hdparm IDE sleep mode
hi,
man hdparm says:
"-Y
Force an IDE drive to immediately enter the lowest power con- sumption sleep mode, causing it to shut down completely. A hard or soft reset is required before the drive can be accessed again (the Linux IDE driver will automatically handle issuing a reset if/when needed)."
but when i put my hdd in "sleep mode" (not suspend, that works fine) it shuts dowm properly but can not be woken up again... when shutting down the system, it hangs waiting for the hdds to come up again, but they never do...
i'm using kernel 2.4.20, IDE drives on a debian testing system. any suggestions why the ide driver does not soft-reset the drives as implied in the hdparm man-page?
Johannes
Quoted 7 lines · Johannes Ahlmann
"-Y
Force an IDE drive to immediately enter the lowest power con- sumption sleep mode, causing it to shut down completely. A hard or soft reset is required before the drive can be accessed again (the Linux IDE driver will automatically handle issuing a reset if/when needed)."
Quoted 7 lines
but when i put my hdd in "sleep mode" (not suspend, that works fine) it shuts dowm properly but can not be woken up again... when shutting down the system, it hangs waiting for the hdds to come up again, but they never do...
i'm using kernel 2.4.20, IDE drives on a debian testing system. any suggestions why the ide driver does not soft-reset the drives as implied in the hdparm man-page?
Is "never" longer than two minutes? How long have you waited? Does 2.4.21 work?
Signature · 1 line
Matthias Andree