Skip to contentSkip to conversation

Problems with a PCM driver

DISCUSSION Adrian McMenamin 3 participants 6 messages Aug 30, 2003 – Aug 31, 2003

lore
Share & tools
lore
#0 lore raw

I am writing a PCM driver for the AICA device on the Sega Dreamcast for a 2.6.0-testX kernel.

The driver is far from complete, but I am having various problems when I test bits of it...

A simple write of a file gives me this...

/dev/snd # cat /test.txt > pcmC0D0p
ALSA sound/sh/aica.c:165: In snd_aica_playback_open ALSA sound/sh/aica.c:80: Disabling AICA device ALSA sound/sh/aica.c:66: Enabling AICA device
cat: write: File descriptor in bad state

The three snd_printk messages are just what I would expect but I am not sure why I get the message about the file descriptor.

Here is the open function...

static int snd_aica_playback_open(snd_pcm_substream_t *subs)

{
	snd_printk("In snd_aica_playback_open \n");
	snd_aica_pcm_t *aica_chip = snd_pcm_substream_chip(subs);
	snd_pcm_runtime_t *runtime = subs->runtime;
	runtime->hw = snd_aica_playback_hw;


	/*setup the aica spu*/
	
	spu_disable();
	spu_memset(0, 0, 0x31000);
	spu_memload(0, bin_arm7, sizeof(bin_arm7));
	spu_enable();

	
	return 0;
}

The device doesn't support dma (or rather nobody has yet successful reversed the DMA mechanism) and so I am using the methods that worked when I wrote the OSS driver for the 2.4 kernels.

snd_aica_playback_hw is...

static snd_pcm_hardware_t snd_aica_playback_hw = {
.info = SNDRV_PCM_INFO_INTERLEAVED|SNDRV_PCM_INFO_NONINTERLEAVED, .formats = SNDRV_PCM_FORMAT_S8 | SNDRV_PCM_FORMAT_U8 |
SNDRV_PCM_FORMAT_S16_LE | SNDRV_PCM_FORMAT_IMA_ADPCM,

	.rates = SNDRV_PCM_RATE_8000_44100,
	.rate_min = 8000,
	.rate_max = 44100,
	.channels_min = 1,
	.channels_max = 2,
	.buffer_bytes_max = 32768,
	.period_bytes_min = 8192,
	.period_bytes_max = 32768,
	.periods_min = 1,
	.periods_max = 4
};

Anybody able to give me a few pointers as to what is going wrong?

Thanks

Adrian

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw
Quoted 6 lines · Adrian McMenamin

I am writing a PCM driver for the AICA device on the Sega Dreamcast for a 2.6.0-testX kernel.

The driver is far from complete, but I am having various problems when I test bits of it...

A simple write of a file gives me this...

Quoted 8 lines

/dev/snd # cat /test.txt > pcmC0D0p
ALSA sound/sh/aica.c:165: In snd_aica_playback_open ALSA sound/sh/aica.c:80: Disabling AICA device ALSA sound/sh/aica.c:66: Enabling AICA device
cat: write: File descriptor in bad state

The three snd_printk messages are just what I would expect but I am not sure why I get the message about the file descriptor.

Why don't you do instead: -
aplay test.txt

I don't think you can write to pcmC0D0p directly, you have to go via the alsa-lib.

Cheers
James

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 15 lines · James Courtier-Dutton
Quoted 14 lines · Adrian McMenamin

I am writing a PCM driver for the AICA device on the Sega Dreamcast for a 2.6.0-testX kernel.

The driver is far from complete, but I am having various problems when I test bits of it...

A simple write of a file gives me this...

/dev/snd # cat /test.txt > pcmC0D0p
ALSA sound/sh/aica.c:165: In snd_aica_playback_open ALSA sound/sh/aica.c:80: Disabling AICA device ALSA sound/sh/aica.c:66: Enabling AICA device
cat: write: File descriptor in bad state

Quoted 6 lines
Quoted 2 lines

The three snd_printk messages are just what I would expect but I am not sure why I get the message about the file descriptor.

Why don't you do instead: -
aplay test.txt

Is aplay a system call?

All I get is this...

/dev/snd # aplay /test.txt
aplay: No such file or directory

Incidentally, the mini-HOWTO on the site says this:

Now you are ready to put any soundfile you want into the PCM device of the first card. So try to cat any textfile (any file) to /dev/snd/pcmC0D0, like
this: cat <filename> > /dev/snd/pcmC0D0.

