my site.

Quoted 6 lines
Quoted 1 line

- probably also packet dumps/traces (tcpdump, ethereal) needed.

tcpdump, maybe... it is an embedded application that is typically installed onto small flash drives - not a whole lot of flexibility for utility installations and space for packet dumps. If need be I'll see if I can find someone with it installed in a hard drive that is having the problems.

I'm sorry, but you sound a bit like a customer who has bought a certain product with guaranteed features that are now not fullfilled. Please be aware there is a reason the code in patch-o-matic is in the 'extra' repository, marked as status 'Beta' and still receives updates.

Quoted 2 lines

As for the CVS POM, the web interface lists the pptp-conntrack stuff as predating the 01/07 release,

Where did you get that information from?
http://cvs.netfilter.org/netfilter/patch-o-matic/extra/pptp-conntrack-nat.patch
lists the changelog, and clearly indicates that pom-20030107 contains version 1.11, whereas CVS contains version 1.12

Quoted 4 lines

grabbed the /netfilter-extensions/helpers/pptp/ stuff and manually wedged it into 2.4.21, but can not push that out to production customers until I have done enough testing to be certain I didn't break anything else in the netfilter code during the process.

sure. But in order to know if your particular bug/problem was solved, you would need a known-to-fail-with-the-old-code setup against which you can verify.

Quoted 3 lines

Joshua Jackson
Vortech Consulting
http://www.vortech.net

Signature · 3 lines
- Harald Welte <[email protected]>               http://www.gnumonks.org/
============================================================================
Programming is like sex: One mistake and you have to support it your lifetime