What's the point of __KERNEL_SYSCALLS__?
As far as I can tell, __KERNEL_SYSCALLS__ (see asm-*/unistd.h) are merely an indirection for calling sys_foo -- they don't seem to play around with DS or FS or whatever x86 register name got turned into an arch-independent way of saying what userspace is.
Given that, why should they exist? It only encourages monstrosities like sp8870_read_code() in drivers/media/dvb/frontends/alps_tdlb7.c that probably don't work anyway.
The following are unused:
setsid
write
read is used by DVB and the wavefront sound driver
lseek is only used by DVB
dup is used only by init/main.c and could easily call sys_dup() instead. execve is used by kmod, init/main.c, sbus/char/{bbc_,}envctrl.c and
arch/sparc64/kernel/power.c
open is used by DVB, init/main.c and wavefront.
close is used by wavefront. (DVB calls sys_close directly). _exit is used by arch/ia64/kernel/process.c
waitpid is used by kernel/workqueue.c and net/ipv4/ipvs/ip_vs_sync.c
This doesn't seem like a big list to clean up. Any objections to getting rid of them and making the calls directly? If nothing else, at least it would make it explicit when we possibly needed to be calling set_fs(KERNEL_DS) instead.
Signature · 3 lines
"It's not Hollywood. War is real, war is primarily not about defeat or victory, it is about death. I've seen thousands and thousands of dead bodies. Do you think I want to have an academic debate on this subject?" -- Robert Fisk
Quoted 2 lines · Matthew Wilcox
This doesn't seem like a big list to clean up. Any objections to getting rid of them and making the calls directly?
Here's a patch that removes them for i386 and parisc. Other arches can catch up as they see fit. Comments? I've compiled the files that aren't completely arch-specific (eg sparc or m68k).
arch/i386/kernel/process.c | 2 arch/parisc/Kconfig | 2 arch/parisc/kernel/process.c | 2 arch/parisc/kernel/smp.c | 2 drivers/char/h8.c | 3 - drivers/isdn/capi/kcapi.c | 4 + drivers/isdn/hardware/eicon/Kconfig | 2 drivers/isdn/hardware/eicon/divasmain.c | 2 drivers/macintosh/mediabay.c | 2 drivers/md/md.c | 5 - drivers/media/dvb/dvb-core/dvb_ringbuffer.c | 1 drivers/media/dvb/frontends/alps_tdlb7.c | 13 +---- drivers/media/dvb/frontends/tda1004x.c | 2 drivers/media/dvb/ttpci/av7110.c | 2 drivers/media/video/msp3400.c | 4 - drivers/net/hamradio/baycom_epp.c | 3 - drivers/sbus/char/bbc_envctrl.c | 6 -- drivers/sbus/char/envctrl.c | 7 -- drivers/scsi/cpqfcTSinit.c | 4 - drivers/scsi/cpqfcTSworker.c | 4 - drivers/scsi/oktagon_esp.c | 3 - fs/jffs2/background.c | 3 - fs/lockd/clntlock.c | 3 - fs/lockd/svc.c | 2 include/asm-i386/unistd.h | 28 ---------- include/asm-parisc/unistd.h | 72 ---------------------------- include/linux/syscalls.h | 31 ++++++++++++ init/do_mounts.c | 22 ++++---- init/do_mounts.h | 16 ------ init/do_mounts_initrd.c | 28 +++++----- init/do_mounts_md.c | 10 +-- init/do_mounts_rd.c | 30 +++++------ init/initramfs.c | 2 init/main.c | 20 +++---- kernel/kmod.c | 6 +- kernel/signal.c | 3 - kernel/workqueue.c | 5 - net/bluetooth/bnep/core.c | 2 net/bluetooth/rfcomm/core.c | 2 net/core/netfilter.c | 3 - net/ipv4/ipvs/ip_vs_sync.c | 7 -- net/sunrpc/sched.c | 2 net/sunrpc/svc.c | 2 net/sunrpc/xprt.c | 3 - sound/isa/wavefront/wavefront_synth.c | 15 ++--- sound/oss/wavfront.c | 12 +--- 46 files changed, 117 insertions(+), 287 deletions(-)
Index: arch/i386/kernel/process.c
===================================================================
RCS file: /var/cvs/linux-2.6/arch/i386/kernel/process.c,v retrieving revision 1.4
i386/kernel/process.c +0 -2
@@ -11,7 +11,6 @@* This file handles the architecture-dependent parts of process handling.. */ -#define __KERNEL_SYSCALLS__#include <stdarg.h> #include <linux/errno.h>
@@ -23,7 +22,6 @@#include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/stddef.h> -#include <linux/unistd.h> #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/user.h>
Index: arch/parisc/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/parisc/Kconfig,v retrieving revision 1.10
parisc/Kconfig +1 -1
@@ -197,7 +197,7 @@ source "net/ax25/Kconfig" source "net/irda/Kconfig" -#source "drivers/isdn/Kconfig" +source "drivers/isdn/Kconfig" #source "drivers/telephony/Kconfig"
Index: arch/parisc/kernel/process.c
===================================================================
RCS file: /var/cvs/linux-2.6/arch/parisc/kernel/process.c,v retrieving revision 1.4
parisc/kernel/process.c +0 -2
@@ -7,7 +7,6 @@* This file handles the architecture-dependent parts of process handling.. */ -#define __KERNEL_SYSCALLS__#include <stdarg.h> #include <linux/elf.h>
@@ -18,7 +17,6 @@#include <linux/ptrace.h> #include <linux/sched.h> #include <linux/stddef.h> -#include <linux/unistd.h> #include <asm/io.h> #include <asm/offsets.h>
Index: arch/parisc/kernel/smp.c
===================================================================
RCS file: /var/cvs/linux-2.6/arch/parisc/kernel/smp.c,v retrieving revision 1.2
parisc/kernel/smp.c +0 -2
@@ -16,7 +16,6 @@** the Free Software Foundation; either version 2 of the License, or ** (at your option) any later version. */ -#define __KERNEL_SYSCALLS__#undef ENTRY_SYS_CPUS/* syscall support for iCOD-like functionality */ #include <linux/autoconf.h>
@@ -49,7 +48,6 @@#include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/ptrace.h> -#include <asm/unistd.h> #include <asm/cacheflush.h> #define kDEBUG 0
Index: drivers/char/h8.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/char/h8.c,v
retrieving revision 1.1
char/h8.c +0 -3
@@ -30,9 +30,6 @@#include <linux/init.h> #include <linux/slab.h> -#define __KERNEL_SYSCALLS__ -#include <asm/unistd.h> -#include "h8.h" #define DEBUG_H8
Index: drivers/isdn/capi/kcapi.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/isdn/capi/kcapi.c,v retrieving revision 1.2
isdn/capi/kcapi.c +4 -0
@@ -79,7 +79,9 @@ capi_ctr_get(struct capi_ctr *card) {if (!try_module_get (card->owner))return NULL ; +#ifdef CONFIG_MODULES DBG ("Reserve module: %s" , card->owner->name); +#endif return card; }
@@ -87,7 +89,9 @@ static inline void capi_ctr_put(struct capi_ctr *card) {module_put (card->owner); +#ifdef CONFIG_MODULES DBG ("Release module: %s" , card->owner->name); +#endif }/* ------------------------------------------------------------- */
Index: drivers/isdn/hardware/eicon/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/isdn/hardware/eicon/Kconfig,v retrieving revision 1.1
isdn/hardware/eicon/Kconfig +1 -1
@@ -12,7 +12,7 @@ config CAPI_EICON config ISDN_DIVAS tristate "Support Eicon DIVA Server cards" - depends on CAPI_EICON && PROC_FS && PCI && m + depends on CAPI_EICON && PROC_FS && PCI help Say Y here if you have an Eicon Networks DIVA Server PCI ISDN card. In order to use this card, additional firmware is necessary, which
Index: drivers/isdn/hardware/eicon/divasmain.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/isdn/hardware/eicon/divasmain.c,v retrieving revision 1.3
isdn/hardware/eicon/divasmain.c +0 -2
@@ -9,13 +9,11 @@* of the GNU General Public License, incorporated herein by reference. */ -#define __KERNEL_SYSCALLS__#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/unistd.h> #include <linux/vmalloc.h> #include <linux/devfs_fs_kernel.h> #include <asm/uaccess.h>
Index: drivers/macintosh/mediabay.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/macintosh/mediabay.c,v retrieving revision 1.2
macintosh/mediabay.c +0 -2
@@ -10,7 +10,6 @@* as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#define __KERNEL_SYSCALLS__#include <linux/config.h> #include <linux/types.h>
@@ -21,7 +20,6 @@#include <linux/timer.h> #include <linux/hdreg.h> #include <linux/stddef.h> -#include <linux/unistd.h> #include <linux/init.h> #include <linux/ide.h> #include <asm/prom.h>
Index: drivers/md/md.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/md/md.c,v
retrieving revision 1.4
md/md.c +0 -5
@@ -39,12 +39,7 @@#include <linux/init.h> -#ifdef CONFIG_KMOD #include <linux/kmod.h> -#endif - -#define __KERNEL_SYSCALLS__ -#include <linux/unistd.h> #include <asm/unaligned.h>
Index: drivers/media/dvb/dvb-core/dvb_ringbuffer.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/media/dvb/dvb-core/dvb_ringbuffer.c,v retrieving revision 1.1
media/dvb/dvb-core/dvb_ringbuffer.c +0 -1
@@ -31,7 +31,6 @@ -#define __KERNEL_SYSCALLS__#include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h>
Index: drivers/media/dvb/frontends/alps_tdlb7.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/media/dvb/frontends/alps_tdlb7.c,v retrieving revision 1.2
media/dvb/frontends/alps_tdlb7.c +5 -8
@@ -44,12 +44,11 @@ -#define __KERNEL_SYSCALLS__#include <linux/module.h> #include <linux/init.h> #include <linux/vmalloc.h> #include <linux/fs.h> -#include <linux/unistd.h> +#include <linux/syscalls.h> #include "dvb_frontend.h"
@@ -68,8 +67,6 @@ static char * mcfile = "/usr/lib/DVB/dri#define SP8870_CODE_OFFSET 0x0A -static int errno; -static struct dvb_frontend_info tdlb7_info = { .name ="Alps TDLB7" , .type =FE_OFDM ,
@@ -161,25 +158,25 @@ static int sp8870_read_code(const char *loff_t l;char *dp; - fd =open (fn,0 ,0 ); + fd =sys_open (fn,0 ,0 );if (fd ==-1 ) {printk (KERN_INFO "%s: Unable to load '%s'.\n" , __FUNCTION__, fn);return -1 ; } - l =lseek (fd,0L ,2 ); + l =sys_lseek (fd,0L ,2 );if (l <=0 || l <SP8870_CODE_OFFSET +SP8870_CODE_SIZE ) {printk (KERN_INFO "%s: code file too small '%s'\n" , __FUNCTION__, fn);sys_close (fd);return -1 ; } -lseek (fd,SP8870_CODE_OFFSET ,0 ); +sys_lseek (fd,SP8870_CODE_OFFSET ,0 ); *fp= dp =vmalloc (SP8870_CODE_SIZE );if (dp ==NULL ) {printk (KERN_INFO "%s: Out of memory loading '%s'.\n" , __FUNCTION__, fn);sys_close (fd);return -1 ; } -if (read (fd, dp,SP8870_CODE_SIZE ) !=SP8870_CODE_SIZE ) { +if (sys_read (fd, dp,SP8870_CODE_SIZE ) !=SP8870_CODE_SIZE ) {printk (KERN_INFO "%s: Failed to read '%s'.\n" ,__FUNCTION__, fn);vfree (dp);sys_close (fd);
Index: drivers/media/dvb/frontends/tda1004x.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/media/dvb/frontends/tda1004x.c,v retrieving revision 1.1
