.asoundrc plugin setup
i have some troubles with an usb-audio device (an imic) on linux ppc (an ibook2), i think becouse of endianness related troubles..
my big trouble is that jack says:
willy@Zeryn:~$ jackd -d alsa -d hw:1 jackd 0.80.0 [...] JACK compiled with System V SHM support loading driver .. creating alsa driver ... hw:1|hw:1|1024|2|48000|nomon|swmeter|rt open Sorry. The audio interface "hw:1"doesn't support either of the two hardware sample formats that jack can use. ALSA: cannot configure capture channel starting engine engine driver not set; cannot start [...]
i've setupped an .asounrc like that:
pcm.imic {
type hw
card 1
}
ctl.imic2 {
type hw
card 1
}
pcm_slave.sl3 {
pcm imic
format S16_LE
}
pcm.imic2 {
type plug
slave sl3
}
and jack at least start, but it dont playback anything:
willy@Zeryn:~$ jackd -d alsa -d imic2 jackd 0.80.0 [...] creating alsa driver ... imic2|imic2|1024|2|48000|nomon|swmeter|rt open You appear to be using the ALSA software "plug" layer, probably [...]
You appear to be using the ALSA software "plug" layer, probably
[...] starting engine
ALSA lib pcm_hw.c:494:(snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pipe could not start playback (Broken pipe)
jackd: signal 2 received
jack main caught signal 2
received signal 15 during shutdown (ignored)
willy@Zeryn:~$
its a mine fault or alsa fault?? i think that with that .asoundrc this things should work...
tanks for attention
wil
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf