Skip to contentSkip to conversation

APM suspend on 2.6.0-test9 causes Toshiba 470CDT laptop to hang after resume

DISCUSSION Vadim 1 participant 1 message Oct 26, 2003

lore
Share & tools
lore

Vadim

author
#0 lore raw

When I suspend and later resume on this laptop it looks like everything that involves the disk breaks. For example, when I tried this after resume:

dmesg > dmesg.log
sync

it hung on sync. The kernel seems to continue working, for example I can scroll up, but anything I try to run hangs. USB seems to break as well, if I connect a card reader after resume there's no kernel messages, and its LED doesn't light. Here are some messages I copied:

(apm --suspend)
hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend ohci_hdc 000:00:0b.0: suspend D4 --> D3 ohci_hdc 000:00:0b.0: suspend to 3
ohci_hdc 000:00:0b.0: suspended

(resume, apm --suspend not returning, Ctrl+C works to abort it) ohci_hdc 000:00:0b.0: resume from state D4
ohci_hdc 000:00:0b.0: OHCI 1.0, with legacy support registers ohci_hdc 000:00:0b.0: control 0x000 HCFS=reset CBSR=0 ohci_hdc 000:00:0b.0: cmdstatus 0x00000 SOC=0 ohci_hdc 000:00:0b.0: intrstatus 0x00000000
ohci_hdc 000:00:0b.0: intrenable 0x00000000
ohci_hdc 000:00:0b.0: USB restart
usb usb1: USB disconnect, address 1
usb 1-1: usb_disable_device nuking all URBs
ohci_hcd 0000:00:0b.0: shutdown urb c1297f00 pipe 40408180 ep1in-intr
usb usb1: unregistering interface 1-0:1.0
usb usb1: hcd_unlink_urb c1297f00 fail -22

Thanks in advance

Signature · 2 lines
Use the PGP path finder to find a trust path to my key:
http://the.earth.li/~noodles/pathfind.html