media/dvb/frontends/tda1004x.c +0 -2
@@ -30,7 +30,6 @@*/ -#define __KERNEL_SYSCALLS__#include <linux/kernel.h> #include <linux/vmalloc.h> #include <linux/module.h>
@@ -38,7 +37,6 @@#include <linux/string.h> #include <linux/slab.h> #include <linux/fs.h> -#include <linux/unistd.h> #include <linux/fcntl.h> #include <linux/errno.h> #include "dvb_frontend.h"
Index: drivers/media/dvb/ttpci/av7110.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/media/dvb/ttpci/av7110.c,v retrieving revision 1.3
media/dvb/ttpci/av7110.c +0 -2
@@ -33,14 +33,12 @@/* for debugging ARM communication: */ //#define COM_DEBUG -#define __KERNEL_SYSCALLS__#include <linux/module.h> #include <linux/init.h> #include <linux/kmod.h> #include <linux/delay.h> #include <linux/fs.h> #include <linux/timer.h> -#include <linux/unistd.h> #include <linux/byteorder/swabb.h> #include <linux/poll.h> #include <linux/slab.h>
Index: drivers/media/video/msp3400.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/media/video/msp3400.c,v retrieving revision 1.2
media/video/msp3400.c +0 -4
@@ -50,10 +50,6 @@#include <asm/semaphore.h> #include <asm/pgtable.h> -/* kernel_thread */ -#define __KERNEL_SYSCALLS__ -#include <linux/unistd.h> -#include <media/audiochip.h> #include "msp3400.h"
Index: drivers/net/hamradio/baycom_epp.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/net/hamradio/baycom_epp.c,v retrieving revision 1.1
net/hamradio/baycom_epp.c +0 -3
@@ -59,9 +59,6 @@#include <net/ax25.h> #endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */ -#define __KERNEL_SYSCALLS__ -#include <linux/unistd.h> -/* --------------------------------------------------------------------- */ #define BAYCOM_DEBUG
Index: drivers/sbus/char/bbc_envctrl.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/sbus/char/bbc_envctrl.c,v retrieving revision 1.1
sbus/char/bbc_envctrl.c +2 -4
@@ -7,11 +7,9 @@#include <linux/kernel.h> #include <linux/sched.h> #include <linux/slab.h> +#include <linux/syscalls.h> #include <asm/oplib.h> #include <asm/ebus.h> -#define __KERNEL_SYSCALLS__ -static int errno; -#include <asm/unistd.h> #include "bbc_i2c.h" #include "max1617.h"
@@ -198,7 +196,7 @@ static void do_envctrl_shutdown(struct bprintk (KERN_CRIT "kenvctrld: Shutting down the system now.\n" ); shutting_down =1 ; -if (execve ("/sbin/shutdown" , argv, envp) <0 ) +if (sys_execve ("/sbin/shutdown" , argv, envp) <0 )printk (KERN_CRIT "envctrl: shutdown execution failed\n" ); }
Index: drivers/sbus/char/envctrl.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/sbus/char/envctrl.c,v retrieving revision 1.2
sbus/char/envctrl.c +2 -5
@@ -29,16 +29,13 @@#include <linux/miscdevice.h> #include <linux/mm.h> #include <linux/slab.h> +#include <linux/syscalls.h> #include <linux/kernel.h> #include <asm/ebus.h> #include <asm/uaccess.h> #include <asm/envctrl.h> -#define __KERNEL_SYSCALLS__ -static int errno; -#include <asm/unistd.h> -#define ENVCTRL_MINOR 162#define PCF8584_ADDRESS 0x55
@@ -1004,7 +1001,7 @@ static void envctrl_do_shutdown(void) inprog =1 ;printk (KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n" ); -if (0 >execve ("/sbin/shutdown" , argv, envp)) { +if (0 >sys_execve ("/sbin/shutdown" , argv, envp)) {printk (KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n" ); inprog =0 ;/* unlikely to succeed, but we could try again */ }
Index: drivers/scsi/cpqfcTSinit.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/cpqfcTSinit.c,v retrieving revision 1.4
scsi/cpqfcTSinit.c +0 -4
@@ -46,10 +46,6 @@#include <linux/ioport.h> // request_region() prototype #include <linux/completion.h> -#ifdef __alpha__ -#define __KERNEL_SYSCALLS__ -#endif -#include <asm/unistd.h> #include <asm/io.h> #include <asm/uaccess.h> // ioctl related #include <asm/irq.h>
Index: drivers/scsi/cpqfcTSworker.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/cpqfcTSworker.c,v retrieving revision 1.4
scsi/cpqfcTSworker.c +0 -4
@@ -32,11 +32,7 @@#include <linux/smp_lock.h> #include <linux/pci.h> -#define __KERNEL_SYSCALLS__ -#define SHUTDOWN_SIGS (sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM)) - -#include <linux/unistd.h> #include <asm/system.h> #include <asm/irq.h>
Index: drivers/scsi/oktagon_esp.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/oktagon_esp.c,v retrieving revision 1.2
scsi/oktagon_esp.c +0 -3
@@ -12,7 +12,6 @@#define USE_BOTTOM_HALF #endif -#define __KERNEL_SYSCALLS__#include <linux/module.h> #include <linux/kernel.h>
@@ -42,8 +41,6 @@#include <linux/workqueue.h> #include <linux/interrupt.h> #endif - -#include <linux/unistd.h> /* The controller registers can be found in the Z2 config area at these * offsets:
Index: fs/jffs2/background.c
===================================================================
RCS file: /var/cvs/linux-2.6/fs/jffs2/background.c,v retrieving revision 1.1
jffs2/background.c +0 -3
