Maybe a bug with cmipci cmi8738 sound chip
Hello.
I write to you because nobody really on the alsa-user mailing list could help me solve my problem, which is related to the cmi8738 on-board soundcard on my asus mainboard. Currently i am using the alsa-modules 0.9.6 version available for the pre-made kernel-image 2.4.22 on debian.
My Problem is mainliy with the mic boost, in that it's effect is only on the speakers level and the corresponding and resulting mic sensitivity if mic boost is turned on.
However the record level remains unaffected by the activation of mic boost. This is especially a problem for me, because my head-set requires this mic boost to be turned on in order for the microphone signal to be send out in a reasonable signal strength through my voice-chat program.
Also the normal sound-recording through ec command-line is affected by this problem.
All corresponding volume sliders (mic, mic capture) are turned to maximum, and the mic as center/lfe is turned off. What can i do?
I would like to hear from you, especially if you are aware of this problem, and if there's currently anything i can do to fix this.
Regards, Attila.
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
spurious APIC interrupt , then freeze
Soon after i load the maestro3 driver on a dell c600 laptop, kernel 2.6.0-test7; i get a 'spurious APIC interrupt on CPU#0, should never happen.'
then the laptop freezes and i have to power off by pressing the power button.
what does this mean ? how can it be fixed ?
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Re: spurious APIC interrupt , then freeze
At Sun, 12 Oct 2003 23:32:53 +0200,
Quoted 10 lines · Juan
Soon after i load the maestro3 driver on a dell c600 laptop, kernel 2.6.0-test7; i get a 'spurious APIC interrupt on CPU#0, should never happen.'
then the laptop freezes and i have to power off by pressing the power button.
what does this mean ? how can it be fixed ?
does the attached patch have some influence?
Takashi
Re: spurious APIC interrupt , then freeze
In reply to a message not in the archiveAt Tue, 14 Oct 2003 17:32:43 +0200,
Quoted 15 lines · jean-charles
Quoted 13 lines · Takashi Iwai
At Sun, 12 Oct 2003 23:32:53 +0200,
Quoted 10 lines · Juan
Soon after i load the maestro3 driver on a dell c600 laptop, kernel 2.6.0-test7; i get a 'spurious APIC interrupt on CPU#0, should never happen.'
then the laptop freezes and i have to power off by pressing the power button.
what does this mean ? how can it be fixed ?
Quoted 8 lines
Quoted 2 lines
does the attached patch have some influence?
hi,
i already have tried to do that :( what really annoy me is that the freeze does not happend every time !!!!
how can i "debug" a system freeze ?
if it's a kernel panic, you can at least have the control with magic sysrq. if it's not, the last resort is NMI watchdog...
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php