Thanks for the help anyway :)

Adrian

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw
Quoted 33 lines · Adrian McMenamin
Quoted 16 lines · James Courtier-Dutton
Quoted 14 lines · Adrian McMenamin

I am writing a PCM driver for the AICA device on the Sega Dreamcast for a 2.6.0-testX kernel.

The driver is far from complete, but I am having various problems when I test bits of it...

A simple write of a file gives me this...

/dev/snd # cat /test.txt > pcmC0D0p
ALSA sound/sh/aica.c:165: In snd_aica_playback_open ALSA sound/sh/aica.c:80: Disabling AICA device ALSA sound/sh/aica.c:66: Enabling AICA device
cat: write: File descriptor in bad state

Quoted 6 lines
Quoted 2 lines

The three snd_printk messages are just what I would expect but I am not sure why I get the message about the file descriptor.

Why don't you do instead: -
aplay test.txt

Is aplay a system call?

All I get is this...

/dev/snd # aplay /test.txt
aplay: No such file or directory

Quoted 9 lines

Incidentally, the mini-HOWTO on the site says this:

Now you are ready to put any soundfile you want into the PCM device of the first card. So try to cat any textfile (any file) to /dev/snd/pcmC0D0, like this: cat <filename> > /dev/snd/pcmC0D0.

Thanks for the help anyway :)

Adrian

Have you installed alsa correctly?
alsa-driver, (Kernel modules like the one you are developing) alsa-lib, (the alsa api.)
alsa-utils, (the one with aplay in it.)
alsa-tools (other useful tools.)
alsa-oss (if you want oss emulation in userland.)

Cheers
James

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw
Quoted 39 lines · James Courtier-Dutton
Quoted 38 lines · Adrian McMenamin
Quoted 15 lines · James Courtier-Dutton
Quoted 14 lines · Adrian McMenamin

I am writing a PCM driver for the AICA device on the Sega Dreamcast for a 2.6.0-testX kernel.

The driver is far from complete, but I am having various problems when I test bits of it...

A simple write of a file gives me this...

/dev/snd # cat /test.txt > pcmC0D0p
ALSA sound/sh/aica.c:165: In snd_aica_playback_open ALSA sound/sh/aica.c:80: Disabling AICA device ALSA sound/sh/aica.c:66: Enabling AICA device
cat: write: File descriptor in bad state

Quoted 5 lines
Quoted 2 lines

The three snd_printk messages are just what I would expect but I am not sure why I get the message about the file descriptor.

Why don't you do instead: -
aplay test.txt

Is aplay a system call?

All I get is this...

/dev/snd # aplay /test.txt
aplay: No such file or directory

Incidentally, the mini-HOWTO on the site says this:

Now you are ready to put any soundfile you want into the PCM device of the first card. So try to cat any textfile (any file) to /dev/snd/pcmC0D0, like this: cat <filename> > /dev/snd/pcmC0D0.

Thanks for the help anyway :)

Quoted 9 lines
Quoted 1 line

Adrian

Have you installed alsa correctly?
alsa-driver, (Kernel modules like the one you are developing) alsa-lib, (the alsa api.)
alsa-utils, (the one with aplay in it.)
alsa-tools (other useful tools.)
alsa-oss (if you want oss emulation in userland.)

Errr, no. I suppose that might have something to do with it :)

To be frank, the site doesn't exactly make it particularly clear this is what you need to do - though I suppose I could always have asked :p

Thanks

Adrian

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#5 lore raw
In reply to Adrian McMenamin
Quoted 6 lines · Adrian McMenamin

I am writing a PCM driver for the AICA device on the Sega Dreamcast for a 2.6.0-testX kernel.

The driver is far from complete, but I am having various problems when I test bits of it...

Quoted 7 lines

A simple write of a file gives me this...

/dev/snd # cat /test.txt > pcmC0D0p
ALSA sound/sh/aica.c:165: In snd_aica_playback_open ALSA sound/sh/aica.c:80: Disabling AICA device ALSA sound/sh/aica.c:66: Enabling AICA device
cat: write: File descriptor in bad state

Use the aplay utility. The native devices need a special initialization using ioctl.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf