Skip to contentSkip to conversation

Equivalent of 'insmod -m' on 2.6?

DISCUSSION Ravi Krishnamurthy 2 participants 2 messages Sep 10, 2003 – Sep 11, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I am trying to debug a module on 2.6.0-test3 with module-init-tools-0.9.12. But I am not able to get the load map of the module being loaded. 'insmod' in module-init-tools does not support the '-m' option. While working on 2.4, the load map given by 'insmod -m' was very useful for debugging modules. Is there an equivalent for 2.5/2.6 kernels?
Even the new 'struct module' does not seem to contain all the section and relocation information.

Please CC me on the replies since I am not subscribed to the list.

Thanks in advance for any help.

-Ravi.

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

#1 lore raw

In message <[email protected]> you write:

Quoted 6 lines

Hi,

I am trying to debug a module on 2.6.0-test3 with module-init-tools-0.9.12. But I am not able to get the load map of the module being loaded. 'insmod' in module-init-tools does not support the '-m' option.

Hi Ravi!

CONFIG_KALLSYMS is probably what you want here, along with
/proc/kallsyms. You can, also generate the equivalent of insmod -m from the output of /proc/modules and the symbol table in the module.

BTW, I'd generally recommend modprobe over insmod: as you will have noticed, the new insmod is designed to be a really low-level tool.

Hope this helps,
Rusty.
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.