@@ -11,14 +11,11 @@* */ -#define __KERNEL_SYSCALLS__ -#include <linux/kernel.h> #include <linux/jffs2.h> #include <linux/mtd/mtd.h> #include <linux/completion.h> #include <linux/sched.h> -#include <linux/unistd.h> #include "nodelist.h"
Index: fs/lockd/clntlock.c
===================================================================
RCS file: /var/cvs/linux-2.6/fs/lockd/clntlock.c,v retrieving revision 1.2
lockd/clntlock.c +0 -3
@@ -6,13 +6,10 @@* Copyright (C) 1996, Olaf Kirch <[email protected]> */ -#define __KERNEL_SYSCALLS__ -#include <linux/module.h> #include <linux/types.h> #include <linux/time.h> #include <linux/nfs_fs.h> -#include <linux/unistd.h> #include <linux/sunrpc/clnt.h> #include <linux/sunrpc/svc.h> #include <linux/lockd/lockd.h>
Index: fs/lockd/svc.c
===================================================================
RCS file: /var/cvs/linux-2.6/fs/lockd/svc.c,v
retrieving revision 1.5
lockd/svc.c +0 -2
@@ -12,7 +12,6 @@* Copyright (C) 1995, 1996 Olaf Kirch <[email protected]> */ -#define __KERNEL_SYSCALLS__#include <linux/config.h> #include <linux/module.h> #include <linux/init.h>
@@ -23,7 +22,6 @@#include <linux/errno.h> #include <linux/in.h> #include <linux/uio.h> -#include <linux/unistd.h> #include <linux/slab.h> #include <linux/smp.h> #include <linux/smp_lock.h>
Index: include/asm-i386/unistd.h
===================================================================
RCS file: /var/cvs/linux-2.6/include/asm-i386/unistd.h,v retrieving revision 1.2
asm-i386/unistd.h +0 -28
@@ -370,34 +370,6 @@ __asm__ volatile ("push %%ebp ; movl %%e__syscall_return (type,__res); \ } -#ifdef __KERNEL_SYSCALLS__ - -/* -* we need this inline - forking from kernel space will result -* in NO COPY ON WRITE (!!!), until an execve is executed. This -* is no problem, but for the stack. This is handled by not letting -* main() use the stack at all after fork(). Thus, no function -* calls - which means inline code for fork too, as otherwise we -* would use the stack upon exit from 'fork()'. -* -* Actually only pause and fork are needed inline, so that there -* won't be any messing with the stack from main(), but we define -* some others too. -*/ -#define __NR__exit __NR_exit -static inline _syscall0(pid_t,setsid) -static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count) -static inline _syscall3(int,read,int,fd,char *,buf,off_t,count) -static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count) -static inline _syscall1(int,dup,int,fd) -static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp) -static inline _syscall3(int,open,const char *,file,int,flag,int,mode) -static inline _syscall1(int,close,int,fd) -static inline _syscall1(int,_exit,int,exitcode) -static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options) - -#endif -/* * "Conditional" syscalls *
Index: include/asm-parisc/unistd.h
===================================================================
RCS file: /var/cvs/linux-2.6/include/asm-parisc/unistd.h,v retrieving revision 1.1
asm-parisc/unistd.h +0 -72
79 lines not on this page · raw message
Index: include/linux/syscalls.h
===================================================================
RCS file: include/linux/syscalls.h
linux/syscalls.h new file +31 -0
@@ -0,0 +1,31 @@ +/* +* linux/syscall.h +* +* Prototypes for syscalls that get called by various bits of the kernel +*/ + +#ifndef _LINUX_SYSCALL_H +#define _LINUX_SYSCALL_H + +#include <linux/linkage.h> + +asmlinkage long sys_unlink (const char *name); +asmlinkage long sys_mknod (const char *name,int mode,dev_t dev); +asmlinkage long sys_newstat (char * filename,struct stat * statbuf); +asmlinkage long sys_ioctl (int fd,int cmd,unsigned long arg); +asmlinkage long sys_mkdir (const char *name,int mode); +asmlinkage long sys_rmdir (const char *name); +asmlinkage long sys_chdir (const char *name); +asmlinkage long sys_fchdir (int fd); +asmlinkage long sys_chroot (const char *name); +asmlinkage long sys_mount (char *dev_name,char *dir_name,char *type, +unsigned long flags,void *data); +asmlinkage long sys_umount (char *name,int flags); +asmlinkage long sys_execve (char *file,char **argv,char **envp); +asmlinkage long sys_dup (int fd); +asmlinkage long sys_read (int fd,char * buf,off_t count); +asmlinkage long sys_write (int fd,const char * buf,off_t count); +asmlinkage long sys_lseek (int fd,off_t offset,unsigned int origin); +asmlinkage long sys_setsid (void ); + +#endif /* _LINUX_SYSCALL_H */
Index: init/do_mounts.c
===================================================================
RCS file: /var/cvs/linux-2.6/init/do_mounts.c,v
retrieving revision 1.3
do_mounts.c +11 -11
@@ -63,11 +63,11 @@ static dev_t __init try_name(char *name,/* read device number from .../dev */ sprintf (path,"/sys/block/%s/dev" , name); - fd =open (path,0 ,0 ); + fd =sys_open (path,0 ,0 );if (fd <0 ) goto fail; - len =read (fd, buf,32 ); -close (fd); + len =sys_read (fd, buf,32 ); +sys_close (fd);if (len <=0 || len ==32 || buf[len -1 ] !='\n' ) goto fail; buf[len -1 ] ='\0' ;
