natsemi oops

The 2.6.0-test-7 boots fine and works great -- until I plug in the ethernet cable. Within a second I get an oops and everything freezes. Booting with "acpi=off" makes no difference. If I boot with the ethernet cable plugged in, I get to the login prompt, and it oopses within a second. If I time it right, I can log into the machine remotely for one second before it oopses (so the natsemi driver is working). Very reproducible! /proc/kmsg is empty.

If I compile natsemi as a module, I don't get the oops. However, now the driver is not working -- I can't ping out. Everything works fine in 2.5.69, which I've been running since early July.

Here's some of the oops, taken by hand:

Process swapper (pid: 0, threadinfo=c042a000 task c03a47a0)

Stack

Call trace:

ipxitf_auto_create
ipx_rcv
netif_receive_skb
process_backlog
net_rx_action
do_softirq
do_IRQ
_stext
common_interrupt
acpi_processor_idle
cpu_idle
start_kernel
unknown_bootoption

Kernel panic: Fatal exception in interrupt

In interrupt handler -- not syncing

Configuration, lspci, and dmesg attached.

Cheers,
David

__________________________________________________________
Sign-up for your own personalized E-mail at Mail.com
http://www.mail.com/?sr=signup

CareerBuilder.com has over 400,000 jobs. Be smarter about your job search
http://corp.mail.com/careers