interlace and doublescan modes support for tdfxfb in 2.6
PATCH 1/1 interlace and doublescan modes support for tdfxfb in 2.6
Like the second tdfxfb patch I've posted a while ago - it was posted to linux-fbdev-devel few days ago, but I haven't got any feedback...
It works on my Voodoo4 4500 and shouldn't cause any problems on other Voodoos - it's just a port of changes between 2.4.20 and 2.4.21.
----- Forwarded message from Jakub Bogusz <qboosh at pld-linux.org> -----
Date: Sun, 10 Aug 2003 01:24:55 +0200
From: Jakub Bogusz <qboosh at pld-linux.org>
To: linux-fbdev-devel at lists.sourceforge.net
Subject: [PATCH] interlace and doublescan modes support for tdfxfb in 2.6
Hello,
this patch adds interlace and doublescan modes support to tdfxfb in 2.6 (it's a port of changes already incorporated into 2.4.21).
[...]
Signature · 2 lines
Jakub Bogusz http://cyber.cs.net.pl/~qboosh/ PLD Linux http://www.pld-linux.org/
This patch adds interlace and double-scan mode support to tdfxfb in 2.6. It's a port of my changes (incorporated into 2.4.21) to Linux 2.6.
-- Jakub Bogusz <[email protected]>
include/video/tdfx.h renamed from include/video/tdfx.h.orig +1 -0
@@ -114,6 +114,7 @@#define VGAINIT1_MASK 0x1fffff#define VIDCFG_VIDPROC_ENABLE BIT(0)#define VIDCFG_CURS_X11 BIT(1) +#define VIDCFG_INTERLACE BIT(3)#define VIDCFG_HALF_MODE BIT(4)#define VIDCFG_DESK_ENABLE BIT(7)#define VIDCFG_CLUT_BYPASS BIT(10)
drivers/video/tdfxfb.c renamed from drivers/video/tdfxfb.c.orig +25 -8
@@ -508,8 +508,10 @@return -EINVAL ; } -/* fixme: does Voodoo3 support interlace? Banshee doesn't */ -if ((var->vmode &FB_VMODE_MASK ) ==FB_VMODE_INTERLACED ) { +/* Banshee doesn't support interlace, but Voodoo4/5 and probably Voodoo3 do. */ +/* no direct information about device id now? use max_pixclock for this... */ +if (((var->vmode &FB_VMODE_MASK ) ==FB_VMODE_INTERLACED ) && + (par->max_pixclock <VOODOO3_MAX_PIXCLOCK )) {DPRINTK ("interlace not supported\n" );return -EINVAL ; }
@@ -616,10 +618,17 @@ hbs = hd; hbe = ht; - vbs = vd = info->var.yres -1 ; - vs = vd + info->var.lower_margin; - ve = vs + info->var.vsync_len; - vbe = vt = ve + info->var.upper_margin -1 ; +if ((info->var.vmode &FB_VMODE_MASK ) ==FB_VMODE_DOUBLE ) { + vbs = vd = (info->var.yres <<1 ) -1 ; + vs = vd + (info->var.lower_margin <<1 ); + ve = vs + (info->var.vsync_len <<1 ); + vbe = vt = ve + (info->var.upper_margin <<1 ) -1 ; + }else { + vbs = vd = info->var.yres -1 ; + vs = vd + info->var.lower_margin; + ve = vs + info->var.vsync_len; + vbe = vt = ve + info->var.upper_margin -1 ; + }/* this is all pretty standard VGA register stuffing */ reg.misc[0x00] = 0x0f |
@@ -742,8 +751,16 @@ reg.gfxpll = do_calc_pll(..., &fout);#endif - reg.screensize = info->var.xres | (info->var.yres <<12 ); - reg.vidcfg &= ~VIDCFG_HALF_MODE ; +if ((info->var.vmode &FB_VMODE_MASK ) ==FB_VMODE_DOUBLE ) { + reg.screensize = info->var.xres | (info->var.yres <<13 ); + reg.vidcfg |=VIDCFG_HALF_MODE ; + reg.crt[0x09 ] |=0x80 ; + }else { + reg.screensize = info->var.xres | (info->var.yres <<12 ); + reg.vidcfg &= ~VIDCFG_HALF_MODE ; + } +if ((info->var.vmode &FB_VMODE_MASK ) ==FB_VMODE_INTERLACED ) + reg.vidcfg |=VIDCFG_INTERLACE ; reg.miscinit0 =tdfx_inl (par,MISCINIT0 );#if defined(__BIG_ENDIAN)
Applying patch. It will be in the next code drop.
Quoted 22 lines · Jakub Bogusz
Like the second tdfxfb patch I've posted a while ago - it was posted to linux-fbdev-devel few days ago, but I haven't got any feedback...
It works on my Voodoo4 4500 and shouldn't cause any problems on other Voodoos - it's just a port of changes between 2.4.20 and 2.4.21.
----- Forwarded message from Jakub Bogusz <qboosh at pld-linux.org> -----
Date: Sun, 10 Aug 2003 01:24:55 +0200
From: Jakub Bogusz <qboosh at pld-linux.org>
To: linux-fbdev-devel at lists.sourceforge.net
Subject: [PATCH] interlace and doublescan modes support for tdfxfb in 2.6Hello,
this patch adds interlace and doublescan modes support to tdfxfb in 2.6 (it's a port of changes already incorporated into 2.4.21).
[...]