@@ -91,11 +91,11 @@ static dev_t __init try_name(char *name,/* otherwise read range from .../range */ sprintf (path,"/sys/block/%s/range" , name); - fd =open (path,0 ,0 ); + fd =sys_open (path,0 ,0 );if (fd <0 ) goto fail; - len =read (fd, buf,32 ); -close (fd); + len =sys_read (fd, buf,32 ); +sys_close (fd);if (len <=0 || len ==32 || buf[len -1 ] !='\n' ) goto fail; buf[len -1 ] ='\0' ;
@@ -317,21 +317,21 @@ void __init change_floppy(char *fmt, ...va_start (args, fmt);vsprintf (buf, fmt, args);va_end (args); - fd =open ("/dev/root" ,O_RDWR |O_NDELAY ,0 ); + fd =sys_open ("/dev/root" ,O_RDWR |O_NDELAY ,0 );if (fd >=0 ) {sys_ioctl (fd,FDEJECT ,0 ); -close (fd); +sys_close (fd); }printk (KERN_NOTICE "VFS: Insert %s and press ENTER\n" , buf); - fd =open ("/dev/console" ,O_RDWR ,0 ); + fd =sys_open ("/dev/console" ,O_RDWR ,0 );if (fd >=0 ) {sys_ioctl (fd,TCGETS , (long )&termios); termios.c_lflag &= ~ICANON ;sys_ioctl (fd,TCSETSF , (long )&termios); -read (fd, &c,1 ); +sys_read (fd, &c,1 ); termios.c_lflag |=ICANON ;sys_ioctl (fd,TCSETSF , (long )&termios); -close (fd); +sys_close (fd); } }#endif
Index: init/do_mounts.h
===================================================================
RCS file: /var/cvs/linux-2.6/init/do_mounts.h,v
retrieving revision 1.3
do_mounts.h +1 -15
@@ -1,26 +1,12 @@ -#define __KERNEL_SYSCALLS__#include <linux/config.h> #include <linux/kernel.h> #include <linux/devfs_fs_kernel.h> #include <linux/init.h> -#include <linux/unistd.h> #include <linux/slab.h> #include <linux/mount.h> #include <linux/major.h> #include <linux/root_dev.h> - -asmlinkage long sys_unlink (const char *name); -asmlinkage long sys_mknod (const char *name,int mode,dev_t dev); -asmlinkage long sys_newstat (char * filename,struct stat * statbuf); -asmlinkage long sys_ioctl (int fd,int cmd,unsigned long arg); -asmlinkage long sys_mkdir (const char *name,int mode); -asmlinkage long sys_rmdir (const char *name); -asmlinkage long sys_chdir (const char *name); -asmlinkage long sys_fchdir (int fd); -asmlinkage long sys_chroot (const char *name); -asmlinkage long sys_mount (char *dev_name,char *dir_name,char *type, -unsigned long flags,void *data); -asmlinkage long sys_umount (char *name,int flags); +#include <linux/syscalls.h> dev_t name_to_dev_t (char *name);void change_floppy (char *fmt, ...);
Index: init/do_mounts_initrd.c
===================================================================
RCS file: /var/cvs/linux-2.6/init/do_mounts_initrd.c,v retrieving revision 1.2
do_mounts_initrd.c +14 -14
@@ -26,13 +26,13 @@ static int __init do_linuxrc(void * shelstatic char *argv[] = {"linuxrc" ,NULL , };extern char * envp_init[]; -close (old_fd);close (root_fd); -close (0 );close (1 );close (2 ); -setsid (); - (void )open ("/dev/console" ,O_RDWR ,0 ); - (void )dup (0 ); - (void )dup (0 ); -return execve (shell, argv, envp_init); +sys_close (old_fd);sys_close (root_fd); +sys_close (0 );sys_close (1 );sys_close (2 ); +sys_setsid (); + (void )sys_open ("/dev/console" ,O_RDWR ,0 ); + (void )sys_dup (0 ); + (void )sys_dup (0 ); +return sys_execve (shell, argv, envp_init); }static void __init handle_initrd (void )
@@ -45,8 +45,8 @@ static void __init handle_initrd(void)/* mount initrd on rootfs' /root */ mount_block_root ("/dev/root.old" , root_mountflags & ~MS_RDONLY );sys_mkdir ("/old" ,0700 ); - root_fd =open ("/" ,0 ,0 ); - old_fd =open ("/old" ,0 ,0 ); + root_fd =sys_open ("/" ,0 ,0 ); + old_fd =sys_open ("/old" ,0 ,0 );/* move initrd over / and chdir/chroot in initrd root */ sys_chdir ("/root" );sys_mount ("." ,"/" ,NULL ,MS_MOVE ,NULL );
@@ -55,7 +55,7 @@ static void __init handle_initrd(void) pid =kernel_thread (do_linuxrc,"/linuxrc" ,SIGCHLD );if (pid >0 ) { -while (pid !=waitpid (-1 , &i,0 )) +while (pid !=sys_wait4 (-1 , &i,0 ,NULL ))yield (); }
@@ -65,8 +65,8 @@ static void __init handle_initrd(void)/* switch root and cwd back to / of rootfs */ sys_fchdir (root_fd);sys_chroot ("." ); -close (old_fd); -close (root_fd); +sys_close (old_fd); +sys_close (root_fd);umount_devfs ("/old/dev" );if (real_root_dev == Root_RAM0) {
@@ -82,7 +82,7 @@ static void __init handle_initrd(void)if (!error)printk ("okay\n" );else { -int fd =open ("/dev/root.old" ,O_RDWR ,0 ); +int fd =sys_open ("/dev/root.old" ,O_RDWR ,0 );printk ("failed\n" );printk (KERN_NOTICE "Unmounting old root\n" );sys_umount ("/old" ,MNT_DETACH );
@@ -91,7 +91,7 @@ static void __init handle_initrd(void) error = fd; }else { error =sys_ioctl (fd,BLKFLSBUF ,0 ); -close (fd); +sys_close (fd); }printk (!error ?"okay\n" :"failed\n" ); }
Index: init/do_mounts_md.c
===================================================================
RCS file: /var/cvs/linux-2.6/init/do_mounts_md.c,v retrieving revision 1.1
do_mounts_md.c +5 -5
@@ -154,7 +154,7 @@ static void __init md_setup_drive(void)printk (KERN_INFO "md: Loading md%d: %s\n" , minor, md_setup_args.device_names[minor]); - fd =open (name,0 ,0 ); + fd =sys_open (name,0 ,0 );if (fd <0 ) {printk (KERN_ERR "md: open failed - cannot start array %d\n" , minor);continue ;
