Skip to contentSkip to conversation

SII SATA request size limit

DISCUSSION Marcelo Penna Guerra 2 participants 2 messages Sep 12, 2003 – Sep 13, 2003

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Witold Krecicki escreveu:

Quoted 3 lines

I've lost some of mails about siimage on LKML, but Im' getting more and more confused about 'hangs' probably caused by siimage driver. I was using 15 rqsize, now 128 - doesn't matter. It happens in random moments - sometimes

at

Quoted 4 lines

boot time when drive is fscked, sometimes when I'm trying to copy large amount of data and sometimes without any particular reason after several hours. I've updated MB (a7n8x deluxe rev 2.0) BIOS but controller (which is on-board) bios seems to be untouched (4.1.25 or so ). Is there any

controller

Quoted 1 line

BIOS update which I could miss? what can be other reason

Do you have APIC enabled? If you enable both ACPI and APIC you'll have problems with DMA, using the onboard nForce2 IDE or the SATA chip. I filled a bug report and will add some debug info as soon as I recompile my kernel with APIC and debug support again.

Marcelo Penna Guerra
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQE/YjK2D/U0kdg4PFoRAjWfAJ4qsWrGksxVzme3Nm1T14n6/ocVRQCgkdhS 0216vc1WSC+ercfYTLkDJxQ=
=pLvp
-----END PGP SIGNATURE-----

#1 lore raw
Quoted 13 lines · Marcelo Penna Guerra

Witold Krecicki escreveu:

Quoted 4 lines

I've lost some of mails about siimage on LKML, but Im' getting more and more confused about 'hangs' probably caused by siimage driver. I was using 15 rqsize, now 128 - doesn't matter. It happens in random moments - sometimes

at

Quoted 4 lines

boot time when drive is fscked, sometimes when I'm trying to copy large amount of data and sometimes without any particular reason after several hours. I've updated MB (a7n8x deluxe rev 2.0) BIOS but controller (which is on-board) bios seems to be untouched (4.1.25 or so ). Is there any

Quoted 8 lines

controller

Quoted 1 line

BIOS update which I could miss? what can be other reason

Do you have APIC enabled? If you enable both ACPI and APIC you'll have problems with DMA, using the onboard nForce2 IDE or the SATA chip. I filled a bug report and will add some debug info as soon as I recompile my kernel with APIC and debug support again.

After disabling APIC in kernel/BIOS it still hanged, but when I've disabled ACPI:
12:55pm up 13:06, 4 users, load average: 0.09, 0.03, 0.01
Longest uptime I've ever seen on this HW @ Linux

Signature · 3 lines
Witold Kręcicki (adasi) adasi [at] culm.net
GPG key: 7AE20871
http://www.culm.net