Skip to contentSkip to conversation

sig11 is back: old troubles with new hardware

DISCUSSION H.Rosmanith (Kernel Mailing List) 1 participant 1 message Sep 18, 2003 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 8 lines

Yes, so what I'm saying is: try running the CPU as if it's an XP1800. If that works, you at least have a setup that works, but more importantly you also have a setup where you can work from trying to change things until it actually works at normal speed.

If you go to your shop now and tell them: "Linux crashes when I do this", they will reply: "Sure. So?". "Well linux doesn't normally crash". "Oh.". You won't get a replacement anything this way.

hi,

I'll Cc: this to linux-kernel because I think it is interesting for others too. as it turned out, the board has problems. not especially my board, but all of them.

you are right, it was something like that, blaming it on linux. allthough they have been able to reproduce the error with a non-linux memory tester, the still blamed parts of the error on linux (dorks!), because they have sold a lot of board, and none ever complained about them not working... "the error only appears only under extreme situations", they said. ha. "mke2fs /dev/sdc3" is not an extreme situation, I think.

anyway. the board in question is an "Asus A7n8x Deluxe". It has three memory slots, colors "black blue blue" (from left to right). Asus has admitted that the board *does* have problems with the black memory slot in conjunction with the nForce chipset. they hope to provide a BIOS-update which fixes the problems. I wonder when and how....*twiddles thumbs*.

so, if you own a "Asus a7n8x deluxe", use the blue memory slots only (slots 2 and 3, "dual channel mode") --- and probably only with 400Mhz FSB DDRAMs, at least rumors tell that Asus advises so.
if not, your system will crash, since linux pushes the hardware to its limits :->

regards,
herbert rosmanith