@@ -163,7 +163,7 @@ static void __init md_setup_drive(void)printk (KERN_WARNING "md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n" , minor); -close (fd); +sys_close (fd);continue ; }
@@ -209,7 +209,7 @@ static void __init md_setup_drive(void) err =sys_ioctl (fd,RUN_ARRAY ,0 );if (err)printk (KERN_WARNING "md: starting md%d failed\n" , minor); -close (fd); +sys_close (fd); } }
@@ -243,10 +243,10 @@ void __init md_run_setup(void)if (raid_noautodetect)printk (KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n" );else { -int fd =open ("/dev/md0" ,0 ,0 ); +int fd =sys_open ("/dev/md0" ,0 ,0 );if (fd >=0 ) {sys_ioctl (fd,RAID_AUTORUN ,0 ); -close (fd); +sys_close (fd); } }md_setup_drive ();
Index: init/do_mounts_rd.c
===================================================================
RCS file: /var/cvs/linux-2.6/init/do_mounts_rd.c,v retrieving revision 1.2
do_mounts_rd.c +15 -15
@@ -65,8 +65,8 @@ identify_ramdisk_image(int fd, int start/* * Read block 0 to test for gzipped kernel */ -lseek (fd, start_block *BLOCK_SIZE ,0 ); -read (fd, buf, size); +sys_lseek (fd, start_block *BLOCK_SIZE ,0 ); +sys_read (fd, buf, size);/* * If it matches the gzip magic numbers, return -1
@@ -92,8 +92,8 @@ identify_ramdisk_image(int fd, int start/* * Read block 1 to test for minix and ext2 superblock */ -lseek (fd, (start_block+1 ) *BLOCK_SIZE ,0 ); -read (fd, buf, size); +sys_lseek (fd, (start_block+1 ) *BLOCK_SIZE ,0 ); +sys_read (fd, buf, size);/* Try minix */ if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
@@ -119,7 +119,7 @@ identify_ramdisk_image(int fd, int start start_block); done: -lseek (fd, start_block *BLOCK_SIZE ,0 ); +sys_lseek (fd, start_block *BLOCK_SIZE ,0 );kfree (buf);return nblocks; }
@@ -136,11 +136,11 @@ int __init rd_load_image(char *from)char rotator[4 ] = {'|' ,'/' ,'-' ,'\\' };#endif - out_fd =open ("/dev/ram" ,O_RDWR ,0 ); + out_fd =sys_open ("/dev/ram" ,O_RDWR ,0 );if (out_fd <0 ) goto out; - in_fd =open (from,O_RDONLY ,0 ); + in_fd =sys_open (from,O_RDONLY ,0 );if (in_fd <0 ) goto noclose_input;
@@ -205,20 +205,20 @@ int __init rd_load_image(char *from)if (i && (i % devblocks ==0 )) {printk ("done disk #%d.\n" , disk++); rotate =0 ; -if (close (in_fd)) { +if (sys_close (in_fd)) {printk ("Error closing the disk.\n" ); goto noclose_input; }change_floppy ("disk #%d" , disk); - in_fd =open (from,O_RDONLY ,0 ); + in_fd =sys_open (from,O_RDONLY ,0 );if (in_fd <0 ) {printk ("Error opening disk.\n" ); goto noclose_input; }printk ("Loading disk #%d... " , disk); } -read (in_fd, buf,BLOCK_SIZE ); -write (out_fd, buf,BLOCK_SIZE ); +sys_read (in_fd, buf,BLOCK_SIZE ); +sys_write (out_fd, buf,BLOCK_SIZE );#if !defined(CONFIG_ARCH_S390 ) && !defined(CONFIG_PPC_ISERIES )if (!(i %16 )) {printk ("%c\b" , rotator[rotate &0x3 ]);
@@ -231,9 +231,9 @@ int __init rd_load_image(char *from) successful_load: res =1 ; done: -close (in_fd); +sys_close (in_fd); noclose_input: -close (out_fd); +sys_close (out_fd); out:kfree (buf);sys_unlink ("/dev/ram" );
@@ -330,7 +330,7 @@ static int __init fill_inbuf(void) {if (exit_code)return -1 ; - insize =read (crd_infd, inbuf,INBUFSIZ ); + insize =sys_read (crd_infd, inbuf,INBUFSIZ );if (insize ==0 ) {error ("RAMDISK: ran out of compressed data\n" );return -1 ;
@@ -351,7 +351,7 @@ static void __init flush_window(void)unsigned n, written;uch *in, ch; - written =write (crd_outfd, window, outcnt); + written =sys_write (crd_outfd, window, outcnt);if (written != outcnt && unzip_error ==0 ) {printk (KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n" , written, outcnt, bytes_out);
Index: init/initramfs.c
===================================================================
RCS file: /var/cvs/linux-2.6/init/initramfs.c,v
retrieving revision 1.1
initramfs.c +0 -2
@@ -1,10 +1,8 @@ -#define __KERNEL_SYSCALLS__#include <linux/init.h> #include <linux/fs.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> -#include <linux/unistd.h> #include <linux/delay.h> #include <linux/string.h>
Index: init/main.c
===================================================================
RCS file: /var/cvs/linux-2.6/init/main.c,v
retrieving revision 1.3
main.c +9 -11
@@ -9,13 +9,10 @@* Simplified starting of init: Michael A. Griffith <[email protected]> */ -#define __KERNEL_SYSCALLS__ -#include <linux/config.h> #include <linux/proc_fs.h> #include <linux/devfs_fs_kernel.h> #include <linux/kernel.h> -#include <linux/unistd.h> #include <linux/string.h> #include <linux/ctype.h> #include <linux/delay.h>
@@ -37,6 +34,7 @@#include <linux/moduleparam.h> #include <linux/writeback.h> #include <linux/cpu.h> +#include <linux/syscalls.h> #include <asm/io.h> #include <asm/bugs.h>
@@ -578,11 +576,11 @@ static int init(void * unused)unlock_kernel (); system_running =1 ; -if (open ("/dev/console" ,O_RDWR ,0 ) <0 ) +if (sys_open ("/dev/console" ,O_RDWR ,0 ) <0 )printk ("Warning: unable to open an initial console.\n" ); - (void )dup (0 ); - (void )dup (0 ); + (void )sys_dup (0 ); + (void )sys_dup (0 );/* * We try each of these until one succeeds.
