natsemi oops
Correction: I get the oops also when natsemi is compiled as a module. It is triggered not when the module is loaded, but when it is used the first time. Oops (some fragments below) followed by a total freeze; nothing gets logged.
Is this a known problem?
Is there a workaround?
Cheers,
David
----- Original Message -----
From: David Liontooth
Date: Mon, 20 Oct 2003 05:24:52 -0500
To: [email protected]
Subject: [2.6.0-test-7] natsemi oops
Quoted 37 lines
The 2.6.0-test-7 boots fine and works great -- until I plug in the ethernet cable. Within a second I get an oops and everything freezes. Booting with "acpi=off" makes no difference. If I boot with the ethernet cable plugged in, I get to the login prompt, and it oopses within a second. If I time it right, I can log into the machine remotely for one second before it oopses (so the natsemi driver is working). Very reproducible!
/proc/kmsgis empty.If I compile natsemi as a module, I don't get the oops. However, now the driver is not working -- I can't ping out. Everything works fine in 2.5.69, which I've been running since early July.
Here's some of the oops, taken by hand:
Process swapper (pid: 0, threadinfo=c042a000 task
c03a47a0)Stack
Call trace:
ipxitf_auto_createipx_rcvnetif_receive_skbprocess_backlognet_rx_actiondo_softirqdo_IRQ_stextcommon_interruptacpi_processor_idlecpu_idlestart_kernelunknown_bootoption
Quoted 10 lines
Kernel panic: Fatal exception in interruptIn interrupt handler -- not syncing
Configuration, lspci, and dmesg attached.
Cheers,
David
<< config-2.6.0-test7-3 >>
<< dmesg-2.6.0-test7-7 >>
<< lspci-2.6.0-test7 >>
Signature · 6 lines
__________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers