DVD ROM on 2.6
I'm trying out 2.6 on one of my test boxes with an IDE dvd drive. I'm using ide-scsi (I prefer scdx as opposed to hdx). I noticed that any attempt to mount a DVD movie (lord of the rings comes to mind) it mounts as UDF. My laptop mounts this same dvd as iso9660.
I've also been unable to play DVDs on this machine, but I don't have the same packages installed as I do on my laptop.
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 2 lines
Try passing the -t iso9660 option to mount or (if that doesn't work) you could go so far as to removing the UDF support from the kernel.
I had a brain fart. I was using -o instead of -t =(
I do have DVDs playing now on 2.6.0-test3. I used ide-cd instead of ide-scsi. apparently the scsi layer didn't like it. Buffer I/O error on device sr1, logical block 7651
Buffer I/O error on device sr1, logical block 7652
Buffer I/O error on device sr1, logical block 7653end_request: I/O error, dev sr1, sector 660400
I would get tons of Buffer I/O errors and some end_requests like the above
Quoted 7 lines
Quoted 7 lines
I'm trying out 2.6 on one of my test boxes with an IDE dvd drive. I'm using ide-scsi (I prefer scdx as opposed to hdx). I noticed that any attempt to mount a DVD movie (lord of the rings comes to mind) it mounts as UDF. My laptop mounts this same dvd as iso9660.
I've also been unable to play DVDs on this machine, but I don't have the same packages installed as I do on my laptop.
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Quoted 6 lines · Wakko Warner
Quoted 3 lines
Try passing the -t iso9660 option to mount or (if that doesn't work) you could go so far as to removing the UDF support from the kernel.
I had a brain fart. I was using -o instead of -t =(
Quoted 10 lines
I do have DVDs playing now on 2.6.0-test3. I used ide-cd instead of ide-scsi. apparently the scsi layer didn't like it. Buffer I/O error on device sr1, logical block 7651
Buffer I/O error on device sr1, logical block 7652
Buffer I/O error on device sr1, logical block 7653end_request: I/O error, dev sr1, sector 660400I would get tons of Buffer I/O errors and some
end_requestslike the above
I thought ide-scsi was broken?
--
Christian Axelsson
[email protected]
Quoted 10 lines
Quoted 9 lines
I do have DVDs playing now on 2.6.0-test3. I used ide-cd instead of ide-scsi. apparently the scsi layer didn't like it. Buffer I/O error on device sr1, logical block 7651
Buffer I/O error on device sr1, logical block 7652
Buffer I/O error on device sr1, logical block 7653end_request: I/O error, dev sr1, sector 660400I would get tons of Buffer I/O errors and some
end_requestslike the aboveI thought ide-scsi was broken?
I can't tell if this is in the ide-scsi driver or the scsi cdrom driver. I still personally wish that the ide drivers were modules of scsi instead of being a seperate block device. USB storage creates scsi adapters, ide-scsi allows ATAPI access via scsi. Why not do this for ide in general (if that starts a flame war, please don't contribute =)
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
In article <[email protected]>,
Wakko Warner <[email protected]> wrote:
| > >I do have DVDs playing now on 2.6.0-test3. I used ide-cd instead of | > >ide-scsi. apparently the scsi layer didn't like it. | > >Buffer I/O error on device sr1, logical block 7651 | > >Buffer I/O error on device sr1, logical block 7652 | > >Buffer I/O error on device sr1, logical block 7653 | > >end_request: I/O error, dev sr1, sector 660400 | > > | > >I would get tons of Buffer I/O errors and some end_requests like the above | > > | > I thought ide-scsi was broken? | | I can't tell if this is in the ide-scsi driver or the scsi cdrom driver. I | still personally wish that the ide drivers were modules of scsi instead of | being a seperate block device. USB storage creates scsi adapters, ide-scsi | allows ATAPI access via scsi. Why not do this for ide in general (if that | starts a flame war, please don't contribute =)
Probably because IDE and ATAPI are not the same thing. There are devices which electrically connect to the IDE bus which don't speak ATAPI.
Signature · 3 lines
bill davidsen <[email protected]> CTO, TMR Associates, Inc Doing interesting things with little computers since 1979.