@@ -592,10 +590,10 @@ static int init(void * unused)*/ if (execute_command) -execve (execute_command,argv_init,envp_init); -execve ("/sbin/init" ,argv_init,envp_init); -execve ("/etc/init" ,argv_init,envp_init); -execve ("/bin/init" ,argv_init,envp_init); -execve ("/bin/sh" ,argv_sh,envp_init); +sys_execve (execute_command, argv_init, envp_init); +sys_execve ("/sbin/init" , argv_init, envp_init); +sys_execve ("/etc/init" , argv_init, envp_init); +sys_execve ("/bin/init" , argv_init, envp_init); +sys_execve ("/bin/sh" , argv_sh , envp_init);panic ("No init found. Try passing init= option to kernel." ); }
Index: kernel/kmod.c
===================================================================
RCS file: /var/cvs/linux-2.6/kernel/kmod.c,v
retrieving revision 1.2
kmod.c +3 -3
@@ -18,12 +18,10 @@call_usermodehelper wait flag, and remove exec_usermodehelper. Rusty Russell <[email protected]> Jan 2003 */ -#define __KERNEL_SYSCALLS__#include <linux/config.h> #include <linux/module.h> #include <linux/sched.h> -#include <linux/unistd.h> #include <linux/kmod.h> #include <linux/smp_lock.h> #include <linux/slab.h>
@@ -34,6 +32,7 @@#include <linux/security.h> #include <linux/mount.h> #include <linux/kernel.h> +#include <linux/syscalls.h> #include <asm/uaccess.h> extern int max_threads, system_running;
@@ -169,7 +168,8 @@ static int ____call_usermodehelper(void retval = -EPERM ;if (current->fs->root) - retval =execve (sub_info->path, sub_info->argv,sub_info->envp); + retval =sys_execve (sub_info->path, sub_info->argv, + sub_info->envp);/* Exec failed? */ sub_info->retval = retval;
Index: kernel/signal.c
===================================================================
RCS file: /var/cvs/linux-2.6/kernel/signal.c,v
retrieving revision 1.4
signal.c +0 -3
@@ -10,12 +10,9 @@* to allow signals to be sent reliably. */ -#define __KERNEL_SYSCALLS__ -#include <linux/config.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/unistd.h> #include <linux/smp_lock.h> #include <linux/init.h> #include <linux/sched.h>
Index: kernel/workqueue.c
===================================================================
RCS file: /var/cvs/linux-2.6/kernel/workqueue.c,v
retrieving revision 1.2
workqueue.c +1 -4
@@ -14,13 +14,10 @@* Theodore Ts'o <[email protected]> */ -#define __KERNEL_SYSCALLS__ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/init.h> -#include <linux/unistd.h> #include <linux/signal.h> #include <linux/completion.h> #include <linux/workqueue.h>
@@ -202,7 +199,7 @@ static int worker_thread(void *__startuprun_workqueue (cwq);if (signal_pending (current)) { -while (waitpid (-1 ,NULL , __WALL|WNOHANG ) >0 ) +while (sys_wait4 (-1 ,NULL , __WALL|WNOHANG ,NULL ) >0 )/* SIGCHLD - auto-reaping */ ;/* zap all other signals */
Index: net/bluetooth/bnep/core.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/bluetooth/bnep/core.c,v retrieving revision 1.2
bluetooth/bnep/core.c +0 -2
@@ -29,8 +29,6 @@* $Id: core.c,v 1.20 2002/08/04 21:23:58 maxk Exp $ */ -#define __KERNEL_SYSCALLS__ -#include <linux/config.h> #include <linux/module.h>
Index: net/bluetooth/rfcomm/core.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/bluetooth/rfcomm/core.c,v retrieving revision 1.2
bluetooth/rfcomm/core.c +0 -2
@@ -31,8 +31,6 @@* $Id: core.c,v 1.42 2002/10/01 23:26:25 maxk Exp $ */ -#define __KERNEL_SYSCALLS__ -#include <linux/config.h> #include <linux/module.h> #include <linux/errno.h>
Index: net/core/netfilter.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/core/netfilter.c,v retrieving revision 1.4
core/netfilter.c +0 -3
@@ -27,9 +27,6 @@#include <net/route.h> #include <linux/ip.h> -#define __KERNEL_SYSCALLS__ -#include <linux/unistd.h> -/* In this code, we can be waiting indefinitely for userspace to * service a packet if a hook returns NF_QUEUE. We could keep a count * of skbuffs queued for userspace, and not deregister a hook unless
Index: net/ipv4/ipvs/ip_vs_sync.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/ipv4/ipvs/ip_vs_sync.c,v retrieving revision 1.2
ipv4/ipvs/ip_vs_sync.c +1 -6
@@ -18,8 +18,6 @@* messages filtering. */ -#define __KERNEL_SYSCALLS__/* for waitpid */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h>
@@ -28,7 +26,6 @@#include <linux/net.h> #include <linux/sched.h> #include <linux/wait.h> -#include <linux/unistd.h> #include <linux/completion.h> #include <linux/skbuff.h>
@@ -621,8 +618,6 @@ ip_vs_receive(struct socket *sock, char } -static int errno; -static DECLARE_WAIT_QUEUE_HEAD (sync_wait);static pid_t sync_master_pid =0 ;static pid_t sync_backup_pid =0 ;
@@ -866,7 +861,7 @@ int start_sync_thread(int state, char *mif ((pid =kernel_thread (fork_sync_thread, &startup,0 )) <0 )IP_VS_BUG (); -if ((waitpid_result =waitpid (pid,NULL , __WCLONE)) != pid) { +if ((waitpid_result =sys_wait4 (pid,NULL , __WCLONE,NULL )) != pid) {IP_VS_ERR ("%s: waitpid(%d,...) failed, errno %d\n" , __FUNCTION__, pid, -waitpid_result); }
Index: net/sunrpc/sched.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/sunrpc/sched.c,v
retrieving revision 1.1
sunrpc/sched.c +0 -2
@@ -11,12 +11,10 @@#include <linux/module.h> -#define __KERNEL_SYSCALLS__#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/mempool.h> -#include <linux/unistd.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/spinlock.h>
Index: net/sunrpc/svc.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/sunrpc/svc.c,v
retrieving revision 1.1
sunrpc/svc.c +0 -2
@@ -6,13 +6,11 @@* Copyright (C) 1995, 1996 Olaf Kirch <[email protected]> */ -#define __KERNEL_SYSCALLS__#include <linux/linkage.h> #include <linux/sched.h> #include <linux/errno.h> #include <linux/net.h> #include <linux/in.h> -#include <linux/unistd.h> #include <linux/mm.h> #include <linux/sunrpc/types.h>
Index: net/sunrpc/xprt.c
===================================================================
RCS file: /var/cvs/linux-2.6/net/sunrpc/xprt.c,v
retrieving revision 1.5
sunrpc/xprt.c +0 -3
@@ -43,8 +43,6 @@* (C) 1999 Trond Myklebust <[email protected]> */ -#define __KERNEL_SYSCALLS__ -#include <linux/types.h> #include <linux/slab.h> #include <linux/capability.h>
@@ -56,7 +54,6 @@#include <linux/mm.h> #include <linux/udp.h> #include <linux/tcp.h> -#include <linux/unistd.h> #include <linux/sunrpc/clnt.h> #include <linux/file.h>
Index: sound/isa/wavefront/wavefront_synth.c
===================================================================
RCS file: /var/cvs/linux-2.6/sound/isa/wavefront/wavefront_synth.c,v retrieving revision 1.1
isa/wavefront/wavefront_synth.c +6 -9
@@ -25,6 +25,7 @@#include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/syscalls.h> #include <linux/time.h> #include <linux/wait.h> #include <sound/core.h>
@@ -1913,15 +1914,11 @@ wavefront_reset_to_cleanliness (snd_wavereturn (1 ); } -#define __KERNEL_SYSCALLS__#include <linux/fs.h> #include <linux/mm.h> #include <linux/slab.h> -#include <linux/unistd.h> #include <asm/uaccess.h> -static int errno; -static int __init wavefront_download_firmware (snd_wavefront_t *dev,char *path)
@@ -1947,7 +1944,7 @@ wavefront_download_firmware (snd_wavefro fs =get_fs ();set_fs (get_ds ()); -if ((fd =open (path,0 ,0 )) <0 ) { +if ((fd =sys_open (path,0 ,0 )) <0 ) {snd_printk ("Unable to load \"%s\".\n" , path);return 1 ;
@@ -1956,7 +1953,7 @@ wavefront_download_firmware (snd_wavefrowhile (1 ) {int x; -if ((x =read (fd, §ion_length,sizeof (section_length))) != +if ((x =sys_read (fd, §ion_length,sizeof (section_length))) !=sizeof (section_length)) {snd_printk ("firmware read error.\n" ); goto failure;
@@ -1966,7 +1963,7 @@ wavefront_download_firmware (snd_wavefrobreak ; } -if (read (fd, section, section_length) != section_length) { +if (sys_read (fd, section, section_length) != section_length) {snd_printk ("firmware section " "read error.\n" ); goto failure;
@@ -2005,12 +2002,12 @@ wavefront_download_firmware (snd_wavefro } -close (fd); +sys_close (fd);set_fs (fs);return 0 ; failure: -close (fd); +sys_close (fd);set_fs (fs);snd_printk ("firmware download failed!!!\n" );return 1 ;
Index: sound/oss/wavfront.c
===================================================================
RCS file: /var/cvs/linux-2.6/sound/oss/wavfront.c,v retrieving revision 1.1
oss/wavfront.c +5 -7
@@ -2489,12 +2489,10 @@ static int __init detect_wavefront (int }#include "os.h" -#define __KERNEL_SYSCALLS__#include <linux/fs.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/unistd.h> -#include <asm/uaccess.h> static int errno;
@@ -2523,7 +2521,7 @@ wavefront_download_firmware (char *path) fs =get_fs ();set_fs (get_ds ()); -if ((fd =open (path,0 ,0 )) <0 ) { +if ((fd =sys_open (path,0 ,0 )) <0 ) { printk (KERN_WARNING LOGNAME "Unable to load \"%s\".\n", path);return 1 ;
@@ -2532,7 +2530,7 @@ wavefront_download_firmware (char *path)while (1 ) {int x; -if ((x =read (fd, §ion_length,sizeof (section_length))) != +if ((x =sys_read (fd, §ion_length,sizeof (section_length))) !=sizeof (section_length)) { printk (KERN_ERR LOGNAME "firmware read error.\n"); goto failure;
@@ -2542,7 +2540,7 @@ wavefront_download_firmware (char *path)break ; } -if (read (fd, section, section_length) != section_length) { +if (sys_read (fd, section, section_length) != section_length) { printk (KERN_ERR LOGNAME "firmware section " "read error.\n"); goto failure;
@@ -2581,12 +2579,12 @@ wavefront_download_firmware (char *path) } -close (fd); +sys_close (fd);set_fs (fs);return 0 ; failure: -close (fd); +sys_close (fd);set_fs (fs);printk (KERN_ERR "\nWaveFront: firmware download failed!!!\n" );return 1 ;
Signature · 3 lines
"It's not Hollywood. War is real, war is primarily not about defeat or victory, it is about death. I've seen thousands and thousands of dead bodies. Do you think I want to have an academic debate on this subject?" -- Robert Fisk
Quoted 2 lines
media/dvb/frontends/alps_tdlb7.c +0
-0
[snip]
media/dvb/frontends/alps_tdlb7.c static int sp8870_read_code(const char * · line 161
Quoted 6 lines
media/dvb/frontends/alps_tdlb7.c +1
-1@@ -161,25 +158,25 @@ static int sp8870_read_code(const char *loff_t l;char *dp; - fd =open (fn,0 ,0 ); + fd =sys_open (fn,0 ,0 );
*Ugh*
What context is it executed in? I'd tried to trace the potential callers, but I don't see immediate reasons to believe that it never can happen in user task context. It either should be shown (and commented) or we'd better switch to filp_open() and friends. Descriptor tables can be shared...
Quoted 8 lines · Matthew Wilcox
Quoted 2 lines · Matthew Wilcox
This doesn't seem like a big list to clean up. Any objections to getting rid of them and making the calls directly?
Here's a patch that removes them for i386 and parisc. Other arches can catch up as they see fit. Comments? I've compiled the files that aren't completely arch-specific (eg sparc or m68k).
asm-parisc/unistd.h type name(type1 arg1, type2 arg2, type3 · line 879
Quoted 6 lines
asm-parisc/unistd.h +0
-6-static inline int execve (char *filename,char * argv [], -char * envp[]) -{ -extern int __execve (char *,char **,char **,struct task_struct *); -return __execve (filename, argv, envp, current); -}
execve on some platforms relies on the entry stuff. Take a look at the use of the passed registers in sys_execve on x86 as an example. Simply calling sys_execve won't work. The same is true for sys_clone used to create threads.
Quoted 4 lines · Matthew Wilcox
Given that, why should they exist? It only encourages monstrosities like
sp8870_read_code()indrivers/media/dvb/frontends/alps_tdlb7.cthat probably don't work anyway.
...
Quoted 4 lines
read is used by DVB and the wavefront sound driver lseek is only used by DVB
open is used by DVB,init/main.cand wavefront. close is used by wavefront. (DVB callssys_closedirectly).
Those binary-only firmwares are a curse :-(
Anyway, we want to replace all our firmware loading code and the compiled-in firmwares with the firmware_class loader as soon as there is a usable hotplug agent available. There already are some experimental patches for av7110.c in linuxtv.org CVS.
Johannes