Skip to contentSkip to conversation

CMI8738-MC6 surround40 plugin on 4 SP systems]

DISCUSSION Takashi Iwai 2 participants 5 messages Oct 31, 2003 – Nov 7, 2003 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

At Thu, 30 Oct 2003 12:42:39 -0500,

Quoted 7 lines · Marcel

I've been trying to finetune my cmipci for several weeks now. And this is
the best way I've been able to get transparent operation with various audio
material: stereo, mono, 4.0, 5.1. The main problem being no surround sound iif "Exchange DAC" setting was not set, and sound on the rear speakers only if it was.

ah, this might be true.
does it happen both on 4.0 and 5.1 outputs?
i don't remember that it's necessary for 5.1 at the last time i tested.

Quoted 5 lines

I think the following patch should be considered. It puts the surround sound on the rear speakers, where it should be when using the plugin surround40, and on front speakers in normal stereo/mono mode. I've been testing it for several days now and it seems better than the original CMI8738-MC6.pcm.

looks fine. i'll add it.

perhaps we should simply remove this control from user and handle internally for the MC6 chip.

thanks,

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/

#2 lore raw
Quoted 10 lines · * Takashi Iwai ([email protected]) wrote:

At Thu, 30 Oct 2003 12:42:39 -0500,

Quoted 7 lines · Marcel

I've been trying to finetune my cmipci for several weeks now. And this is
the best way I've been able to get transparent operation with various audio
material: stereo, mono, 4.0, 5.1. The main problem being no surround sound iif "Exchange DAC" setting was not set, and sound on the rear speakers only if it was.

Quoted 4 lines

ah, this might be true.
does it happen both on 4.0 and 5.1 outputs?
i don't remember that it's necessary for 5.1 at the last time i tested.

With surround40 plugin, 4 speakers, yes it's needed for both 4.0 and 5.1 material. Applications such as mplayer or xine will remix 5.1 material to 4 channels. For 6 speakers systems, I really don't know.

Quoted 3 lines

perhaps we should simply remove this control from user and handle internally for the MC6 chip.

I agree. Its usage is confusing and may results in improper operation

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/

#3 lore raw

At Fri, 31 Oct 2003 12:39:18 -0500,

Quoted 12 lines · Marcel
Quoted 10 lines · * Takashi Iwai ([email protected]) wrote:

At Thu, 30 Oct 2003 12:42:39 -0500,

Quoted 7 lines · Marcel

I've been trying to finetune my cmipci for several weeks now. And this is
the best way I've been able to get transparent operation with various audio
material: stereo, mono, 4.0, 5.1. The main problem being no surround sound iif "Exchange DAC" setting was not set, and sound on the rear speakers only if it was.

Quoted 8 lines
Quoted 4 lines

ah, this might be true.
does it happen both on 4.0 and 5.1 outputs?
i don't remember that it's necessary for 5.1 at the last time i tested.

With surround40 plugin, 4 speakers, yes it's needed for both 4.0 and 5.1 material. Applications such as mplayer or xine will remix 5.1 material to 4 channels. For 6 speakers systems, I really don't know.

could you try surround51 and check whether it somehow works?

Quoted 5 lines
Quoted 3 lines

perhaps we should simply remove this control from user and handle internally for the MC6 chip.

I agree. Its usage is confusing and may results in improper operation

how about the attached patch?

Takashi

#4 lore raw
Quoted 19 lines · * Takashi Iwai ([email protected]) wrote:

At Fri, 31 Oct 2003 12:39:18 -0500,

Quoted 17 lines · Marcel
Quoted 14 lines · * Takashi Iwai ([email protected]) wrote:

At Thu, 30 Oct 2003 12:42:39 -0500,

Quoted 7 lines · Marcel

I've been trying to finetune my cmipci for several weeks now. And this is
the best way I've been able to get transparent operation with various audio
material: stereo, mono, 4.0, 5.1. The main problem being no surround sound iif "Exchange DAC" setting was not set, and sound on the rear speakers only if it was.

ah, this might be true.
does it happen both on 4.0 and 5.1 outputs?
i don't remember that it's necessary for 5.1 at the last time i tested.

Quoted 5 lines
Quoted 3 lines

With surround40 plugin, 4 speakers, yes it's needed for both 4.0 and 5.1 material. Applications such as mplayer or xine will remix 5.1 material to 4 channels. For 6 speakers systems, I really don't know.

could you try surround51 and check whether it somehow works?

I tried. It's ok with stereo material. With 5.1 material, xine refuses to use it because I have 4 speakers only. Mplayer will use it but 2 channels only. Seems there is no way to force applications to use 6 channels when I got only 4 speakers. "Mplayer -ao alsa9:surround51 -channels 6" gives an error. And I don't have any 5.1 sound file in wav or mp3 format for aplay or alsaplayer to try. Never been able to locate some. But I suspect it will fail too. I think you'll need someone with 6 physical speakers to have this verified.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

perhaps we should simply remove this control from user and handle internally for the MC6 chip.

I agree. Its usage is confusing and may results in improper operation

how about the attached patch?

Great job! If I understand how it works, the mixer setting is gone for the 8738-MC[46] chipsets, and still there for plain 8[37]38. Works very well here, no more confusion. Multi-channel sound is enabled automatically. Front material is always in front, and surround material always in rear.

Adjustment is unconventional, but straightforward for surround material:

1 - Master at 0.
2 - Adjust rear volume with PCM near maximum required.
3 - Increase front volume with Master to obtain rear-front balance. 4 - Decrease PCM to lower volume on all 4 speakers.

Unusual, but that's the way its operates.

Don't forget to remove the following block in alsa/cards/CMI8738-MC6.conf if you added it in the CVS, otherwise you'll get errors when using surround40 as "Exchange DAC" is no more:

# {

#                               name "Exchange DAC"
#                               lock true
#                               preserve true
#                               value true

# }

May I suggest adding this patch to the CVS?

One more control that deserves to go in mixer: "3D Control Switch". It doesn't work, never did, does nothing at all.

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/

#5 lore raw

At Tue, 4 Nov 2003 19:35:37 -0500,

Quoted 50 lines · Marcel
Quoted 19 lines · * Takashi Iwai ([email protected]) wrote:

At Fri, 31 Oct 2003 12:39:18 -0500,

Quoted 17 lines · Marcel
Quoted 14 lines · * Takashi Iwai ([email protected]) wrote:

At Thu, 30 Oct 2003 12:42:39 -0500,

Quoted 7 lines · Marcel

I've been trying to finetune my cmipci for several weeks now. And this is
the best way I've been able to get transparent operation with various audio
material: stereo, mono, 4.0, 5.1. The main problem being no surround sound iif "Exchange DAC" setting was not set, and sound on the rear speakers only if it was.

ah, this might be true.
does it happen both on 4.0 and 5.1 outputs?
i don't remember that it's necessary for 5.1 at the last time i tested.

Quoted 5 lines
Quoted 3 lines

With surround40 plugin, 4 speakers, yes it's needed for both 4.0 and 5.1 material. Applications such as mplayer or xine will remix 5.1 material to 4 channels. For 6 speakers systems, I really don't know.

could you try surround51 and check whether it somehow works?

I tried. It's ok with stereo material. With 5.1 material, xine refuses to use it because I have 4 speakers only. Mplayer will use it but 2 channels only. Seems there is no way to force applications to use 6 channels when I got only 4 speakers. "Mplayer -ao alsa9:surround51 -channels 6" gives an error. And I don't have any 5.1 sound file in wav or mp3 format for aplay or alsaplayer to try. Never been able to locate some. But I suspect it will fail too. I think you'll need someone with 6 physical speakers to have this verified.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

perhaps we should simply remove this control from user and handle internally for the MC6 chip.

I agree. Its usage is confusing and may results in improper operation

how about the attached patch?

Great job! If I understand how it works, the mixer setting is gone for the 8738-MC[46] chipsets, and still there for plain 8[37]38. Works very well here, no more confusion. Multi-channel sound is enabled automatically. Front material is always in front, and surround material always in rear.

Quoted 8 lines

Adjustment is unconventional, but straightforward for surround material:

1 - Master at 0.
2 - Adjust rear volume with PCM near maximum required.
3 - Increase front volume with Master to obtain rear-front balance. 4 - Decrease PCM to lower volume on all 4 speakers.

Unusual, but that's the way its operates.

hmm, it seems there is something wrong in the SB-style mixer code. perhaps we need to put some delay.

anyway, the changes are now applied to cvs.

Quoted 2 lines

One more control that deserves to go in mixer: "3D Control Switch". It doesn't work, never did, does nothing at all.

well, it works for the older model.
it's a 3D-enhancement and not really 3d thing.
i'm not sure whether this doesn't work for all new models (> 037), so it still remains there. we can remove it later after confirming that all new chips don't support this.

Takashi

-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/